Sold the slalom skis these were on, and with two sets of Pivots and an upper end Tyrolia still sitting in the closet I can't justify keeping them around, besides I'm missing a spot in the quiver for a twin tip.
Currently on a 183 Scott Santiago mission, Big Daddy, 180 Tanker and some Kahving skis. I'd like to fill the gap in between, Something midfat to Fat twin in a 173-183 is what I'm thinking.
Partial trade of course, as I have a bit of cash to make up the difference. Like to keep it under $150 cash.
I'd like $100 for the bindings plus $7.70 shipping. I've touched up some of the chips etc...on the bindings with a Testers paint marker (works great on bindings on topsheets by the way). Other than normal usage for 30 days (estimate), there is one issue, the plastic C plate at the heel of the bottom that pushes the red tension indicator is a bit loose. It like to not push the tension adjustement. There are three plastic buttons that hold the plate on and there is some play in them. This is only on one heel, and the last time I checked it I held the C piece firm while I clipped the boot in. Hopefully this makes sense as I did not take pictures of them when I listed the skis (forgot about the issue). Maybe a superflue fix, Anywho....pics:
http://www.ida.net/users/slambson/P18%20toes.jpg
http://www.ida.net/users/slambson/P18%20toes%202.jpg
http://www.ida.net/users/slambson/P18%20heels.jpg
http://www.ida.net/users/slambson/P18%20heels%202.jpg
I've got some lifter plates also, shims as well if you want to get to the 55mm FIS limit![]()
Bookmarks