Intuition liners

[m3192c]

Looking for some help. Are these actually intuition brand liners? There isn't the brand logo or patent logo but I know companies like scarpa use their liners. The seller says they are but I have no way of identifying them as intuition. Any help is appreciated. Also note the arrow loop logo on the inside top of the liner. What brand is that? Thanks!
mec.ca/en/gearswap/post/588598
(as a new user the site wont let me copy the URL)

[LeeLau]

Looking for some help. Are these actually intuition brand liners? There isn't the brand logo or patent logo but I know companies like scarpa use their liners. The seller says they are but I have no way of identifying them as intuition. Any help is appreciated. Also note the arrow loop logo on the inside top of the liner. What brand is that? Thanks!
mec.ca/en/gearswap/post/588598
(as a new user the site wont let me copy the URL)

These look like Powerwraps. It's hard to say for sure though as I don't know which brand has that logo

[retirwntm]

I'm gonna look thru this thread for info but anyone with mercuries (or Vulcans) have issues with pro tour liners specifically fitting their calves?

I have a pair of older packed out power wraps from krypton pros that fit great in my mercuries. I can't even get my legs into the pro tours in the mercs. Like not even close. I do have decent sized calves. I also like moonlight cruises.

[XXX-er]

You tried moving the ladders of course?

[LeeLau]

I got Mercuries and Vulcans and move the ladders to have them fit my calves with ProTours

[retirwntm]

^ I moved the ladders. I can hardly get my damned legs / feet in them let alone close them to buckle them. Seems to me the top part of the intuition cuff has way more mass than the wrap did.

[m3192c]

These look like Powerwraps. It's hard to say for sure though as I don't know which brand has that logo

Thanks, I emailed Intuition directly but haven't had a response. The liners say "made in France" as opposed to Canada (I would assume) so i'm skeptical.

[skiing-in-jackson]

Question for everyone, how long do Intuition liners "last"?

About this long:

[XXX-er]

Thanks, I emailed Intuition directly but haven't had a response. The liners say "made in France" as opposed to Canada (I would assume) so i'm skeptical.

I didn't/couldn't actualy see the pict of the liners but "made in france" sounds more like the conform'ables eh?

[m3192c]

I didn't/couldn't actualy see the pict of the liners but "made in france" sounds more like the conform'ables eh?

Here is the pic, thanks!

[Meadow Skipper]

^^^Old Palaus, I think.
http://www.palau-boutique.com/comfor...erformance.cfm

Probably out of some Scarpa T-Races.

[XXX-er]

Hmmm, maybe out of some full tilts or dalbellos ?

don't recognise them but they DO look like PW's

[Meadow Skipper]

If the seam runs down the middle of the sole then I'd bet money that they're old Palaus like the ones in Scarpa T-1/T-Race tele boots. Intuitions have a foot-shaped sole stitched in around the sides of the foot - I forget what that construction is called, maybe board lasted?

[skuff]

Here is the pic, thanks!

Those look similar to the liners that came with my old Flexon Pro boots. Does the cuff of the liner have "Thermo Inner" printed on it?

[SeatownSlackey]

Those look like scarpa plus fit to me

[Dromond]

Those red liners look like the ones I had in yellow Raichle Flexons circa 2003

[m3192c]

Those look similar to the liners that came with my old Flexon Pro boots. Does the cuff of the liner have "Thermo Inner" printed on it?

Yes they do! Actually I now believe they are "Thermoflex" liners that came in Raichle boots. Does that make sense?

[skuff]

Yes they do! Actually I now believe they are "Thermoflex" liners that came in Raichle boots. Does that make sense?

It does make sense. I have 2 pairs of those, 1 has a seam down the center of the foot and the other has a foot shaped sole ( ala Meadow Skipper). Both were professionally moulded using the Intuition stack heater thing, exactly like the Full Tilt Intuition liners I had done.

[m3192c]

Thanks for the help everyone, great forum going on here!
To maybe confirm or confuse matters, Palau wrote me back confirming they are Palau's from Raichle or Kneissl, front quarter flap 11mm STIFF and 10mm cuff high rated EVA.
Cheers!

[Eluder]

just for discussion has anyone baked the liners with padding around the ankle for support and better heel hold? I am thinking about adding it before the bake apposed to after.

[plugboots]

Did the search jong, etc. TGR15 no longer viable. Any new code?

[The SnowShow]

Question: How does the Intuition® Speed Pro G (comes in a Scarpa TX Comp Tele Boot) compare to a Dreamliner, Luxury Liner or Pro Tongue?

I contacted Intuition awhile ago and haven't been able to get a response.

Also, in people's experiences with the Pro Tongue: how much stiffer has it made your boot?

[LeeLau]

Question: How does the Intuition® Speed Pro G (comes in a Scarpa TX Comp Tele Boot) compare to a Dreamliner, Luxury Liner or Pro Tongue?

I contacted Intuition awhile ago and haven't been able to get a response.

Also, in people's experiences with the Pro Tongue: how much stiffer has it made your boot?

No idea re question 1.

Quest 2. Probably 10- 15% stiffer. It's a beast

[uglymoney]

Yep it makes a big difference. I have Cochise 120's and they were too soft (I'm 6' 1.5" and about 200 lbs). Pro tongues and they are perfect flex wise.

[CaliBrit]

Did the search jong, etc. TGR15 no longer viable. Any new code?

No new code, they hook us up majorly well with the group buy.