stem searching

**cinnepa** · 05-04-2006, 08:45 AM

here's what i need, oversize 31.8, 30 degree (or more), 120mm or so length. god knows i tried every site i could find, any help would be mucho appreciated.

**pechelman** · 05-04-2006, 08:56 AM

this for road or mtn?
if for mtn, could you get by with a shorter ~90mm @ 30* with a riser bar?

edit: nm on that link, it was for a 25.4. I did find a 70mm 25* hope though on jensonusa.com

**cinnepa** · 05-04-2006, 09:01 AM

thanks but need a 31.8 diameter clamp, that is a 25.4...for the mountain bike by the way.

**cinnepa** · 05-04-2006, 09:03 AM

my trusted site is bikeparts.com, they even couldn't come thru....tried jenson, and many others............last resort would probably be one of those threadless stem riser things

**pechelman** · 05-04-2006, 09:13 AM

theres a 120mm 25degree stem on ebay right now
it doesnt say what bar size its for though.
its cheap enough though you could just buy a new bar.

**CantDog** · 05-04-2006, 09:54 AM

You could go custom stem too.

**mntlion** · 05-04-2006, 10:04 AM

slide you set back on the rails a bit too?

not the same, but might help for a bit...

**cinnepa** · 05-04-2006, 10:54 AM

did or done much of the suggestions, i have a 30 degree stem (25.4), and a 2-1/2"' rise bar........just doesn't have the same ride feel as the oversize 3" rise bar and 31.8 bontager 17 degree stem i'm using now. funny, front end height is about equal going with each of above combinations (standard vs. oversize).