A shop mounted a pair of my skis with salomon bindings then later I wanted to use them for tele so I had the solly holes plugged and put G3s on them now I want to go back to the sollys how do i acomplish this? Step one is obviously take the G3's off and plug those holes but how do I get the plastic plugs out of the solly holes
Results 1 to 3 of 3
Thread: pulling binding hole plugs
-
08-10-2004, 11:21 AM #1
Often Flagged
- Join Date
- Jul 2004
- Location
- Troy, NY
- Posts
- 235
pulling binding hole plugs
Last edited by supercow; 08-10-2004 at 11:24 AM.
- Excessive, obsessive gear questioning 10 yards, loss of down
- Not using techtak 5 yards
- Excessive spraying 10 yards loss of down
-
08-10-2004, 11:23 AM #2
Lackey
- Join Date
- Oct 2003
- Location
- Hunter Thompson described it as hell.
- Posts
- 2,641
Use a 3.5 bit and carefully drill them back out. the bit will pull the plug apart and bring it out of the hole.
If you dont have a bit, you could do it ever so carefully with a drill bit. Might find a small dentist pick or something to get the extra out.Skiing, where my mind is even if my body isn't.
-
08-10-2004, 08:54 PM #3
Registered User
- Join Date
- Apr 2004
- Location
- Southeast New York
- Posts
- 12,595
Take a #1 phillips and tap it in the center of the plug then just back it out like you're removing a screw. Works everytime. Then a bit of epoxy when you put the screws in and you're good to go.
Reply With Quote
Bookmarks