Printable View
16" to 20", cheap, thats about it really.
I have a bunch of parts around and want to build up another SS for a friend, Have wheels, cranks/BB, brakes, etc. Just need a frame/fork/headset.
I can buy the bits that the bike doesn't have
Free is good but I will buy it too or trade for shit I have, but as this is a parts project cheap is good, Old school is just fine (better?) just no walmart frames please ....
lemme check around my shop... may have something
Soul Cycles is blowing out there SS frames.
$200 Frame and fork.
ridesoul.com
andy: I can't find info on the SS on the website?
the hooligan.
vert dropouts = ebb
don't know anything else about it.
http://forums.mtbr.com/showthread.ph...ycles+hooligan
What info are you looking for?Quote:
Originally Posted by mntlion
I'd like to see a photo of the bike.
Mine:
http://www.singlelensreflex.net/gall...-1/Friday7.jpg
I'll have to dig around to find a frame only pic.
edit found one.
Random Frame.
http://www.singlelensreflex.net/gall...ligan1+048.jpg
I've got a friend that has a Bianchi DISS frame 19.5 in c to t I believe, I'll have to check though. Disc only $50 + ship
Size (Measured From Center Of Bottom Bracket To Top Of Seat Tube)
17"//19"
Recommended Fork Length
100mm//100mm
Head Angle
71//71
Headset
1 1/8//1 1/8
Seat Angle
73//72
Seatpost Size
27.2mm//27.2mm
Top Tube Length Measured Center To Center
21.7"//22.7"
Wheelbase
1071mm//1083mm
Chainstay Length
435mm//435mm
Bottom Bracket Width
68mm//68mm
Bottom Bracket Height
11.5"//11.5"
Disc Brake Mount Spacing
51mm//51mm
Rear Axle Spacing
135mm//135mm
Rear Axle Diameter
10mm/10mm
Maximum Tire Clearance
2.5"+//2.5"+
Standover At Midsection Of Top Tube And Forward Of Seat Tube
28.5" 27"//31" 28"
powderw and marsh, can you let me know?
If your going to run disc brakes on the DISS, the rear break attachment is suck. You have to loosen the brake up to remove your wheel and then re-adjust/tighten it when the wheel goes back in.
It is at home, I'll be able to let you know more on Friday.
Quote:
Originally Posted by powwrangler
any news?
what about you marsh? find anything?
19.5 c - t I'll try to get a picture up of it tomorrow, steel, primer grey, missing some, paint disc only, dent in the top tube, not too big though. Disc brake adjustment via slotted mounts rather than an eccentric. Some like the disc setup some don't.
anything?Quote:
Originally Posted by marshalolson