Anyone have spx brakes in 110 or 115?
Anyone have spx brakes in 110 or 115?
Well, fantastic. I've just trashed one of my 95mm brake assemblies.
I'm in search of 95's. I could buy a single one or I could swap your 95s for a pair of 115s I have (they are in great shape). LMK if you have anything.
I have a pair of 110 brakes that I would like to swap for some narrow SPX brakes (70 to 85 mil)Quote:
Originally Posted by eddiecut
My Rossi FKS binding broke (110 brake) so I’m looking to either replace this part (see pic) or the rear part of the binding. Any help would be GREATLY appreciated
Attachment 508201
Attachment 508202
Try to warranty that. I've had a couple friends with the same thing - shouldn't happen and Look gave them replacements iircQuote:
Originally Posted by The SnowShow
ISO fatty breaks (130s). Have skinny 75s could trade. Open to pedestals or just breaks.
Sent from my iPhone using Tapatalk
If you're still looking I've got a pairQuote:
Originally Posted by t-the-east
I just sent you a PM. I'm in search of 105's but 115's would probably do. I've got a brand new set of 95 brakes. Would prefer to just trade the brakes so I can keep the dildos/rest of the brake assembly to match the binding. Thanks!Quote:
Originally Posted by Skaramanga
I have a pair of brand new Look Pivot 18's (Forza) with 95mm brake width. Ended up buying a slightly wider ski than I was anticipating. Now hoping to find someone who needs a pair of 95mm brakes (brand new) and willing to part with 105's or potentially 115's. Thanks!
I'm in Bozeman... traveling to SLC next week.
Have a set of used, but good condition one-fifteens I’d trade for your set of ninety-fives. I’ll PM you.Quote:
Originally Posted by RTR;[emoji[emoji6[emoji640
I have 115 brakes and am looking for 130s. Still available?
^^^Quote:
Originally Posted by pgins;[emoji[emoji6[emoji640
Pretty sure I’ve got you covered on that trade. Send me a pm
Sent from my iPad using [emoji638]][emoji640][emoji640]][emoji640][emoji638][emoji638][emoji638]]TGR Forums
No dildos available? I’m serious. I have plenty of base plates and toes. Just short done dildos to make a complete set.Quote:
Originally Posted by Dee Hubbs
Willing to trade parts too.
Anybody know the Look part number for GW AFD's for 15/18 toes? I need 3 pair and was going to place an order but wasn't sure I was looking at the correct part.
If they are the post 2011 Looks with DIN AFD, they are the same spec/height as GW.
If you need the GW AFD, the part# is FCIF010.
See an old thread here when GW and WTR were fawking everything up:
https://www.tetongravity.com/forums/...pwalk-from-WTR
DH,
So I can get the FCFIF010 and a dremel and make them work with my old PX15 and FKS race 185 toes? Like me, a lot of my shit is pre-2011
Need one pivot 1[emoji6[emoji640]1] heel. 11[emoji6[emoji640]1] brake. Any color
Might want to check with FortySixMac. I bought some from him a few years ago and I recal he had a bunch.Quote:
Originally Posted by Lord Thomas
You are correct.Quote:
Originally Posted by Lord Thomas
Last post got emojied
Need one pivot fifteen heel piece. Cracked a dildo and broke the plastic piece. Ideally need a 115
Looking for a set of heel towers only in FKS Orange or Forza 1.0.
12, 14, or 15 DIN is fine but not 18. Cheers!
cross posting from CAST thread:
went to mount up a second ski kit and found i am missing a toe shim and set of 4 shoulder bolts. don't know how i managed this. longshot but anybody holding? pic is of exactly what i need for clarity:
Attachment 510135
I have a pair of black 14 dildos left over from the set I just got of RustyGroomerQuote:
Originally Posted by Dee Hubbs
Could you post a photo of the dildos, and let me know a price. Shipped to Avon CO. Thanks.Quote:
Originally Posted by pnwnelli
Free to a good home:
-Two sets of race brakes
-6mm riser plate and screws
I’ve got a set of pivot 12 toes available if someone wants em.
Also need some 15 or 18 dildos.
There’s a full set of cast 1.0 on eBay rn
https://www.ebay.com/itm/31602110036...mis&media=COPY
Need a pair of Pivot [emoji637][emoji6[emoji640][emoji637]]/[emoji637][emoji[emoji6[emoji640][emoji638]][emoji640][emoji640]] toes. Don’t care about color, could be mismatched frankly.
Sent from my iPhone using TGR Forums
Combatting emojis - Pivot fifteen or eighteen toes
15 or 1[emoji644]
Sent from my iPhone using TGR Forums
I have some toes. 18's I believe. Do you need the AFD pads, or would you be okay with just the metal toes?Quote:
Originally Posted by looseofforangejuice
Can make it work if I need to buy some AFDs but would prefer not to. but forgot to mention prefer WTR or GW - safe not sorryQuote:
Originally Posted by Dee Hubbs
Sent from my iPhone using TGR Forums
Might not be the correct spot but might be the best spot... Can anyone educate me on how far back is safe to adjust? Friend's son got new/larger boots which forced backing off the arms. In order to get correct forward pressure it's about one third of the way into the third knurl(sp?). Is that acceptable?
As long as there aren’t any exposed threads I’d say send it.
Gracias my friendQuote:
Originally Posted by gwat
still looking. emailed cast and no luck.Quote:
Originally Posted by stealurface831
I have a two full sets of the CAST 1.0 toe mounting screws/plates , a pair of green 18 toes with the CAST conversion but also have old regular plate w 5355 afds, and a pair of the 1.0 touring toes brand new in gold
Sent from my iPhone using TGR Forums
Also have the GW and [emoji6[emoji640][emoji637]][emoji639][emoji6[emoji640][emoji637]][emoji6[emoji640][emoji637]] afds for the CAST toes. What’s this worth / any interest ?Quote:
Originally Posted by ego[emoji[emoji6[emoji640
Sent from my iPhone using [emoji638]][emoji640][emoji640]][emoji640][emoji638][emoji638][emoji638]]TGR Forums
if you want to part with a set of the toe shims/screws/brake locks, i'm definitely interested.
How do you get replacement screws?
Also, anybody WTT my 115mm brakes for their 105mm brakes?
Send me a pair of orange FKS and I'll divulge my sekrits. :FM:Quote:
Originally Posted by Mustonen
Finding screws is a PITA--I've been able to find the toe and front (short) heel screws ok, but the 18mm pan heads for the rear heel holes are nigh impossible to find. The cast hardware pack for the 1.0 setup used to include 4 of those for the riser/brake retainer assy--same size. Now I guess you gotta make your own, or use the #2 pozidrive ones from slidewright.
Oh yeah, I stumbled on this a few weeks ago, haven't tried ordering from them:
https://uploads.tapatalk-cdn.com/202...3fe9a26dfc.jpg