Check Out Our Shop
Page 55 of 59 FirstFirst ... 50 51 52 53 54 55 56 57 58 59 LastLast
Results 1,351 to 1,375 of 1467

Thread: FS: FKS/Pivot Bindings: Used complete sets, and parts, mix-and-match

  1. #1351
    Join Date
    Feb 2015
    Posts
    435
    Looking for a single half moon… anyone holding?

  2. #1352
    Join Date
    Jan 2012
    Location
    Boulder
    Posts
    297
    Maybe a dumb question but the black piece of plastic that goes right behind the half moon broke off a pair of my pivots. Anyone have any replacements or am I having to look for a whole new heel assembly?

    If so: looking for one heel/brake assembly 115 brake size

  3. #1353
    Join Date
    Aug 2018
    Location
    beaverhead county
    Posts
    5,708
    Quote Originally Posted by Dobak View Post
    Maybe a dumb question but the black piece of plastic that goes right behind the half moon broke off a pair of my pivots. Anyone have any replacements or am I having to look for a whole new heel assembly?

    If so: looking for one heel/brake assembly 115 brake size
    got a few laying around but you'll need to take apart the heel assembly to replace it.
    swing your fucking sword.

  4. #1354
    Join Date
    Jan 2012
    Location
    Boulder
    Posts
    297
    Quote Originally Posted by stealurface831 View Post
    got a few laying around but you'll need to take apart the heel assembly to replace it.
    You have some heel plates or just the rubber black piece?

  5. #1355
    Join Date
    Aug 2018
    Location
    beaverhead county
    Posts
    5,708
    Quote Originally Posted by Dobak View Post
    You have some heel plates or just the rubber black piece?
    should have both but will you post a pic just to confirm we are on the same page?
    swing your fucking sword.

  6. #1356
    Join Date
    Mar 2011
    Location
    North,NorthEast
    Posts
    3,717

    FS: FKS/Pivot Bindings: Used complete sets, and parts, mix-and-match

    Long shot- looking to buy a pair of kiwi green pivot fourteen preferably in a ninety five width, but any width would work. Anyone holding/hoarding?

  7. #1357
    Join Date
    Jun 2005
    Location
    Driving2VT
    Posts
    4,855

    FS: FKS/Pivot Bindings: Used complete sets, and parts, mix-and-match

    Quote Originally Posted by t-the-east View Post
    Long shot- looking to buy a pair of kiwi green pivot [emoji[emoji6[emoji640][emoji638]][emoji639][emoji[emoji6[emoji640][emoji638]][emoji640][emoji639]]][emoji[emoji6[emoji640][emoji638]][emoji640][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]]]’s preferably [emoji[emoji[emoji6[emoji640][emoji638]][emoji[emoji6[emoji640][emoji638]][emoji640][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]]][emoji[emoji6[emoji640][emoji638]][emoji639][emoji[emoji6[emoji640][emoji638]][emoji640][emoji640]]]][emoji[emoji6[emoji640][emoji638]][emoji640][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]]][emoji[emoji6[emoji640][emoji638]][emoji[emoji6[emoji640][emoji638]][emoji640][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]]][emoji[emoji6[emoji640][emoji638]][emoji639][emoji[emoji6[emoji640][emoji638]][emoji640][emoji639]]]]][emoji[emoji6[emoji640][emoji638]][emoji[emoji6[emoji640][emoji638]][emoji640][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]]][emoji[emoji6[emoji640][emoji638]][emoji639][emoji[emoji6[emoji640][emoji638]][emoji640][emoji639]]]], but any width really. Anyone holding/hoarding?


    Edit to add - fucking emojis. Pivot fourteen width ninety five
    If you weren’t such an emoji jong I’d consider selling you mine. PM me
    Uno mas

  8. #1358
    Join Date
    Mar 2011
    Location
    North,NorthEast
    Posts
    3,717

    FS: FKS/Pivot Bindings: Used complete sets, and parts, mix-and-match

    Quote Originally Posted by Doremite;[emoji[emoji6[emoji640
    [emoji638]][emoji640][emoji639]][emoji637][emoji[emoji6[emoji640][emoji638]][emoji640][emoji639]][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]][emoji6[emoji640][emoji638]][emoji6[emoji640][emoji638]][emoji6[emoji640][emoji638]]]If you weren’t such an emoji jong I’d consider selling you mine. PM me
    Haha those fucking things. I went back to spell it all out [emoji51]

  9. #1359
    Join Date
    Jun 2005
    Location
    Driving2VT
    Posts
    4,855
    Don’t quote me if you are going to spread your bad emoji juju.
    Uno mas

  10. #1360
    Join Date
    Feb 2009
    Location
    Redneck Town
    Posts
    56
    ISO Raw 15s with 95mm brake

  11. #1361
    Join Date
    Dec 2007
    Posts
    358
    Anyone have spx brakes in 110 or 115?
    #parentposse

  12. #1362
    Join Date
    Aug 2012
    Location
    SLC
    Posts
    66
    Well, fantastic. I've just trashed one of my 95mm brake assemblies.

    I'm in search of 95's. I could buy a single one or I could swap your 95s for a pair of 115s I have (they are in great shape). LMK if you have anything.
    Source(s):
    Dude trust me

  13. #1363
    Join Date
    Aug 2012
    Location
    SLC
    Posts
    66
    Quote Originally Posted by eddiecut View Post
    Anyone have spx brakes in 110 or 115?
    I have a pair of 110 brakes that I would like to swap for some narrow SPX brakes (70 to 85 mil)
    Source(s):
    Dude trust me

  14. #1364
    Join Date
    Jan 2010
    Location
    In the swamp
    Posts
    12,083
    My Rossi FKS binding broke (110 brake) so I’m looking to either replace this part (see pic) or the rear part of the binding. Any help would be GREATLY appreciated
    Click image for larger version. 

Name:	Image1735056377.810275.jpg 
Views:	88 
Size:	242.7 KB 
ID:	508201
    Click image for larger version. 

Name:	Image1735056388.641810.jpg 
Views:	105 
Size:	244.6 KB 
ID:	508202

  15. #1365
    Join Date
    Nov 2020
    Posts
    296
    Quote Originally Posted by The SnowShow View Post
    My Rossi FKS binding broke (110 brake) so I’m looking to either replace this part (see pic) or the rear part of the binding. Any help would be GREATLY appreciated
    Try to warranty that. I've had a couple friends with the same thing - shouldn't happen and Look gave them replacements iirc

  16. #1366
    Join Date
    Feb 2011
    Location
    Minnesnowda
    Posts
    740
    ISO fatty breaks (130s). Have skinny 75s could trade. Open to pedestals or just breaks.


    Sent from my iPhone using Tapatalk
    "Never let the truth get in the way of a good story." Warren M

  17. #1367
    Join Date
    Sep 2019
    Location
    Bay Area
    Posts
    905
    Quote Originally Posted by t-the-east View Post
    Long shot- looking to buy a pair of kiwi green pivot fourteen preferably in a ninety five width, but any width would work. Anyone holding/hoarding?
    If you're still looking I've got a pair

  18. #1368
    RTR's Avatar
    RTR is offline Shumanitutonka Ob' Wachi
    Join Date
    Nov 2006
    Location
    With the Plebes...
    Posts
    1,190
    Quote Originally Posted by Skaramanga View Post
    Well, fantastic. I've just trashed one of my 95mm brake assemblies.

    I'm in search of 95's. I could buy a single one or I could swap your 95s for a pair of 115s I have (they are in great shape). LMK if you have anything.
    I just sent you a PM. I'm in search of 105's but 115's would probably do. I've got a brand new set of 95 brakes. Would prefer to just trade the brakes so I can keep the dildos/rest of the brake assembly to match the binding. Thanks!
    Click here to increase your vocabulary.

  19. #1369
    RTR's Avatar
    RTR is offline Shumanitutonka Ob' Wachi
    Join Date
    Nov 2006
    Location
    With the Plebes...
    Posts
    1,190
    I have a pair of brand new Look Pivot 18's (Forza) with 95mm brake width. Ended up buying a slightly wider ski than I was anticipating. Now hoping to find someone who needs a pair of 95mm brakes (brand new) and willing to part with 105's or potentially 115's. Thanks!

    I'm in Bozeman... traveling to SLC next week.
    Click here to increase your vocabulary.

  20. #1370
    Join Date
    Oct 2021
    Posts
    73

    FS: FKS/Pivot Bindings: Used complete sets, and parts, mix-and-match

    Quote Originally Posted by RTR;[emoji[emoji6[emoji640
    [emoji638]][emoji640][emoji639]][emoji637][emoji[emoji6[emoji640][emoji638]][emoji640][emoji639]][emoji[emoji6[emoji640][emoji638]][emoji640][emoji640]][emoji639][emoji640][emoji[emoji6[emoji640][emoji638]][emoji640][emoji639]]]I have a pair of brand new Look Pivot [emoji637][emoji[emoji6[emoji640][emoji638]][emoji640][emoji640]]'s (Forza) with [emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji637]]][emoji6[emoji640][emoji637]]mm brake width. Ended up buying a slightly wider ski than I was anticipating. Now hoping to find someone who needs a pair of [emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji637]]][emoji6[emoji640][emoji637]]mm brakes (brand new) and willing to part with [emoji637][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]][emoji6[emoji640][emoji637]]'s or potentially [emoji637][emoji637][emoji6[emoji640][emoji637]]'s. Thanks!

    I'm in Bozeman... traveling to SLC next week.
    Have a set of used, but good condition one-fifteens I’d trade for your set of ninety-fives. I’ll PM you.

  21. #1371
    Join Date
    Mar 2009
    Posts
    18
    I have 115 brakes and am looking for 130s. Still available?

  22. #1372
    Join Date
    Jan 2011
    Location
    Alta
    Posts
    3,341

    FS: FKS/Pivot Bindings: Used complete sets, and parts, mix-and-match

    Quote Originally Posted by pgins;[emoji[emoji6[emoji640
    [emoji638]][emoji640][emoji639]][emoji637][emoji[emoji6[emoji640][emoji638]][emoji640][emoji639]][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji637]]][emoji[emoji6[emoji640][emoji638]][emoji640][emoji640]][emoji638][emoji6[emoji640][emoji638]]]I have [emoji637][emoji637][emoji6[emoji640][emoji637]] brakes and am looking for [emoji637][emoji639][emoji[emoji6[emoji640][emoji638]][emoji640][emoji6[emoji640][emoji638]]]s. Still available?
    ^^^

    Pretty sure I’ve got you covered on that trade. Send me a pm


    Sent from my iPad using [emoji638]][emoji640][emoji640]][emoji640][emoji638][emoji638][emoji638]]TGR Forums

  23. #1373
    Join Date
    Jan 2008
    Location
    BC to CO
    Posts
    5,116
    Quote Originally Posted by Dee Hubbs View Post
    I need 2 black dildos. I don't care what size, 18s, 15s, 14s, even 12s.
    I don't need any other accessories, just the dildos, prefer black, but will take anything dark and close.
    Thanks.
    No dildos available? I’m serious. I have plenty of base plates and toes. Just short done dildos to make a complete set.
    Willing to trade parts too.
    Last edited by Dee Hubbs; 01-06-2025 at 07:42 PM.

  24. #1374
    Join Date
    Jan 2011
    Location
    Winthrop, WA.
    Posts
    1,757
    Anybody know the Look part number for GW AFD's for 15/18 toes? I need 3 pair and was going to place an order but wasn't sure I was looking at the correct part.

  25. #1375
    Join Date
    Jan 2008
    Location
    BC to CO
    Posts
    5,116
    If they are the post 2011 Looks with DIN AFD, they are the same spec/height as GW.
    If you need the GW AFD, the part# is FCIF010.
    See an old thread here when GW and WTR were fawking everything up:
    https://www.tetongravity.com/forums/...pwalk-from-WTR

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •