Wanted to double check this:
Can I turn some unsused DIN-10 977s into DIN 12 or 14 977s by just dropping in a beefier spring from some trashed 957/977/997 bindings? The heelpiece springs are shorter than 997 springs, but the toe springs look the same. Is everything else the identical on the bindings?
Results 1 to 4 of 4
Thread: Paging salomon binding experts
-
05-09-2006, 11:55 PM #1
knob turner
- Join Date
- Dec 2005
- Location
- in the dark
- Posts
- 2,198
Paging salomon binding experts
Last edited by davep; 05-10-2006 at 12:34 AM.
-
05-10-2006, 09:05 AM #2
bikepathlete
- Join Date
- Oct 2004
- Location
- retired
- Posts
- 12,456
not recommended. the 10 din used alot more plastic.
-
05-10-2006, 12:19 PM #3
knob turner
- Join Date
- Dec 2005
- Location
- in the dark
- Posts
- 2,198
Even compared to the 12 din? The housing of din 10 and 12 both look entirely plastic to me, I can only see a difference with the metal din 14s. Is there more plastic hidden inside the din 10 somewhere?
Originally Posted by marshalolson
-
05-10-2006, 04:51 PM #4
bikepathlete
- Join Date
- Oct 2004
- Location
- retired
- Posts
- 12,456
plastic moving parts inside the binding.
Reply With Quote
Bookmarks