Salomon Binding Hole Layouts

[AlpiNord]

In the interest of consolidating and organizing the various Salomon Binding Hole Patterns here is a PDF to use for comparing. Please let me know if you find any errors:

[stealurface831]

good stuff, Terry. many thanks.

[I Skied Bandini Mountain]

Noice! Downloaded.

[tenB]

Thank you!!!

[AlpiNord]

You're welcome.....thanks for 'validating' that I'm not the only one dazed and confused by all of the options.

Happy New Year!

[GiantManta]

Thanks Terry! Super helpful!!

[Djongo Unchained]

Not seeing the heel hole pattern for the STH1. Am I missing it? Toes are there.

Decidedly different than for STH2.

[AlpiNord]

Not seeing the heel hole pattern for the STH1. Am I missing it? Toes are there.

Decidedly different than for STH2.

Good catch. They've been updated.

[skisurfmirth]

Looks like the very bottom one to me


Sent from my iPhone using TGR Forums

[TexasGortex]

FYI, the PDF was updated today. Toe pieces #8 and 9 (counting down from top) were both labelled "Warden 11 & 13" except #8 had a width of 30mm and #9 40mm. They are now both correctly 40mm. Update your file if you saved or printed it!

Strive 12/14 appears to be accurate for a Strive 14 GW but defaults to the smallest end of the range. I'll probably adjust 1cm smaller to accommodate more boots (I have 335mm boots, hopefully no one has bigger boots than that).

[AlpiNord]

I was just informed the Strive 14 and 16 MN heel layout tool pattern is incorrect. The measurements I was given match the Strive 12 & 14. Can anyone please confirm both those heel patterns? Thanks!


Sent from my iPad using TGR Forums

[skivt27]

The Strive MN and Strive GW definitely have different heel bolt patterns from what I have read. I used a Warden 11 template from Knut Pohl to mount my Strive 14 GW and that was the correct hole pattern.

[AlpiNord]

That is what I though too, but the heel measurements I received for the Strive 14 MN are the same as the Strive 14: 30mm x 80mm (WxL). Among several tidbits of pieced together info, this is one from SpyderJon:

• The Strive 16 MN and the Strive 14 MN use the STH/STH2/Warden 13 jig.
• The Stage 10/11 and the Strive 12/14 use the Warden 11/Warden 11 Demo jig.
• The Strive 11 Demo and the Strive 13 Demo use the Easytrak jig.

I banged out a spread sheet (that needs verifications) like Skimo that shows toe & hole dimensions per binding. Also, included should be a BSC to hole dimension (at center of adjustment range) AND the adjustment range of each binding heel. The adjustment range and it's centers need input: