Beer + Shipping Thread

While going through my parts bin I realized I have a decent amount of stuff I don’t need but may not be worth much but may be needed by some mags. And I know a lot of you fools have A TON of stuff and are in the same boat.

Was thinking this may be a good spot for guys to post up what they have or perhaps what they need?

Spank Spike rebuilt kit

Wide variety of bushings, spindles and pins. Think the platforms are potentially dead but maybe not??
Attachment 463832
Attachment 463833

Crank brothers eggbeaters. Think the very basic model. Limited use.
Attachment 463834


Sent from my iPhone using TGR Forums

messaged re: egg beaters

This is a good idea.


Sent from my iPhone using TGR Forums

Quote:

---

Originally Posted by justo8484

messaged re: egg beaters

---

Responded. I should mention I’m in Western Canada so shipping may be prohibitive to good deals but I’m willing to try!


Sent from my iPhone using TGR Forums

Surely someone needs some clipless shoes right? Size 45.5/US 12.5 Bontrager Rhythm shoes from a few years ago. Fully functioning but the Boa cables should probably be replaced. Have the parts from Boa, but never got around to it and recently replaced these with some spec. Recons.

Attachment 464485

Attachment 464486

I've got a SRAM Rival 22 crankset. 46/36 BB30.

35mm Schwalbe g-one Allround tires with less than 100 miles on them.

This thread is a fantastic idea. I know I've got a bunch of stuff in my workbench drawers that I don't need.

Got a SRAM XG1175 10/42 tooth cassette that could use a home. XD driver. Decently well used but life left for sure.

Attachment 464542

OK here's what I'm holding. Photos available upon request.

4 sets Hayes Dominion A4 organic 106 pads brand new (the black ones)
3 BikeYoke dropper levers (1 is old style and relies on clamp at dropper, 1 is intermediate age and has a grub screw, and 1 is newer version with grub screw and a bearing for swivel)
1 Wolf Tooth Drop Stop A, SRAM direct mount 3 bolt, 32t, lightly used
RockShox Zeb 160mm air shaft part number 11.4018.111.024, BNIP
Wheels MFG BSA 30 bottom bracket, bearings are brand new, inner plastic sleeve is cracked but functional
2 pairs Ergon GE1 Evo Factory Slim grips, moderate use
2 Specialized Zee bottle cages, right hand
2 Ergon SM Enduro Pro Ti saddles, size small. One has light wear on back edge, other is a bit frayed

Quote:

---

Originally Posted by Andeh

OK here's what I'm holding. Photos available upon request.

4 sets Hayes Dominion A4 organic 106 pads brand new (the black ones)
3 BikeYoke dropper levers (1 is old style and relies on clamp at dropper, 1 is intermediate age and has a grub screw, and 1 is newer version with grub screw and a bearing for swivel)
1 Wolf Tooth Drop Stop A, SRAM direct mount 3 bolt, 32t, lightly used
RockShox Zeb 160mm air shaft part number 11.4018.111.024, BNIP
Wheels MFG BSA 30 bottom bracket, bearings are brand new, inner plastic sleeve is cracked but functional
2 pairs Ergon GE1 Evo Factory Slim grips, moderate use
2 Specialized Zee bottle cages, right hand
2 Ergon SM Enduro Pro Ti saddles, size small. One has light wear on back edge, other is a bit frayed

---

How did you find those saddles? Comfortable? I’m potentially interested in one


Sent from my iPhone using TGR Forums

Message sent!

QUOTE=Andeh;6889154]OK here's what I'm holding. Photos available upon request.

4 sets Hayes Dominion A4 organic 106 pads brand new (the black ones)
3 BikeYoke dropper levers (1 is old style and relies on clamp at dropper, 1 is intermediate age and has a grub screw, and 1 is newer version with grub screw and a bearing for swivel)
1 Wolf Tooth Drop Stop A, SRAM direct mount 3 bolt, 32t, lightly used
RockShox Zeb 160mm air shaft part number 11.4018.111.024, BNIP
Wheels MFG BSA 30 bottom bracket, bearings are brand new, inner plastic sleeve is cracked but functional
2 pairs Ergon GE1 Evo Factory Slim grips, moderate use
2 Specialized Zee bottle cages, right hand
2 Ergon SM Enduro Pro Ti saddles, size small. One has light wear on back edge, other is a bit frayed[/QUOTE]

Quote:

---

Originally Posted by Sandbox

How did you find those saddles? Comfortable? I’m potentially interested in one


Sent from my iPhone using TGR Forums

---

I really, really like them. They're like a WTB Silverado but with a hint of a raised tail and with a bit more cushion under the sit bones. The narrow width gets out of the way when descending nicely. I'm actually using the Comp version (steel rails) on both my bikes now, same width, because the Ti versions have a fabric rear end that gets frayed from my pants/shorts rubbing during descending.

Quote:

---

Originally Posted by Spencer123

Message sent!

---

Didn't receive any, sending you one instead.

Perfect. Hopefully my response this time went through

QUOTE=Andeh;6889388]Didn't receive any, sending you one instead.[/QUOTE]

Here's photos of the saddles for Spencer & Sandbox:Attachment 464593Attachment 464594

Pm inbounds Andeh - will join back of line for a saddle if the others pass

I’ve been saddle curious for those for awhile. If Andeh is willing to deal with the hassle of shipping north of the border ( and if it isn’t insane) I’d grab one… if not I understand and I’ll drop out


Sent from my iPhone using TGR Forums

I’m out on the saddles. Shipping will be a bitch…. Thanks for trying tho, Andeh


Sent from my iPhone using TGR Forums

I’ll take one of those saddles if still available. Pm incoming.


Sent from my iPhone using Tapatalk

Sent you a reply with payment info. 2nd one is yours if you want, can get it out today.

Both saddles and 2 pairs of the Dominion pads are gone.

Crank brothers pedals are gone


Sent from my iPhone using TGR Forums

Unused take-off chainring: Sram eagle X-sync 2 32 tooth

Used WTB silverado narrow (135 mm) saddle. The edges are torn up a bit and it has been well loved, but still works fine.


Attachment 464751

Attachment 464752

What offset on that X Sync chainring? It should be stamped on the back side - 0, 3, or 6.

Oh yah, forgot to put that in there! It's 3 mm boost. Came off a GX eagle Dub boost crankset.

Quote:

---

Originally Posted by El Chupacabra

What offset on that X Sync chainring? It should be stamped on the back side - 0, 3, or 6.

---

Some of these things are large/great shape/new/etc. So, man, GOOD beer money.

Ruffwear dog coat "L" NWT
Attachment 464791
Attachment 464792

Yari chassis, Lyrik guts 29 x 180mm NON-Boost
(short steerer tube - ugh - hard to sell. dumb. oops.)
Attachment 464793
Attachment 464794
Attachment 464795
Attachment 464796

SRAM 900 series 12 x 142 hub with some sort of Velocity 700c (narrow, like 19mm inner width) rim, HG body on, with XD-R body as well.
Attachment 464797
Attachment 464798

Shimano winter boots, 42M much use, but much life left
Attachment 464800

Bontrager Foray 42W Maybe two rides on them
Attachment 464801

Keen 39W shoes, never even had cleats mounted.
Attachment 464802
Attachment 464803

Bontrager winter boots 43M new!
Attachment 464804

POC Joint VPD Air NWT size small
Attachment 464805

Avid Code pads (first gen - won't fit the new stuff) 4 pair (1 out of package obviously)
Attachment 464806
Attachment 464842

Boxxer 20 x 100 Maxle Stealth
Attachment 464807

MRP Boost adapter kit for Hope Pro2/Pro4 FRONT hubs
Attachment 464808

Answer Boxxer direct mount stem 50/55mm
Attachment 464809

Rock Shox Boost 15 x 110 axle, Rockshox Fat axle 15 x 150
Attachment 464810

Axles - road fork sizes 12 x 125 x 1.5TPI
Attachment 464811

SRAM 11spd grip shifter
Attachment 464812

Wolftooth chainring mount bash guards - don't recall exactly which model they fit. Never used.
Attachment 464813

Manitou Swinger 230 x 65
Attachment 464816

Monarch R Debonair air can 200 x 57
Attachment 464817

Monarch RT 216 x 63
Attachment 464818

Quote:

---

Originally Posted by Spencer123

Oh yah, forgot to put that in there! It's 3 mm boost. Came off a GX eagle Dub boost crankset.

---

Thanks - that's exactly what I use, but I checked my parts bin, and somehow already have 3 spares...so this should probably go to someone else.

Some bigger things. Make offers of some good beer money!

2020 Commencal Meta TR29 frame, large.

https://tech.commencal.com/bike/COMM...-2020/416.html

you'll need a (210x 55) shock. scratches, scrapes, but no dents or dings. BB included (to fit a SRAM 24mm crank) or can be removed. Spare hanger and front shock mount bolt.

Very fun bike, but I wanted something a little lighter/playful/whippy for my locale. this is more plow than I wanted. If living out west/somewhere with more and longer contiguous descending than western CT, I'd keep it.

Attachment 464821

Attachment 464822

Chromag Kamui small from 2015?? maybe. I don't recall.
Lots of scrapes, gouges and small dents. Drilled out derailleur cable stops to run full housing. Very, very fun bike. Thous would be a great ripping bike for a kid or a smaller human. The biggest downside is the 27.2mm post size.

Attachment 464823

Attachment 464824

Chris King 44/49 headset

Attachment 464825

XTR crank - well used, but all threads intact. Missing one of the pinch bolts. You'll need chainring bolts. Aftermarket preload bolt. unused Wolftooth ring and a stainless Warhawk ring - not narrow wide, but tall tooth profile - near as good. Outer bash that works well with the Warhawk ring.

Attachment 464826
Attachment 464829
Attachment 464834
Attachment 464835


[ATTACH=CONFIG]464836[/ATTACH


Deore single piston brake setup. 160mm centerlock and 140mm 6-bolt rotor. All new. I've been on Avid/SRAM since day 1 going to disc brakes. I have no idea where/how these got into my parts bin.

Attachment 464837

Mastodon Comp EXT 120mm
Stanchion intact. One of the footnuts is sub-optimal with only about half the threads existing, but has been holding fine for a long while.

Attachment 464838
Attachment 464839
Attachment 464840

Wolftooth 1* angleset for 44/56 headtubes

Attachment 464841

Some solid items.... although i wonder how much "beer money" is going to be needed for some of those larger items? That Chromag looks like a lot of fun as well!!

Quote:

---

Originally Posted by Sandbox

Some solid items.... although i wonder how much "beer money" is going to be needed for some of those larger items? That Chromag looks like a lot of fun as well!!

---

Yeah...

Was needing to do a Sale! post here soon anyhow, so just decided to piggyback on this thread.

It was! I've just moved on to longer/larger/different frames. It's been ridden hard, but is still super solid. One of the Mike Truelove built frames. https://us.chromagbikes.com/blogs/news/ultimate-master

https://chromagbikes.myshopify.com/pages/2013-kamui

Whoa. Earlier than my memory suggested. Though I think it was late in 2014 when actually purchased. A couple years of trail riding, then it was my commuter bike frame for several years.

New offset shock bushing I bought from offsetbushings.com years ago for a Trek. 40mm X 8mm size. I think it slackens the hta 0.5deg.

Attachment 464866

Attachment 464867

Attachment 464868

Attachment 464869

Attachment 464870

Attachment 464871

Attachment 464924

Perhaps the first beer bought with funds from this thread. Pedals are Otw, justo!


Sent from my iPhone using TGR Forums

Sounds good. If you start burning through them just let me know!

Saddle and pads from Andeh came today, stoked.

Quote:

---

Originally Posted by El Chupacabra

Thanks - that's exactly what I use, but I checked my parts bin, and somehow already have 3 spares...so this should probably go to someone else.

---

Pm on the mastodon….

Older GoPro Hero 3+. One original battery, three aftermarket ones, battery backpack, and housing. Functions well, just have a newer cam. Attachment 464999

Lg Dickies Michelin work shirt, Navy Blue.
Attachment 465044

How big is this parts bin?!

Quote:

---

Originally Posted by Thaleia

How big is this parts bin?!

---

Perhaps deep enough that someone has a fox transfer 31.6 x 175 with that bling K coating? Will pay more than beer money as well. I’ve been abused by the reverb long enough…. I need to break away from this abusive relationship


Sent from my iPhone using TGR Forums

Anyone got a beat up old pair of Deity TMACs they want to flip for more than beer money? My wife murders pedals.

Two pair of Oakley sunglasses.

Attachment 465086


Sent from my iPhone using TGR Forums