Need: P12 regular length screws

**skibum193** · 09-13-2007, 12:48 PM

I bought some P12 lifters and want to mount them without the lifters. If anyone has a set of regular length P12 screws they wouldn't mind passing off I can send a few bucks/pay for shipping. Let me know!

**memosteve** · 09-13-2007, 01:36 PM

Just grind them down.

**skibum193** · 09-13-2007, 01:39 PM

Some of the ones I have are stripped because the guy sucked at taking bindings off. And grinding is a pain in the ass...

**cooltsi** · 09-13-2007, 01:45 PM

Which lifter are you using and which did you come from? If they are the lifter binding than your kinda stuck unless you don't mind the change in ramp angle. Do yours have the bridge in between? I'd like the screws for the longers and could swap you for short ones if yours are still usable.

**skibum193** · 09-13-2007, 01:55 PM

Originally Posted by cooltsi

Which lifter are you using and which did you come from? If they are the lifter binding than your kinda stuck unless you don't mind the change in ramp angle. Do yours have the bridge in between? I'd like the screws for the longers and could swap you for short ones if yours are still usable.

Mine don't have the bridge. They are regular P12's that came with the plastic lifter plates (seperate for toepiece and heelpiece). I would love to swap if you have the regular screws. All of mine are in good shape except one screw is totally stripped

**cooltsi** · 09-13-2007, 02:25 PM

Unfortunately I need the longer ones with the bridge, like this:

This is the standard lifter and approximately 4mm lower than the one above

I have some P14 race that have virtually no lifter but the current lifter won't fit on the toe as I found out. These are about 4mm lower than the ones above.

Any reason your taking off the lifter? There's not that much standheight on any of these bindings.

**skibum193** · 09-13-2007, 03:15 PM

Mine are the second ones, and I'm just not a fan of lifted bindings. And it's more plastic to break, so I don't really see the point... Thanks for checking though. Anyone else?

**cooltsi** · 09-13-2007, 03:18 PM

Make sure your ditching both the toe and heel plates, still not sure what that will do to your ramp angle but it could change it. Good luck with your search.

**skibum193** · 09-13-2007, 03:28 PM

Originally Posted by cooltsi

Make sure your ditching both the toe and heel plates, still not sure what that will do to your ramp angle but it could change it. Good luck with your search.

I've actually done it before and no problems, thanks though