Hi,
Any one out there working in a shop that happens to have spare volcano for an older set of dynafit TLT vertical bindings? T
Thanks
Printable View
Hi,
Any one out there working in a shop that happens to have spare volcano for an older set of dynafit TLT vertical bindings? T
Thanks
check out B&Dskigear.com
skimo.com sells used parts, I think. I think I have the top plate for an old TLT Speed that might fit if you want an inelegant solution. Cant remember if the screw holes match up between those generations.
Thanks both - some solid resources there!
I just checked, and I do have a TLT speed top plate but it won't fit a Vertical, nor with th B&D plates.
Here is the skimo.co used parts page, but it doesn't look like they have what you need in stock either (although it might be worth calling): https://skimo.co/used-dynafit-parts
If you're not running brakes you could use pretty much and Dynafit heel up to the Speed Radical (newer models have a different pattern) and drop it in the same holes, although pre-Comfort models have less adjustment range. Plum Guides also use the same pattern.
Good luck.
I have a few spare FT and ST heels that are in various states of disrepair and probably will never be used again. Shoot me a PM and I'll send you pics of what I have, if you can part with a few $$ for shipping (and maybe for a decent 6-pack for making me wander into the PO :D) I'm happy to send something your way.
Bumping this, upgrading my touring setup and wondering if ski crampons from my 2016 TLT Radical FT's will work with the current ST Rotation 12.
I have some extra speed turn 2.0 heel top plates. The og metal top plates that you affix one or 2 plastic donuts to alter the climb height. I dont think i have the donuts but maybe somewhere. Still has a decent high position without. Free plus shipping if anyone can use them(from canaduh)
Id like to find 2 heel pieces with the og dfit mounting pattern like a speed turn 2.0. Nice to have that adjustment range. Speed heels or plum heels would work also, if anyone is offloading
Sent from my SM-G950W using TGR Forums mobile app
Yes, they're the same fixing system.Quote:
Originally Posted by JaytaeMoney
Thank you sirQuote:
Originally Posted by Spyderjon
A few spare parts from Older TLT bindings
Attachment 353025
Sent from my iPhone using TGR Forums
Anyone holding on to a set of base plate with 110 mm brakes for some old Radical FTs (the 1.0 2016ish version)?
I have 2 sets of 130 mm plates and want to move the bindings on skinny sticks, 100mm underfoot. I've bent Dynafit brakes before to widen them but I haven't tried narrowing them. The skis+bindings are a gift for a buddy's daughter who is just starting to tour and he wants brakes for her. If I can avoid giving her some janky old bent stuff it would be ideal.
I have plenty of older Vertical ST/FT parts to trades if anyone's interested.
This is the binding:
Attachment 353146
For the life of me I couldn't find this thread. I have the volcanoes from old Dynafit Comforts. Free to whoever wants them
Thannks for the offer - I ended up going with a Band-Aid fix of slow set epoxy, but if you're ever in whistler I owe you a pint for the offer... CheersQuote:
Originally Posted by Boissal
Glad it worked out. The offer stands if anyone else is in need of FT/ST parts, I have 2 sets mounted and 3 heels kicking around that I'd charge on without a 2nd thought.Quote:
Originally Posted by knowsam
By old comforts - do you mean Vertical ST's or pre-vertical, if vertical, I've got a case of beer with your name on it next time you're passing through the S2S. I've gone with epoxy for now, but given you're 10 min away, I might give replacing the volcanos at shot.Quote:
Originally Posted by LeeLau
Ah sorry Pre - Vertical. ER has two boxes of Dynafit parts fyi - I've added to it from time to time. Go have a look.Quote:
Originally Posted by knowsam
I’ve got a pair of those mounted to some skis I’ve been planning to take off. They may be wider than 110mm plates as I think the skis are around that width. I’m out of town for work, but could check for you in the next week or so.Quote:
Originally Posted by Boissal
Sent from my iPhone using TGR Forums
Those brakes have arms that angle out wards to begin with so if you bend them in they will work better and its really simpleQuote:
Originally Posted by Boissal
You bend them at the 90 and also just above the brake paddle so the arms tuck inwards on the back of the ski, this works well because when you step on the brake stomp pad the arms move up and then inwards
if the 90 degree part sticks out IME it doesnt matter cuz they won't catch with the tips of the brake nicely tucked in, i might have a picture
I own 2 pair of Verts and a Rad1 for redundancy so if something breaks I got spares, I took a whole heelpiece to Japan
Attachment 353735
This is a set of salomon arms in a Dynafit heel piece on a Lotus 120 you have to enlarge the holes in the base plate slightly to fit the arms in the baseplate
Attachment 353736
I think this is a 130 dynafit brake on a 108 Dynafit Stoke
I wish I had 3 pair of Verts instead of the Rad, rads suck
Hey I'm looking for just the center metal tower bit on the Vertical ST heel (though I'd take the base plate as well). Any chance you or anyone else would be willing to part with one of these?
The local shop swapped in a Radical FT tower which works but I can't lock into the riser positions. Not sure if a Comfort tower would work as well or if its a different height, but sounds like a few folks have Vertical parts to share?
Happy to send some $ in exchange
Saw this post from a long while back. Any chance you still have a FT 12 heel that you're willing to part with? My heel piece is busted.Quote:
Originally Posted by Boissal
Best-
Noah
i haz what you need and can trade other partsQuote:
Originally Posted by Boissal
https://hosting.photobucket.com/imag...080&fit=bounds
so i goes to ski mo the other day cause i need an 80 buck atk brake
i bring my bin o parts in lookin to trade some parts
they ask what do you want
im like well yeah couple decades in the business id think 50% off what you plan on selling them for is fair
dude pulls out 2 new rad 2 toes and 2 new heal with brake asemblies
and wants to trade a complete set of binders for an 80 buck brake
im like bob barker fuck no we aint makin that deal
heres my credit card
that math aint gonna work for me
so i got parts
pm and ill try and reply
I'll check tonight and send you a PM, can't remember what I have on hand at this point.Quote:
Originally Posted by NMF
SFB, thanks for the offer, I don't need the FT12 plate any longer but I'm sure I'll break something else on a Dyna binding at some point soon.
Hey Boissal, I just joined so I don't have access to PMs yet. You can contact me through through Instagram at NMFCreations or though my email at nmfcreationsllc at gmail
The heel piece I have and need a new version of is that old original Ft 12 that ski fish boss has on the table between his two clear tubs.
Thanks again for checking!
Quote:
Originally Posted by Boissal
Old touring boots were stolen, and have been unable to find the power insert horseshoes anywhere. Need these pieces to make my new boots compatible with my beast bindings. If you have a set around somewhere, I'll pay you for them.
Sorry to bump an old thread but how do you remove the turrets from the heel of dynafit rotation bindings? I removed the screw, springs, and plunger and it rotates freely but will not come off of the base.
https://www.wildsnow.com/23178/compa...ation-binding/
It's this "bayonet lock" design. I think you twist and pull simultaneously and they come off.
Some assorted Dynafit parts
FT12 heel mounts and toes, plus most of the screws one would need for these. Mounting plate brakes fit up to 108 mm underfoot skis.
The toes were mounted without the 5th front screw for several seasons and now won't fully lock out in climb mode. One might be able to bend the front bit down so they work normally again.
Was thinking $20 + shipping from California for the whole package but happy to part things out.
Attachment 437418
I have some B&D 6.4mm toe shims for radical ft 2.0 bindings if anyone is looking.
New in packaging from skimo.
$21 plus shipping , half of skimo's price plus shipping from canada. Shipping is around 10usdAttachment 483708Attachment 483709
Sent from my SM-A536W using TGR Forums mobile app
I mounted a set of ST the same without that front screw cuz i didnt want to drill for 3 screws across ( due to a remount ) which i felt would weaken that particular ski, I havent had a problem with the lockout not working but I would bet you could bend the frame a bit OR if the 5th screw was used it would probably suck the frame right down flat against the skiQuote:
Originally Posted by Blaster
Ah.... found thread again
ISO
Dynafit Comfort volcano
Dynafit Vertical heel tower (just the top plate)
I donated spare parts to Waddingtons in Whistler. Lmk if you need any of these and I'll make sure they still have them in the bin
Dynafit brakes Radical 110mm
Dynafit toe piece. The X-centre lever is gone. It's the 5 screw older model
Dynafit Speed heel piece. The 10mm adjustment model
Frischi Xenic heel
I think I have a vertical heel tower unless I already gave it away. I can check tmrw night. Feel free to PM me if I forget…
Sent from my iPhone using TGR Forums
Thanks!Quote:
Originally Posted by skis_the_trees
Lee, I have two white Vertical ST top plates/heel risers. I'll send you a PM and we can figure out the logistics.