ON3P SKIS Discussion

[auvgeek]

Yeah, it's really too bad ON3P doesn't make a 174 Wren 108, that would be a top contender for my girl as well (to replace her Dakotas).

If she's on the Navis, you might consider the Corvus ... if the 175 isn't too long. My girl tours on the 175 Corvus Freebird and loves them. Just a final random idea and then I'll butt out.

[sf]

Ok, thanks. I'll look into a few options, and probably make a dedicated thread.

Now back to ON3P

[Adrgha]

To those of you who have gotten your C&D's: how much do they weight?

[kid-kapow]

184s average at 2335g according to the good folks over at ON3P

[Bruce Springskiin]

Has anyone been on both the Wrenegade and the Fischer Ranger? Any comparisons between the two skis would be great. I have a set of Ranger 108s and I'm trying to decide if a Wrenegade 98 is in my future

Here is your difference




This is a Ranger 98 next to a Steeple 108, now essentially a Wren in Tour layup.


and another

Notice the difference in edge material. I have never compressed an edge on any of my ON3P's and never had a core shot, but i have hit a number of rocks. Anyone want to buy some P14s with free rangers attached?

[Bandit Man]

My current ON3P quiver:

193 Super Goat (normal flex) with STH2 16
189 Billy Goat (2018) with STH2 16
186 Billy Goat (2014) with STH2 16
189 Wrenegade 108 (getting STH2 16)

[Norseman]

Those are the most motherfucking patriotic skis that have ever been made. I was just compelled to salute them. Outstanding work!

Can I take them for a spin? My Blue Langes will even match.

[MHSP1497]

My current ON3P quiver:

193 Super Goat (normal flex) with STH2 16
189 Billy Goat (2018) with STH2 16
186 Billy Goat (2014) with STH2 16
189 Wrenegade 108 (getting STH2 16)

i dig it, man. Similar to my own quiver but leaning more charger than mine... i’m also a dedicated fan of STH2 bindings. Maybe we can meetup somewhere in the PNW this season and ride.

[Adrgha]

184s average at 2335g according to the good folks over at ON3P

Thanks. That's actually a hair lighter than I was expecting.

[galibier_numero_un]

Ok, thanks. I'll look into a few options, and probably make a dedicated thread.

Now back to ON3P

My favorite ON3P ski, AND top sheet#l!

... Thom

[Bandit Man]

i dig it, man. Similar to my own quiver but leaning more charger than mine... i’m also a dedicated fan of STH2 bindings. Maybe we can meetup somewhere in the PNW this season and ride.

Yeah, I need to connect with more of the PNW mags this year. Been doing most of my skiing with Bandit Jr and other non-Mags. Mostly ski Stevens and Baker these days. I need to get down to Crystal more often to get the SG’s a little more room to run.

Also, don’t let the quiver fool you, there are a lot of guys who would ski them better than I do. Those 186 BG’s are my all-time favorite but that new 189 BG is really growing on me.

[travel_to_ski]

https://www.newschoolers.com/forum/t...ado-Demo-Fleet

[auvgeek]

That shot really shows how much taper the Jessie 108 has. (2nd from left)
https://images.newschoolers.com/imag...04/909504.jpeg

[jackattack]

https://www.newschoolers.com/forum/t...ado-Demo-Fleet

are you the rep? I might be interested in picking up the 161 j108 for my wife and selling her 166.

[Norseman]

are you the rep? I might be interested in picking up the 161 j108 for my wife and selling her 166.

Let me know if you decide to sell the 166, please.

[travel_to_ski]

are you the rep? I might be interested in picking up the 161 j108 for my wife and selling her 166.

Nope, not affiliated in any way. Just a heads up if any of you were looking to score anything.

[jackattack]

Let me know if you decide to sell the 166, please.

I think we're gonna stick.

[galibier_numero_un]

Does Powtron's replacement hang out on TGR?

... Thom

[iggyskier]

Iggy, you guys sell in Yurp, or do shipping costs (or something else) get in the way?

We ship FedEx International direct to most of the world. It's next to impossible for us to scale to the size needed to sustain the business on dealer margins, so we've cut our dealer network a lot and it is now very limited.

As far as what we charge, we ship free domestically, charge $30 to Canada, and charge $99 internationally.

Shipping is pretty expensive these days, with Canada normally running us around $75, UK $100-120, Mainland Europe Metro areas and Japan running $110-130, and Australia, New Zealand, Scandinavia, South America, and the mountainous areas of Mainland Europe $120-165. If the shipment includes bindings, we end up getting hit with dimensional weight and those rates often go up 50-75%.

We might or might not do what we can to lower import costs by about 50%...

If you need an estimate of what you are looking at to import US-made skis, you can use this thread:
https://www.tetongravity.com/forums/...tes?highlight=

are you the rep? I might be interested in picking up the 161 j108 for my wife and selling her 166.

grant AT on3pskis DOT com

Does Powtron's replacement hang out on TGR?

... Thom

Just me these days. If you need to reach us, best way is email/chat or just call the factory direct.

[Bruce Springskiin]

...
But the stoke is high here today. Spent the day walking around the resort looking at Gazex sites for avi control, then it snowed

Then I came home to these



- I am here for the stoke

[Bruce Springskiin]

... and I just found this sweatshirt shirt I was not expecting! You rock ON3P.



- I am here for the stoke, very stoked

[PowTron]

Does Powtron's replacement hang out on TGR?

... Thom

Scott has your TGR ON3P world on lockdown [emoji869]

I’m still alive, just working with Dentists a lot these days (no, I’m not joking).

Let’s shred this winter!

[jackattack]

I missed the no beer sign on my tour of the factory.

[iggyskier]

“No beer on CNC”

[rocca]

Not mine, but though you all would be interested. 2018 BG 189 with one mount - Denver - $350

https://denver.craigslist.org/spo/d/...707186123.html