FS: Skis PE + sploders, and mtn bikes, road frame

[jibco]

Need to fund a racing kart. Pick up or meet in the Denver area. I'd rather not ship the bikes, but we can do that. Any questions just fire away.

04/05 maroon buhda explosiv, 180 cm. 3 mounts. Current is solly 315mm on the line. Old mounts are hammerheads and R8s (the 4 hole std). Low milage ski for 3 mounts, edges and base are in real good shape. I don't think there are any repairs, just some scuffs on tops and bottoms. 1 little area of topsheet peel, <1 in^2. Some discussion on these are in an older FS thread of mine. $200 shipped

Mismatched 04 (buhda like) and 05 (has channel) CMH explosiv 180 cm. 2 mounts. Original solly demo and dynafit at 305mm Juuust in front of the line. I figure this will safely fit in the ballpark of 300 to 318mm AT boots. They are in better shape than when I got them, I put a few light days on them. $180 shipped

Also, some 178 dynastar Agyl sup's (blue w/ green). Mounted with marker 8.1s for 305mm at the line. they also have holes for hammerheads and look p12s at 314ish. low milage, good carver for visitors or whatever. $50 shipped

Beater mtn bike: 19" cannondale killer V 900. Modest used parts. Good for beginer or to beat around town. $175

17" Schwinn homegrown (I think 2000 or 99) bassboat green. I'm not sure if it is the last yeti frame or not. It is frame only now. Some parts are available for cheap --- Avid arch rivals, and levers, black 26.8mm Thompson post, varity of V brake wheels. $200 for frame/post and we can discuss other parts.

Updated 8/17

[jepilot]

First, could the maroon sploders take another set of holes for a 345mm bsl? and secondly, how insane is it to ship a 19" bike?

[jibco]

Maybe, If you wanted to use the current solly toes, you'd end up mounted a bit back. Probably not what you want. I'll look at them later. What binding are you thinking about using?

That is probably in the $50 ballpark.

[jepilot]

probably rossi 120 pro

EDIT: I'm going to think about the killer v...when I got my first real mtb (15" Giant Acapulco) they had a few of those in the shop. I'm starting to remember that I was obsessed with it when I was 10.

[brice618]

do you have any interest in selling the px12ti's by themselves?

[dfinn]

is that the correct price on that road frame/fork? $50?

[SkiEvil]

PM Sent re:road frame

[jibco]

do you have any interest in selling the px12ti's by themselves?

Not really. I could if just the skis went. But it looks like someone wants the whole setup.

[jibco]

is that the correct price on that road frame/fork? $50?

Yeah, I got a killer deal on the whole bike years ago, so I'm passing it on. I'm not sure I'd ask any more than that anyway.

Ha. I was looking for a picture of the frame, and found this. Mine has the lettering in yellow, not pink, so maybe it's a different year.
http://www.pedalpushersonline.com/?CID=651

Buy my stuff, I need a shifter kart!

[pechelman]

that picture now makes me consider that road frame as well to build it up as a single
guess i didnt read the whole carbon\lugged thing

[Magnoe]

Did you sell the PE setup yet?

[mitch buchannon]

Where is there shifter kart racing around here?

My inner redneck has been lusty for a shifter kart for a few years.

[jibco]

Did you sell the PE setup yet?

Glade Mover is 1st in line. Looks like he will get them. I will fetch them from Frisco on Saturday and ship out shortly after.

Mitch. There are three main venues around the area. IMI is a track in Erie, Action karting at Bandimere, and The Track at centinial (badass). www.thetrack.us

[cinnepa]

how insane is it to ship a 19" bike?

just cost me $100 to send my 21" trek by ups, from pennsylvania to oklahoma

[jepilot]

just cost me $100 to send my 21" trek by ups, from pennsylvania to oklahoma

yeah, I calculated that it would be about that much. Thanks for the heads up

[mitch buchannon]

Mitch. There are three main venues around the area. IMI is a track in Erie, Action karting at Bandimere, and The Track at centinial (badass). www.thetrack.us

Holy shit. The Track is a pretty badass facility. I've been around that area before and never seen it. Is there a decent used kart market around Denver?

[jibco]

Dang, $100? That is fucked up.

Looks like pechelman will get the frame so I can avoid shipping. Sorry, SkiEvil.

Mitch, basically craigslist, and www.thecoloradokarter.com (looks broke right now) are the main outlets. The CSC (CO sprint championship) events may be a good time to check out the scene and find rigs for sale in person.

[J-Mo]

pecheman, buying more shit? you're worse than me

jibco, nice, didn't know you decided to do this for sure. shifter will be cheaper than an equivalently fun (possible?) sports car.

[jibco]

Roadie gone. PEs and Homegrown should have a home soon.

Beater bike and explosivs are still for sale.

[jibco]

Beater bike and explosivs are still for sale.

Please make offers if anyone is interested.

[jepilot]

what kind of shifter on that killerV?

[jibco]

what kind of shifter on that killerV?

Grip shift. Not sure of the model, it is one of the nicer older ones for sure. I can check later if you want the specifics.

[jepilot]

Grip shift. Not sure of the model, it is one of the nicer older ones for sure. I can check later if you want the specifics.

n/m. Thanks though...looking for rapid fire

[jibco]

3 pairs of skis and 2 bikes available. Original post updated with prices and whatnot.