Pivot 2.0

[Mustonen]

Have some orange ones made 7/8/24. Already mounted so mise well ski them.

I bet I don’t break them.

[bearcub69]

I purchased a set last month before this thread pointed out this was a common "problem". just checked the box and mine were produced in May.. guess well see what happens.. even if they do crack I would assume look will be pretty good about replacing.. fingers crossed

[FloridaSnow]

Have some orange ones made 7/8/24. Already mounted so mise well ski them.

I bet I don’t break them.

orange 2.0?

[FloridaSnow]

I purchased a set last month before this thread pointed out this was a common "problem". just checked the box and mine were produced in May.. guess well see what happens.. even if they do crack I would assume look will be pretty good about replacing.. fingers crossed

they’re being very helpful currently with everyone since this is a “known” issue to them.

[Mustonen]

orange 2.0?

Yup

[FloridaSnow]

Yup

customs? Haven’t seen any orange 2.0 as color options. Pics?

[Mustonen]

Looks like I’m a damn liar. Snowcountry’s seem to be 1.0. My bad.

[FloridaSnow]

Looks like I’m a damn liar. Snowcountry’s seem to be 1.0. My bad.

ah ya. The neon orange ones. Those look really good in person but ya 1.0’s.

[FloridaSnow]

How about some more 2.0 fuckery.

so evidently look at some point put out pairs with incorrect arms with a smaller diameter thread size. The bases don’t seem to be stamped 2.0 either though they are clearly 2.0 bases. And the threads are too small compared to the correct threads. They also won’t screw into a 1.0 either.

here’s a pair of 15’s with the smaller threads and 18’s with the correct larger thread. If you buy replacement bases they should arrive with the larger thread size.

don’t have an answer about this yet but working on it.

[bearcub69]

damn, appreciate all the updates/info FloridaSnow

[DarthMarkus]

How about some more 2.0 fuckery.

so evidently look at some point put out pairs with incorrect arms with a smaller diameter thread size. The bases don’t seem to be stamped 2.0 either though they are clearly 2.0 bases. And the threads are too small compared to the correct threads. They also won’t screw into a 1.0 either.

here’s a pair of 15’s with the smaller threads and 18’s with the correct larger thread. If you buy replacement bases they should arrive with the larger thread size.

don’t have an answer about this yet but working on it.

Very peculiar. Glad I ordered the 18s if the 15s are supposed to be a smaller gauge. Hopefully don't run into issues with the cracks.

Sent from my ThinkPhone by motorola using Tapatalk

[waxman]

Looks like (and I'm guessing) somehow you got one of the samples from trade shows last year?
Haven't seen any "cracks" in my world yet.

[FloridaSnow]

damn, appreciate all the updates/info FloridaSnow

glad to help

Very peculiar. Glad I ordered the 18s if the 15s are supposed to be a smaller gauge. Hopefully don't run into issues with the cracks.

Sent from my ThinkPhone by motorola using Tapatalk

so they’re both supposed to be the larger threads regardless of 15/18. Just seems at some point look produced some with the incorrect smaller size. No rhyme or reason why at this point.

Looks like (and I'm guessing) somehow you got one of the samples from trade shows last year?
Haven't seen any "cracks" in my world yet.

another pair of 15’s popped up with the smaller arms. So clearly more than 1 made it out into the wild.

[K1mJ0ngTr1ll]

Just noticed I have a pair that has the little arms. Haven’t had an issue skiing but you can definitely see the difference.

[FloridaSnow]

Just noticed I have a pair that has the little arms. Haven’t had an issue skiing but you can definitely see the difference.

shouldn’t be any issue skiing. Issue Coke if you’d need to replace the base or wanted to swap brakes. Replacement bases should be the proper larger thread. Haven’t got a response yet how look would handle this.

[TahoeJosh]

shouldn’t be any issue skiing. Issue Coke if you’d need to replace the base or wanted to swap brakes. Replacement bases should be the proper larger thread. Haven’t got a response yet how look would handle this.

Do the 2.0 replacement brake sets come with the “tubes” that fit into the dildo like the 1.0’s did? If so, then as long as the tube fits into the dildo, the replacements would be compatible (but a bit of a PITA to swap out).

[stealurface831]

Do the 2.0 replacement brake sets come with the “tubes” that fit into the dildo like the 1.0’s did? If so, then as long as the tube fits into the dildo, the replacements would be compatible (but a bit of a PITA to swap out).

recently ordered 1.0 brake assemblies but was mistakenly sent 2.0 and they came with the adjustment arms. Also just replaced adjustment arms on an old pair of FKS and it was indeed a massive pain in the ass that involved a lot of filing and riveting and is generally something i do not recommend.

[bearcub69]

does anyone find the new 2.0 brakes to be slightly less accommodating with larger waisted skis?
My 1.0 115 brakes could easily go on 120+ mm skis, but it seems my 105mm 2.0 brakes wouldn't be able to go on anything 110+ without bending.

Anyone running 1.0 105mm brakes on a 110+ ski?

[ticketchecker]

^^ curious about two.oh ninety five brakes on a oneohtwo

[FloridaSnow]

^^ curious about two.oh ninety five brakes on a oneohtwo

should be no issue at all

[FloridaSnow]

does anyone find the new 2.0 brakes to be slightly less accommodating with larger waisted skis?
My 1.0 115 brakes could easily go on 120+ mm skis, but it seems my 105mm 2.0 brakes wouldn't be able to go on anything 110+ without bending.

Anyone running 1.0 105mm brakes on a 110+ ski?

105 on a 110 is no problem. But how much wider are you talking over 110

[CYJ]

Pivot 15 2.0s on sale all sizes at Dstructure for $250 usd. Canadian shop but ordered several times from them from US no prob.

Not a pivot guy but at about $200 off retail (thanks weak CAD) thought I’d share. Corbetts is sold out of them last I checked

[bearcub69]

105 on a 110 is no problem. But how much wider are you talking over 110

112mm to be exact

[FloridaSnow]

112mm to be exact

should work. Moment does 95’s on the dw104.

[altacoup]

[emoji638]][emoji640][emoji639]][emoji637][emoji[emoji6[emoji640][emoji638]][emoji640][emoji639]][emoji6[emoji640][emoji637]][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]][emoji640]]Pivot [emoji637][emoji6[emoji640][emoji637]] [emoji638].[emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]]s on sale all sizes at Dstructure for $[emoji638][emoji6[emoji640][emoji637]][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]] usd. Canadian shop but ordered several times from them from US no prob.

Not a pivot guy but at about $[emoji638][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]] off retail (thanks weak CAD) thought I’d share. Corbetts is sold out of them last I checked

Are the prices listed on their website in usd? Seems odd. If they’re listed in cad there are some insane deals.


Sent from my iPad using [emoji638]][emoji640][emoji640]][emoji640][emoji638][emoji638][emoji638]]TGR Forums