That’s a well-trained lady forty. Can sure see the GSC in her.
My curing tools
1. Collapsing drying rack
https://www.walmart.com/ip/Tomshoo-6...E&gclsrc=aw.ds
2. Fans - to blow across the drying rack. I use a small one from the grow chamber and a big one from my office.
3. Mini hygrometers
https://www.amazon.com/Veanic-Electr...s%2C223&sr=8-5
4. Mason jars
I trim wet, segregate into big buds, mids and popcorn, then put the bud on the drying racks with plenty of gentle air blowing over the bud.
When the outsides of the buds are crispy to the touch they are ready to jar. That will be quicker for the small bud, longer for colas.
Toss a hygrometer into bottom of each jar, facing down. Fill with bud to about 2/3 full and seal.
Let sit in cool space out of sunlight for two days - do not open before unless RH > 85%. You are trying to equalize RH in jar. Gently shake and/or lay the jar on its side to allow air betw the individual buds.
If RH>85% pull from jar and place on either a cookie sheet or the drying rack for another 12 hours. Add airflow if really wet. Rejar and wait for at least a day before opening. You’re still in equalization mode.
Once you get RH<80% via the above it’s time to burp a couple of times per day. Longer open times at first finishing with just a quick smell. Let your hygrometers guide you. Don’t forget to gently shake the jars and or lay them on their sides a few times per day for airflow. I shoot for 10-14 days to get RH down to 63%. Don’t try to rush it.
Remember I’m on the dry side of the hill with lower ambient RH. OTOH airflow and low ambient humidity is my only way of getting moisture out of the plant material. YMMV
Bookmarks