O.G. Big Daddy question

[teleposeur]

I was wondering,
can one mount say hammerheads on the original big daddies after removing the atomic plate,
or would you need a riser?
I'm pretty sure like a cobra or g3 would fly, but hhs are a lil wierd, thanks.

[hemas]

Does the heel pice have center-line screws for mounting?

And how wide is the base of HH.

Then you can search for the specs of teh groove from that older thread and see if they fit between the beta-ribs (and the screws don't go too close the the central groove).

My short uneducated guess is, no-go sans an adaptor-plate.

[grooveninja]

No to the HH's - The top plate is to wide to fit in the channel, you will need a riser mount them flush with the top of the channel.

Pretty sure the G3's (which i can't see lasting to long on BD's anyway) didn't fit either. Don't hold me to that as the G3's didn't even get a consideration since they break so much on small light weight skis.

I went with R8's because the metal bracket fits perfectly in the track as well as the risers, plus its a way more burly binding.