Atomic Mimic Professional Liner

[J. Barron DeJong]

Thanks. FYI, if you hit 'reply with quote' then hit it again a second later that seems to make it work for now.

Apostrohpies don't work though.

[Skip Dooley]

Good info GregL! I trust your opinion! Going to try Zipfits in the Hawx, and maybe a more aggro heel punch. If that doesn't work, I'll start down the Redster/Remedy road.

[J. Barron DeJong]

Good info! I trust your opinion! Going to try Zipfits in the Hawx, and maybe a more aggro heel punch. If that doesn't work, I'll start down the Redster/Remedy road.

Probably not a punch. Watch at 9:00 of this video: https://youtu.be/VCz5NyVUqKg?si=go-OGyo7SE0dmoLX Had this done on my boots and it's worked well for me.

[Skip Dooley]

Probably not a punch. Watch at 9:00 of this video: https://youtu.be/VCz5NyVUqKg?si=go-OGyo7SE0dmoLX Had this done on my boots and it's worked well for me.

Great vid!

That all resonates. Punches have definitely made things worse at times. Makes sense. I might get the dremel out and sacrifice these Hawx to see what can be done..



Sent from my iPhone using TGR Forums

[gregL]

Be careful. Grinding probably worked well for that rack of Redsters in the video, where the toe was about 5mm thick and the heel 6-7mm thick, but modern non-plug boots are way thinner . . .

[gregL]

Friend of mine ground through the heel of his brand new Cortex 140 Dual Boa, fortunately his own boot and not a customer's . . .

[tuco]

A little aquaseal and a used dryer sheet and that'll buff right out

[gregL]

Piece of Gorilla tape on the inside and he said they ski great.