Question about mounting Dawn Patrols w/freerides

[dk_alaskan]

Has anyone on here tried to mount Dawn Patrols w/freerides? I am trying to help a friend get a pair of 175 Dawn Patrols mounted with a set of small Freeride+'s. The boot soles are 285mm. The tech here in town doesn't really know if this can be done because of the pre drilled tele holes. Can anyone help with this ?

[mntlion]

should be fine, but watch the diamer heel holes. The ski will be very thin at that point...

[dk_alaskan]

so just mount off of either of the two sets of holes for the front of the bindings and jig the rear holes?

[mntlion]

no ski center or toe mark on the skis?

if not measure / compare to what ever K2 alpine ski is the same as it, and use that mark. but once you find that mark, just jig and drill.

[elchupanebre4]

Don't know how much this helps, but I have a pair of Hippy's with small freerides. The small freeride can be mounted around the holes on that ski, not sure where it was mounted, but since the inserts should be spaced the same I'm guessing you should be able to clear the holes but not certain as to whether you'll be able to score the desired binding position.