-
1 Attachment(s)
knut warden 11 template
So I placed knuts template lined up for a 315 bsl over a template ive used and my 315 landed right in the middle of the heel adjustment. The Knut heel screws were 12mm further from the center. The toe lined up the same on both. I tried to upload a pic of the 2 templates on top of each other and failed apparently. Knut over verified template https://ibb.co/7JjPgBcN. Knut under verified template https://ibb.co/jkQXpVjM
-
Marker alpinist Demo
Hi!
I am looking a template for marker alpinist Demo binding. If anyone can help!
-
Current gen Marker Royal Sole ID toe question ... I don't think anything has changed with the Marker Royal pattern in a while, correct?
I'm hoping to confirm that current-gen Sole ID toes should drop right into holes from a Marker Lord SP 13 ... (this toe is not really GW compatible because the angle of the AFD track wasn't set up correctly for GW soles in the alpine toe position)
-
Quote:
Originally Posted by
AlpiNord
Edit: Its not letting me quote the right post...That's supposed to be in responsed to the Dynafit Ridge and Seven Summits+ Templates
Based on some measurements someone took for me for a template:
-pin line is 17mm in front of rear set of toe holes
-heel tower is 7mm back from forward heel holes (to plastic, no heel gap subtracted)
-->ridge has a 2mm heel gap
-->Seven Summits+ has a dynafit standard 5.5mm gap
I am guessing they split the difference on the official jig and say 1.75mm off of nominal center of adjustment is not a big deal
Not 100% verified with an actual mount yet.
-
Atomic/Salomon Colt 7/L7
Anyone ever seen a template for a kids colt binding? https://www.atomic.com/en-us/shop/pr...ml#color=21406