WTB/TRADE: RacecFace Turbine Cranks, Cinch, 175mm.

[rideit]

<p>
Trashed ends would be A-OK (I am planning to cut them down to 155 or so).&nbsp;<br />
Gotta be 175mm, shorter ones don&#39;t cut down as well.&nbsp;<br />
Also has to be Cinch interface, preferably with a 30mm BB spindle.&nbsp;<br />
(For a Rocky Powerplay, they only work with Cinch) ,&nbsp;<br />
&nbsp;</p>
<p>
Anyone have such a beast!?&nbsp;</p>

[Marshal Olson]

Trashed ends would be A-OK (I am planning to cut them down to 155 or so). Gotta be 175mm, shorter ones don&#39;t cut down as well. Also has to be Cinch interface, preferably with a 30mm BB spindle. (For a Rocky Powerplay, they only work with Cinch) , Anyone have such a beast!?

I dont, but would love to see a TR on the cut-and-thread mission!

[rideit]

I’ll keep you posted! I have a drill press and taps, the hardest part will be clamping them perfectly level.

[mntlion]

<p>

</p>
<p>
Trashed ends would be A-OK (I am planning to cut them down to 155 or so).&nbsp;<br />
Gotta be 175mm, shorter ones don&#39;t cut down as well.&nbsp;<br />
Also has to be Cinch interface, preferably with a 30mm BB spindle.&nbsp;<br />
(For a Rocky Powerplay, they only work with Cinch) ,&nbsp;<br />
&nbsp;</p>
<p>
Anyone have such a beast!?&nbsp;</p>
<p>

</p>
<p>
&nbsp;</p>
<p>
&nbsp;</p>
<p>
Again&nbsp; a TR would be great.&nbsp;&nbsp;&nbsp;&nbsp; Was thinking a jig, that threads into the 175 end, and has a sleeve (like a ski binding jig) to drill a vertical hole in the crank 20-25mm shorter.&nbsp; Then drill that out bigger, and tap etc.<br />
<br />
I have 715 on my altitude PP, and similar issues</p>

[rideit]

Nice!

[rideit]

Cranks procured cheap on ebay, stay tuned for a TR of the drilling.

[mntlion]

nice