Check Out Our Shop
Page 1 of 2 1 2 LastLast
Results 1 to 25 of 47

Thread: "Ricer" car question

  1. #1
    Join Date
    Oct 2003
    Location
    Seattle
    Posts
    28,544

    "Ricer" car question

    So what's the deal with putting a black hood on a car that, other than that, is a different color? Is it more "core" for the car to look cobbled together or what?

  2. #2
    Join Date
    Jan 2005
    Location
    bushwood
    Posts
    661
    If it's legit, it's a carbon fiber hood, which saves some weight.

    But on lots of rice, it's probably just painted black to make it look like a cf hood from a distance.

  3. #3
    Join Date
    Oct 2003
    Location
    Seattle
    Posts
    28,544
    Can't you paint a carbon fiber hood? Of course, if you did, people wouldn't know you have a cf hood, then you'd lose those gnar points

  4. #4
    Join Date
    Dec 2004
    Location
    DePere Wisconsin
    Posts
    29
    I hate "ricers", what ever happened to people tricking out American Muscle?!?

    Found this online ripping on Rice Burners... Enjoy

    You might be a rice boy if..

    You have more exhaust decibels than your engine has horsepower.
    You have aftermarket FRONT wheels for racing but stock rear wheels.
    Your engine makes twice as much horsepower as torque.
    17" rims up front, 13" out back on your FWD.
    You ever painted your wheels to match the same color of your car.
    You put your automatic car in neutral at every stoplight in order to roll it back and try to fool other people into thinking you have a manual transmission
    DuPont gave up trying to figure out the shade you were asking for.
    Your mod list includes stereo equipment, shifter handle, MOMO steering wheel, PIA driving lights, exhaust tip, but no REAL engine parts.
    A chameleon lizard undergoes fewer shade changes than your custom paint scheme.
    Your rims and tires are so large, that you have to install the tire / wheel from underneath the car because it simply won't fit in the wheel well going in from the side.
    The dealer laughs when you bring your car back in for service under warranty, and you've only had it 6 months...
    Your tires / rims stick out from the lip of your car by more than 1".
    Your paint job is from the WRONG end of the color spectrum.
    You installed spacers on your STOCK wheels and tires to get them to stick out past the fender.
    You see cars like yours in a Shriner's Parade for Children and clowns are driving them.
    You bring an empty Maxwell House coffee can with you to compare size when you shop for an aftermarket exhaust system.
    Your Eclipse GS-T hardtop has a "SPYDER" emblem on the rear...
    Your sum knowledge of suspension is: "the more negative camber, the better the handling."
    You push your car through the staging lanes. That way, maybe you can break into the 16s by keeping the motor cool between runs.

  5. #5
    Join Date
    Oct 2003
    Location
    Seattle
    Posts
    28,544
    Someone at work suggested it might be to cut down on glare, too.

  6. #6
    Join Date
    Oct 2003
    Location
    写道
    Posts
    13,606
    Quote Originally Posted by The AD
    Someone at work suggested it might be to cut down on glare, too.
    You'd want a flat or matte black for that. Back in the day, race cars would have just a black stripe down the hood for this purpose. Much cooler lokking. IMHO.

    This is funny: You see cars like yours in a Shriner's Parade for Children and clowns are driving them.
    Your dog just ate an avocado!

  7. #7
    Join Date
    May 2004
    Location
    Detroit
    Posts
    2,131
    My buddy makes carbon fiber rims.
    They are kick ass.
    The 18" version weighs only 14 lbs.
    Coming soon to a car near you.
    Buy nice things here.
    www.motorcityglassworks.com

  8. #8
    Join Date
    Oct 2003
    Location
    the Quagmire
    Posts
    4,222
    People who make fun of other people cars make me laugh... I'm sure you all have something really awesome in your garage, eh?

    Black hoods were around a long time ago...





    For the record, I own a Dodge Dart, with, *gasp* a flat black hood scoop...

  9. #9
    Join Date
    Oct 2003
    Location
    Seattle
    Posts
    28,544
    Quote Originally Posted by crashnburn'd
    People who make fun of other people cars make me laugh... I'm sure you all have something really awesome in your garage, eh?
    No, I'll readily admit I have the most boring car on the planet--a Honda Accord--but some of this heavily customized cars definitely deserve derision. However, my question to begin with was legit. I really had no idea why they would want a black hood.

  10. #10
    Join Date
    Nov 2003
    Location
    Stuck in perpetual Meh
    Posts
    35,244
    Cue the Icy Hot Stuntaz....

  11. #11
    Join Date
    Sep 2001
    Location
    Babylon
    Posts
    13,837
    Quote Originally Posted by crashnburn'd
    For the record, I own a Dodge Dart, with, *gasp* a flat black hood scoop...
    nice
    how big is your engine?

    custom horn?

  12. #12
    Join Date
    Nov 2001
    Posts
    11,326
    Quote Originally Posted by The AD
    Can't you paint a carbon fiber hood? Of course, if you did, people wouldn't know you have a cf hood, then you'd lose those gnar points

    You can but it will not match the paint on the sheet metal. IMHO the raw Cf is much niver looking (if that's your thing) than painting it and ending up just one step too light or dark. Something in the way the paint bonds to the materials makes it impossible to match it.

    And for the record, I have something awesome in my garage.

  13. #13
    Join Date
    Dec 2002
    Location
    Bellingham, WA
    Posts
    4,334
    One of the funniest ricer websites around... www.riceboypage.com

    And I have big plans for a couple things, does that count?

    nrthface: American muscle sucks.
    OOOOOOOHHHH, I'm the Juggernaut, bitch!

  14. #14
    Join Date
    Oct 2003
    Location
    the Quagmire
    Posts
    4,222
    ad - comment wasn't directed at you, I should have quoted.

    woodsy - It's a 360 and sadly, the horn doesn't work. Hopefully, someday I'll have enough money to put a musical air horn of some sort in it.

    truth - this is really awesome

    Last edited by crashnburn'd; 06-01-2005 at 06:41 PM.

  15. #15
    Join Date
    Apr 2002
    Location
    NorCal
    Posts
    952
    American muscle is fine but they don't hold a candle to old school rice on anything outside a straightaway. I built up a 510 in High School that would smoke new mustangs and I'm seriously considering a 240z project.

    Something like this weighing in around 2200 lbs poping 270+ naturally asperated ponies with the tits handling. Oh jeah!


  16. #16
    Join Date
    Nov 2001
    Posts
    11,326
    LMAO...all better now with all sorts of new toys going on over the next week.

  17. #17
    Join Date
    Oct 2003
    Location
    the Quagmire
    Posts
    4,222
    Quote Originally Posted by truth
    LMAO...all better now with all sorts of new toys going on over the next week.
    nice, like what?

    custom horn?

  18. #18
    Join Date
    Dec 2004
    Location
    DePere Wisconsin
    Posts
    29
    Quote Originally Posted by BakerBoy
    One of the funniest ricer websites around... www.riceboypage.com

    And I have big plans for a couple things, does that count?

    nrthface: American muscle sucks.
    I disagree my friend... I have many friends with so called "Ricers" of which I must say are nice cars. BUT any true American must give respect to American Muscle and the true power they carry.

  19. #19
    Join Date
    Oct 2003
    Location
    Seattle
    Posts
    28,544
    Quote Originally Posted by crashnburn'd
    custom horn?
    Maybe he was thinking of the General Lee, which was a Dodge Charger, I believe, definitely not a Dart.

  20. #20
    Join Date
    Dec 2003
    Location
    Washington, D.C.
    Posts
    2,352
    m dump-
    what are you thinking of dropping in there? I have a friend who dropped a SR-20DET (i think) engine from a JDM front clip into an SX240... who dreams of putting one in a 240Z. He's done research up the wazoo- if you want to I can give you some contact info for him... though an RB26 would be make serious ass clowns of almost anyone who tried to give you a go....

  21. #21
    Join Date
    May 2002
    Location
    Bellingham
    Posts
    1,698
    I had a friend put a chev 350 into a Morris Minor as well as Renault 5 seats. Ooh la la!
    In drove this drunken madman and stopped on a dime! Unfortunately the dime was in Mr. Rococo's pocket!

  22. #22
    Join Date
    Apr 2002
    Location
    NorCal
    Posts
    952
    The sr20 is a sweet motor. It's forefather (fj20) is what I put in my 510, but the 240z is way cleaner with a built up version of its na straight 6.

  23. #23
    Join Date
    Oct 2003
    Location
    MI
    Posts
    4,956

    Post

    Quote Originally Posted by nrthface234
    I disagree my friend... I have many friends with so called "Ricers" of which I must say are nice cars. BUT any true American must give respect to American Muscle and the true power they carry.
    I love American muscle but I love quick & light cars too.

    All that's happening when you buy an American car is lining the pockets of Detroit CEOs. Especially after we signed on to NAFTA.

    I'm not sure if you knew but Toyota assembles cars in the U.S. Major Subaru base in Indiana too.

    In Sonora, Hermosillo is home to a Ford plant and it continues to expand. GM as well has a few plants outside of the U.S. Executive decisions about Chrysler are made in Germany. There's a reason why there's so many flights into and out of Germany via DTW. China as well.

    That's globalization for you, my friend.
    Balls Deep in the 'Ho

  24. #24
    Join Date
    Dec 2004
    Location
    DePere Wisconsin
    Posts
    29
    Quote Originally Posted by 13
    I love American muscle but I love quick & light cars too.

    All that's happening when you buy an American car is lining the pockets of Detroit CEOs. Especially after we signed on to NAFTA.

    I'm not sure if you knew but Toyota assembles cars in the U.S. Major Subaru base in Indiana too.

    In Sonora, Hermosillo is home to a Ford plant and it continues to expand. GM as well has a few plants outside of the U.S. Executive decisions about Chrysler are made in Germany. There's a reason why there's so many flights into and out of Germany via DTW. China as well.

    That's globalization for you, my friend.
    Interesting info... I don't mean to "hate" on "Ricers" because as with everything there are many that are legit. What gets me are the half-ass pimp jobs that are done to some of the cars.

  25. #25
    Join Date
    Oct 2003
    Location
    MI
    Posts
    4,956

    Talking

    Quote Originally Posted by nrthface234
    Interesting info... I don't mean to "hate" on "Ricers" because as with everything there are many that are legit. What gets me are the half-ass pimp jobs that are done to some of the cars.
    Oh I rip on ricers every chance I get.

    They're huge cop magnets and every time one gets pulled over, I know that in addition to their traffic violation, they're getting slapped with huge fines for stupid shit like obnoxiously loud exhausts & tinted windows... You get the idea.

    Heh. They make excellent minesweepers on long drives.
    Balls Deep in the 'Ho

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •