I'm trying to expand the boots sole length of 6:14s (on 03/04 BD's with riser plate) from ~310 to 335mm. I've removed the orange AFD plate and slid the toe and heel piece apart to the 330mm setting, then I re-attaching the AFD plate. It fits my boot now, however the heel piece hangs out over the back of its rail by about 3 cm. I'd like to remount the binding a little wider, on the riser plate, to eliminate this overhang.
My question is do I need a jig, or other special equipment, to remount the binding to the riser plate? Does the riser plate have pre-set holes for a wider mounting?
Thanks & JONG away
Results 1 to 3 of 3
Thread: Another BD Question
-
03-13-2006, 03:59 PM #1
Mr. Mad Gaper Steeze
- Join Date
- Mar 2004
- Location
- The Micky D's in Idaho Springs
- Posts
- 1,896
Another BD Question
-
03-13-2006, 05:32 PM #2
one-track mind
- Join Date
- Jul 2004
- Location
- Truckee
- Posts
- 2,327
Never took mine apart, but I just saw a photo of the standard plate on ebay. Looks like easy pre-set holes for 3 different toe positions, and 3 different heel positions.
Originally Posted by This End Up
I say take a screwdriver (posi might be best), open it up, and go for it. But don't sue me if you have troubles---I never tried it myself.
.
.- TRADE your heavy PROTESTS for my lightweight version at this thread
"My biggest goal in life has always been to pursue passion and to make dreams a reality. I love my daughter, but if I had to quit my passions for her, then I would be setting the wrong example for her, and I would not be myself anymore. " -Shane
"I'm gonna go SO OFF that NO ONE's ever gonna see what I'm gonna do!" -Saucerboy
-
03-13-2006, 10:22 PM #3
Mr. Mad Gaper Steeze
- Join Date
- Mar 2004
- Location
- The Micky D's in Idaho Springs
- Posts
- 1,896
Thanks, that was easy.
Reply With Quote
Bookmarks