Am I correct in my understanding that there's no way to convert fks 14s ( ~2014) from 5355 to gripwalk?
There's no way I can afford to convert them all to 15s.
Sent from my iPhone using TGR Forums
The 12 and 14-din toe was redesigned for the gripwalk afd. The older toes are stuck with whatever configuration they were sold with afaik.
Depending on how many you need this might be a more affordable option:
- Buy one set of 15 toes (might be tough to find, can just buy full 15s and sell the heels)
- Buy one set of cast toe pedestals ($100) and AFDs ($15)
- For however many skis you need - toe shims ($20) and screw hardware pack ($16)
I have this setup on a few pairs of skis - permanent heel + cast toe, and just move the toe from ski to ski. Takes like 5 seconds.
YES.
I actually have one cast setup already. Digging through the website for parts asap.
I'll have to look at each initial mount pretty carefully after pulling the toes off, but you've probably saved my bank and my skiing.
Thank you!
Sent from my iPhone using TGR Forums
p14 is not cast compatible
No problem dude. Here’s what you need per additional ski you’re gonna cast, $36 / ski:
- 1 of these - https://casttouring.com/collections/...cts/screw-pack
- 1 of these - https://casttouring.com/collections/.../toe-shim-pair
If you want to tour on more than one castified setup then you have a couple options. You could just buy the second ski kit instead of the parts I listed above, which is $75. Or you could just throw inserts into the holes for the brake lock / riser thing. I did the inserts since I’ll rarely be touring on other skis I have castified, but it’s nice to have the option.
I know we've talked about the touch up paint for the Orange FKS but has anyone used the paint to do a custom job? Thinking of using it to paint a pair of raw P15s.
RE: both messages: I shall ask
Sent from my SM-G965U1 using Tapatalk
Ahh, he changed his mind on colors so hasn't actually proceeded with the plan. I'll let you know (phatty) when he gets it done in the next month or so, but I won't know how they hold up until next season, probably (EWG).
Red pivots. Mmmmmm.
Sent fra min LYA-L29 via Tapatalk
I mean sure, it’s red. But orange is still the correct answer.
focus.
Obviously. I meant red red. The possibilities of powdercoating! Buuuut. The metal is aluminium, right? Would work to just anodize them. Probably less work overall.
Sent fra min LYA-L29 via Tapatalk
WTB:
115mm Pivot heels with din 14 or higher
Ive gotta pair of white pivot 18 toe pieces, good condition, no screws, $100 shipped within US of A.
I have a 14 din WTR era set with a toe piece that is missing the part to actuate the alpine to WTR mode. Looking to sell or to buy a WTR toe to match
Sent from my SM-G960U using TGR Forums mobile app
Bookmarks