Look Demo forward pressure

[SkiEvil]

I did a search and found this. Do the Looks function the same as the Rossi?

Also another Tech Talk Jongish question. I went to Home Depot and Lowes, asked both for a posidrive screw driver and the minions had no idea what I was talking about. Anyone have any luck buying them anywhere but on-line? This needs to be a national chain as I am most likely not where you are. Thanks!

[marshalolson]

I did a search and found this. Do the Looks function the same as the Rossi?

Also another Tech Talk Jongish question. I went to Home Depot and Lowes, asked both for a posidrive screw driver and the minions had no idea what I was talking about. Anyone have any luck buying them anywhere but on-line? This needs to be a national chain as I am most likely not where you are. Thanks!

as the other thread clearly stated, look=rossi

also, about 4 threads below this one:
http://tetongravity.com/forums/showthread.php?t=39917

[SkiEvil]

Thanks! Damn I am slow and partially cross eyed tonight.

[ulty_guy]

what about non-demo foreward pressure on these guys?

[Arty50]

For non demo, the screw head should be flush with the bottom of the arc the screw sits in.

[ulty_guy]

please pardon my jong-ness...

for the non-demo again, the screw we're talking about here is the one on the heel track, right? ok, so i snapped my boots in there and tightened the screw until the "the screw head should be flush with the bottom of the arc the screw sits in." i then released my boots, and the snapped them back in and the screw was further out by 1/4-1/2 cm. normal?

[focus]

^^^ yup. I pop my boots in and out a couple times to make sure i've got it dialed. when you just righten it up w/ the boot in there i imagine the boot sticks a little in the binding.