Anybody have K2's 2005 Tech manuel handy. What do drill bit do they recommend for Made'n and SPs. Since there's no metal my instincts say 3.5, but I only go on instincts when I'm mounting customers gear, not my own. I don't have a manuel and I'm too lazy to call K2. Thanks.
Results 1 to 4 of 4
-
02-17-2005, 03:34 PM #1
Calmer than you are.
- Join Date
- Oct 2003
- Location
- Ski-attle
- Posts
- 4,217
Paging Techs: 3.5 or 4.1 on Made'ns
ROBOTS ARE EATING MY FACE.
-
02-17-2005, 03:41 PM #2
Registered User
- Join Date
- Sep 2001
- Location
- Salt Lake City
- Posts
- 2,314
Its not just instincts it is the LAW. No metal = 3.5. Metal = 4.1. Now rules on when to tap or not are different. But by my rules, tapping is just a waste of time
"I dont hike.... my legs are too heavy"
-
02-17-2005, 04:37 PM #3
Registered User
- Join Date
- Jun 2004
- Location
- Vancouver, BC
- Posts
- 333
3.5 mm bit. On skis that I wasn't 100% sure of the construction, I've drilled a 3.5mm hole and inspected the chips (while leaving the jig on the ski). If I find metal, its no issue to drill out the hole to 4.1 mm.
-
02-17-2005, 04:53 PM #4
Aging Badly
- Join Date
- Oct 2003
- Location
- Jack Tone Road
- Posts
- 12,735
If you can't find a guy named Manuel in OR, you really are lazy.
Originally Posted by bossass
Reply With Quote
Bookmarks