Check Out Our Shop
Page 14 of 15 FirstFirst ... 9 10 11 12 13 14 15 LastLast
Results 326 to 350 of 354

Thread: Hot tubs. A discussion.

  1. #326
    Join Date
    May 2009
    Location
    inpdx
    Posts
    21,205

    Hot tubs. A discussion.

    Quote Originally Posted by tgapp View Post
    I've got one and can answer any questions you might have about it
    I guess my first would be: what kind do you have?

    Then: would you do the same again now that you’ve used it for a bit?

  2. #327
    Join Date
    Mar 2017
    Location
    SLC, Utah
    Posts
    4,743
    Quote Originally Posted by ::: ::: View Post
    I guess my first would be: what kind do you have?

    Then: would you do the same again now that you’ve used it for a bit?
    I've got a setup that I picked up used - I got it for cheap, which is its best virtue. What I love about it is everything is modular, and it'll last a few lifetimes.

    Barrel: Ice Barrel 400. I love how big it is, I hate that it's not insulated. I added 5mm close cell foam and a barrel wrap to it, and it easily holds at 45 degrees. If I could do it again I would strongly consider an insulated barrel. I would NEVER pay full price for one of these, but I think they are far better than the cheapo low volume plunges. It's really, really nice to be able to fully submerge.
    Chiller: Vevor 1/3hp. It's slightly under gunned, but not bad. I would probably upgrade to a 1/2hp chiller of this kicks the can. Vevor is a great budget brand, if I built another I would use Vevor for sure.
    Filtration/water treatment: in line filter + ozone generator on a 30 minute timer + Ice Barrel stabilizer. Love the ozone, I got mine from Box Plunge and it works awesome.

    All of that is hooked up to an InkBird thermostat which does a great job. Overall - I would do the same thing, which is to say, obsessively check Facebook classifieds until I found a used setup that checked as many of my boxes as possible. If not that, I would start with a Vevor (1/3 or 1/2 HP depending on where you plan on having it and how cold you want it), add in ozone, etc, and find a big enough thing to plunge in (lots of decent options). I hear that the converted freezer models often fail after a few years, and they are hard to drain/clean.





    Sent from my Pixel 8 Pro using Tapatalk

  3. #328
    Join Date
    May 2009
    Location
    inpdx
    Posts
    21,205
    Do you have it indoors or out?
    How frequently do you use it?

    I don’t live in a place that expects below freezing temps (350’ el) very often. I’d very much like to keep it outside

    I like the Nordic Wave Viking just from browsing online, but not sure on buying new

  4. #329
    Join Date
    Feb 2017
    Location
    truckee
    Posts
    2,666
    Upstate hot tub ftw

    Name:  84428584.jpg
Views: 370
Size:  42.4 KB

  5. #330
    Join Date
    Mar 2017
    Location
    SLC, Utah
    Posts
    4,743
    Quote Originally Posted by ::: ::: View Post
    Do you have it indoors or out?
    How frequently do you use it?

    I don’t live in a place that expects below freezing temps (350’ el) very often. I’d very much like to keep it outside

    I like the Nordic Wave Viking just from browsing online, but not sure on buying new
    Indoors, in our sauna room. I use it daily. The viking is pretty much identical in functionality to what I have (with a stronger chiller) at 6x the price. Granted it looks a lot nicer and is new, but yeah, that's a nice setup.

    Sent from my Pixel 8 Pro using Tapatalk

  6. #331
    Join Date
    May 2009
    Location
    inpdx
    Posts
    21,205

    Hot tubs. A discussion.

    That’s what I want to do: pair it with sauna

    I’ve had some significant muscle imbalance stuff and a daily hot/cold seems like it could be awesome
    Shower isn’t cutting it

  7. #332
    Join Date
    Oct 2003
    Location
    Ogden
    Posts
    9,824
    Quote Originally Posted by tgapp View Post
    Indoors, in our sauna room. I use it daily. The viking is pretty much identical in functionality to what I have (with a stronger chiller) at 6x the price. Granted it looks a lot nicer and is new, but yeah, that's a nice setup.

    Sent from my Pixel 8 Pro using Tapatalk
    I might have to hit you up for advice. Wife is all in on sauna and cold plunge after yesterday.

  8. #333
    Join Date
    Mar 2017
    Location
    SLC, Utah
    Posts
    4,743
    Quote Originally Posted by zion zig zag View Post
    I might have to hit you up for advice. Wife is all in on sauna and cold plunge after yesterday.
    Yeah, I have much stronger opinions on sauna than I do cold plunge, mostly because so much of what is sold as sauna in the United States is complete and total garbage. People conflate getting really hot with good sauna, and the two are NOT the same thing

    Sent from my Pixel 8 Pro using Tapatalk

  9. #334
    Join Date
    Dec 2016
    Location
    In a van... down by the river
    Posts
    15,268
    Quote Originally Posted by tgapp View Post
    Yeah, I have much stronger opinions on sauna than I do cold plunge, mostly because so much of what is sold as sauna in the United States is complete and total garbage. People conflate getting really hot with good sauna, and the two are NOT the same thing

    Sent from my Pixel 8 Pro using Tapatalk
    Are you Finnish by chance?

  10. #335
    Join Date
    Oct 2007
    Posts
    13,582
    Did some laps on cold plung, sauna, and lobster pot yesterday at the hot springs. Really want that setup at home so I dont have to deal with all the people.

    Is there a way to add lithium to your hot tub?

  11. #336
    Join Date
    May 2009
    Location
    inpdx
    Posts
    21,205
    Quote Originally Posted by tgapp View Post
    Yeah, I have much stronger opinions on sauna than I do cold plunge, mostly because so much of what is sold as sauna in the United States is complete and total garbage. People conflate getting really hot with good sauna, and the two are NOT the same thing
    We’ve always spec’ed Finlandia kits for clients here
    I didn’t realize until recently that they are situated in our backyard (just outside Portland)

  12. #337
    Join Date
    Mar 2017
    Location
    SLC, Utah
    Posts
    4,743
    Quote Originally Posted by ::: ::: View Post
    We’ve always spec’ed Finlandia kits for clients here
    I didn’t realize until recently that they are situated in our backyard (just outside Portland)
    Finlandia has some great kits and some mediocre kits. They and Cedarbrook (which we have) are on the high end of kit saunas, which is a bit like being on the high end of prefab homes.

    Biggest issue with US saunas is that you can't escape the laws of thermodynamics. Ventilation and (limiting) heat stratification are at the very core of what differentiates a pleasant, refreshing sauna experience from a suffocating/dizzying sauna. Both of these are largely a function of sauna height and sauna volume. Far too many US saunas leave you with cold feet and a dizzy head. While there are some clever things you can do to overcome physical limitations - like mechanical venting designed with convective heat currents in mind or using tower-style heaters - ultimately a sauna needs to be bigger than what most kit saunas are in the US. Ours is 5'x6'x7' (interior), insulated, with a tower heater and a very smart vent design, and it is the absolute smallest sauna I would ever consider. By American kit sauna standards, it's a large/6 person sauna.

    Sent from my Pixel 8 Pro using Tapatalk

  13. #338
    Join Date
    May 2009
    Location
    inpdx
    Posts
    21,205
    Quote Originally Posted by tgapp View Post
    Finlandia has some great kits and some mediocre kits. They and Cedarbrook (which we have) are on the high end of kit saunas, which is a bit like being on the high end of prefab homes.

    Biggest issue with US saunas is that you can't escape the laws of thermodynamics. Ventilation and (limiting) heat stratification are at the very core of what differentiates a pleasant, refreshing sauna experience from a suffocating/dizzying sauna. Both of these are largely a function of sauna height and sauna volume. Far too many US saunas leave you with cold feet and a dizzy head. While there are some clever things you can do to overcome physical limitations - like mechanical venting designed with convective heat currents in mind or using tower-style heaters - ultimately a sauna needs to be bigger than what most kit saunas are in the US. Ours is 5'x6'x7' (interior), insulated, with a tower heater and a very smart vent design, and it is the absolute smallest sauna I would ever consider. By American kit sauna standards, it's a large/6 person sauna.

    Sent from my Pixel 8 Pro using Tapatalk
    for me, i like to stretch out & at 6-5, that requires a certain interior
    mrs ::: ::: never does top bench so i can either sit up or lie down up there

    As an arch, I'm still trying to figure out the thermodynamics of these since all the building science envelope research is focused on conventional conditioned living spaces. Finlandia is recommending the old school wall partition makeup that they've been doing since they opened in 1964 (2x4's w/ fiber insul). When you're burning watts on resistance heating, does it make sense to insulate the enclosure such that maybe the heater doesn't cycle as much? Still searching out those answers properly...I wonder what modern scandi archs are building locally.

  14. #339
    Join Date
    Oct 2011
    Posts
    1,464
    Quote Originally Posted by nickwm21 View Post
    You’re in the Seattle area right?

    We bought a Viking from Decks and Spas in Redmond. Vikings are no frills; plastic (not fiberglass and wood), but with quality Balboa internals. It’s a “6 seater” (real life 4 seater) with upgraded insulation and top. It was $5300 in 2020. Check them out.

    There was another shop in the puget sound that specialized in rebuilding and selling used spas. They had all the high end stuff in really good condition. I don’t remember the name but we almost bought there….


    Sent from my iPhone using TGR Forums
    Very interesting. If the name comes to mind lemme know that seems like a great angle

    Sent from my Pixel 5 using Tapatalk

  15. #340
    Join Date
    Mar 2017
    Location
    SLC, Utah
    Posts
    4,743
    Quote Originally Posted by ::: ::: View Post
    for me, i like to stretch out & at 6-5, that requires a certain interior
    mrs ::: ::: never does top bench so i can either sit up or lie down up there

    As an arch, I'm still trying to figure out the thermodynamics of these since all the building science envelope research is focused on conventional conditioned living spaces. Finlandia is recommending the old school wall partition makeup that they've been doing since they opened in 1964 (2x4's w/ fiber insul). When you're burning watts on resistance heating, does it make sense to insulate the enclosure such that maybe the heater doesn't cycle as much? Still searching out those answers properly...I wonder what modern scandi archs are building locally.
    https://localmile.org/trumpkins-note...lding-a-sauna/

    That's a great resource if you haven't seen it already. IMO where you place the thermostat, how you insulate, and making sure you have an appropriately sized heater all influence how often the heater cycles. Our preference is to get the sauna as hot as we want it (usually 210), and then just allow it to gradually cool off through our 2-3 cycles, ending around 175-180. I hate when the heater trips on.

    https://www.saunatimes.com/building-...as-an-opinion/

    This is also a great resource. When designing and researching our sauna, I found a really great PDF that had a lot of FLIR images of saunas. We have one vent underneath the main bench and one vent above the heater and another vent in the corner of the sauna, but we always leave that one closed.

    Sent from my Pixel 8 Pro using Tapatalk

  16. #341
    Join Date
    May 2009
    Location
    inpdx
    Posts
    21,205
    Quote Originally Posted by tgapp View Post
    https://localmile.org/trumpkins-note...lding-a-sauna/

    That's a great resource if you haven't seen it already. IMO where you place the thermostat, how you insulate, and making sure you have an appropriately sized heater all influence how often the heater cycles. Our preference is to get the sauna as hot as we want it (usually 210), and then just allow it to gradually cool off through our 2-3 cycles, ending around 175-180. I hate when the heater trips on.

    https://www.saunatimes.com/building-...as-an-opinion/

    This is also a great resource. When designing and researching our sauna, I found a really great PDF that had a lot of FLIR images of saunas. We have one vent underneath the main bench and one vent above the heater and another vent in the corner of the sauna, but we always leave that one closed.

    Sent from my Pixel 8 Pro using Tapatalk
    thx for those -- will read

    [eta]just skimming...holy shit, that first one is pretty thorough -- good stuff!

  17. #342
    Join Date
    Sep 2001
    Location
    Orangina
    Posts
    9,653
    Happy to join this thread as we just took delivery of a Bullfrog. I've always been a bit grossed out by hot tubs but getting old with weird aches and pains and never ending soreness from working out trying to avoid said aches and pains makes it quite attractive.

    She's heating up as I type and I'm looking forward to an inaugural soak tomorrow after the gym!
    "All God does is watch us and kill us when we get boring. We must never, ever be boring."

  18. #343
    Join Date
    Oct 2007
    Posts
    13,582
    Quote Originally Posted by The Reverend Floater View Post
    Happy to join this thread as we just took delivery of a Bullfrog. I've always been a bit grossed out by hot tubs but getting old with weird aches and pains and never ending soreness from working out trying to avoid said aches and pains makes it quite attractive.

    She's heating up as I type and I'm looking forward to an inaugural soak tomorrow after the gym!
    name checks out...

  19. #344
    Join Date
    Sep 2001
    Location
    Orangina
    Posts
    9,653
    Quote Originally Posted by Name Redacted View Post
    name checks out...
    God damn. Well done.
    "All God does is watch us and kill us when we get boring. We must never, ever be boring."

  20. #345
    Join Date
    Oct 2003
    Location
    Sandy
    Posts
    15,097
    Quote Originally Posted by The Reverend Floater View Post
    Happy to join this thread as we just took delivery of a Bullfrog. I've always been a bit grossed out by hot tubs but getting old with weird aches and pains and never ending soreness from working out trying to avoid said aches and pains makes it quite attractive.

    She's heating up as I type and I'm looking forward to an inaugural soak tomorrow after the gym!
    I’m right there too and starting to look finally. Enjoy.

  21. #346
    Join Date
    Sep 2001
    Location
    Babylon
    Posts
    13,832
    Quote Originally Posted by The Reverend Floater View Post
    Happy to join this thread as we just took delivery of a Bullfrog. I've always been a bit grossed out by hot tubs but getting old with weird aches and pains and never ending soreness from working out trying to avoid said aches and pains makes it quite attractive.

    She's heating up as I type and I'm looking forward to an inaugural soak tomorrow after the gym!
    Word, Hot tub you maintain yourself avoids the ick.
    I wont go into most tubs, as I have worked at high end resorts and seen how off those readings can get with $ equipment and good/plentiful staff. PLus I have seen the feed/ footage from resort tubs and know what happens in there.

    Hampton Inn Nowhere tub? no thanks

  22. #347
    Join Date
    Nov 2003
    Location
    none
    Posts
    8,883
    Quote Originally Posted by Shredhead View Post
    I love mine and am in it everyday, sometimes 2 or 3. It’s often the only pain free time I have in a day.


    Salt water tubs still use Chlorine as a sanitizer, it’s just derived thru electrolysis.

    All these systems are just manufacturers way of keeping you buying their proprietary chemicals or chlorine generators.

    Nothing will be cheaper than using this method.

    https://www.poolspaforum.com/forum/i...er-maintaince/
    My total chemical expenditure is < $100/year, using Nitro's approach.

    Use Ahhsome once or twice a year
    to clean your pipes. It makes cleaning your tub a little more involved, because you won't believe
    how much shit comes out of the pipes.
    https://ahhsome.com/

  23. #348
    Join Date
    Dec 2010
    Location
    Last Best City in the Last Best Place
    Posts
    8,195
    Quote Originally Posted by The Reverend Floater View Post
    Happy to join this thread as we just took delivery of a Bullfrog. I've always been a bit grossed out by hot tubs but getting old with weird aches and pains and never ending soreness from working out trying to avoid said aches and pains makes it quite attractive.

    She's heating up as I type and I'm looking forward to an inaugural soak tomorrow after the gym!
    Mind sharing what model? Did you get it through Costco?

  24. #349
    Join Date
    Sep 2010
    Location
    Tejas
    Posts
    12,552
    Quote Originally Posted by The Reverend Floater View Post
    I've always been a bit grossed out by hot tubs but getting old with weird aches and pains and never ending soreness from working out trying to avoid said aches and pains makes it quite attractive.
    Quote Originally Posted by Woodsy View Post
    Word, Hot tub you maintain yourself avoids the ick.
    Bingo. Our hot tubs were cleeeeeean. Never an issue. Regular drain/refills, keeping the chemistry dialed, and above all, cleanliness BEFORE getting in goes a long way. After a long day of skiing, we'd always make our guests shower off before getting to use our tub. When it was just ourselves tho, no swimsuits. Don't want remnants of detergents getting in there when you can help it. Clouds up the water. Really does make a difference to keep everything crystal clear and clean. By doing all these things, every time I rinsed out the filters during my drain and fills, they looked good as new and they would last FOREVER.

    Public hot tubs are naaaasty tho. People's kids always party in them with their little arm floaties, acting like its the main pool.

  25. #350
    Join Date
    Jan 2008
    Location
    livin the dream
    Posts
    6,400
    I’m deep into a war with ants on the tub… need advice.

    We normally get a small infestation on one side of the tub in the shoulder seasons. A single terro bait does the trick.

    This year - entire rim, under the cover - massive infestation with eggs…. I turned it off drained it and thoroughly cleaned, put a terro bait on all 4 corners and inside the cabinet. Sprayed a perimeter product on the base and walls. That was two weeks ago. They are just laughing at me. Still fucked. They are tiny normal garden ants (not carpenters).


    Sent from my iPhone using TGR Forums
    Best Skier on the Mountain
    Self-Certified
    1992 - 2012
    Squaw Valley, USA

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •