Getting the Dynafit TLTs: Brakes and crampons? (do you need the housing unit?)
Well as the title says.
Ordering the TLTs next week and i tried to find out if the crampons need the "Housing Unit" for the toepiece to accomodate the crampons, or can you put them straight on the toepice? (some mixed info on this subject.)
And if you put the housing unit on the toe, does it raise the toe levell with the rearbinding (thus removing the ramp angle..) and you have to rise the rearbinging as well?
I´m gonna order the brakes as well,do they have rise in them itself?
Aand about the brake metall : Are they bendable or do you need to cut the
brake in the middle and weld a extra piece in to it to widen?
The brakes are "for skis 74mm in middle" and my skis are 88mm.
Crampons should fit almost without bending,since they are 88mm wide.Or?
Hey, and i would be thankfull for any tips possible, as i am a new dynafit convertee (got a "bit" fed of lugging im.103 monsters,trekkers and looks around...) so any Do´s and Dont´s well come handy.
Im getting the garmont megarides as well, the should be no suprises with the bindings,eh?
thx.
Oh boy, this is gonna be a loooong autumn.
The floggings will continue until morale improves.
Bookmarks