Binding Mount Paper Templates

Quote:

---

Originally Posted by Alpinord

I'll need to circle back again and clean up a template if it'll work, but this is what I have for Warden demo layouts:

Attachment 491243

As noted, I'd think Pivot heels ought to clear. You'd need to confirm toes. If there is, you can always plug holes and/or maybe install ss inserts.

---

Thank you!

Sent from my SM-S908U1 using Tapatalk

In today’s dynamic and quickly evolving business landscape, organizations constantly seek innovative strategies to remain competitive and achieve sustainable growth. This is where management consulting services play a pivotal role.

Quote:

---

Originally Posted by ASmileyFace

Any info on this? I cannot get the Stage to match anything I've seen before.

---

Not sure if the 10s are different, but I just mounted some Stage 11s this morning for my lady using the Warden 11 / Strive 12,14 template. It was perfect.

ive searched but im having trouble finding the sth template if anyone can help out

Quote:

---

Originally Posted by bearcub69

ive searched but im having trouble finding the sth template if anyone can help out

---

STH:

https://docs.google.com/file/d/0B0Sn...hOVmQ5ZGM/edit

STH2:

https://drive.google.com/file/d/1maC...w?usp=drivesdk

Quote:

---

Originally Posted by NW_SKIER

STH:

https://docs.google.com/file/d/0B0Sn...hOVmQ5ZGM/edit

STH2:

https://drive.google.com/file/d/1maC...w?usp=drivesdk

---

big thanks

Anybody have a template for the new marker griffon demo? It no longer matches the previous griffon demo/schizo template.

Sent from my SM-S928U1 using Tapatalk

Quote:

---

Originally Posted by skibummin

Anybody have a template for the new marker griffon demo? It no longer matches the previous griffon demo/schizo template.

---

Lucknau posted one circa 2018 - I've got no experience with the mount itself but he said he'd checked it out. I'm not 100% sure that 2017 Marker demos are == to 2024, but checking a tech manual from here shows that the product ID for the jig for Marker TCX demos in 2022 matched the product ID lucknau mentioned elsewhere in the thread in 2018 - and I'm pretty sure no changes to Marker demos in the past couple of years at least. Would def mount on a 2x4 first to confirm holes and boot center, but it should be a decent start.

Quote:

---

Originally Posted by lucknau

Made a template for post 2017 Griffon/Squire Demo:

Marker Griffon and Squire Demo c.2017 template

Tested on several boot sizes ranging from 260mm to 337mm. Boot center for all tests landed with an accuracy of 2mm on either side of the reference mark.

---

Marshal was also asking about new marker demos upthread, he might have found a solution he can share too.

Quote:

---

Originally Posted by shank

Lucknau posted one circa 2018 - I've got no experience with the mount itself but he said he'd checked it out. I'm not 100% sure that 2017 Marker demos are == to 2024, but checking a tech manual from here shows that the product ID for the jig for Marker TCX demos in 2022 matched the product ID lucknau mentioned elsewhere in the thread in 2018 - and I'm pretty sure no changes to Marker demos in the past couple of years at least. Would def mount on a 2x4 first to confirm holes and boot center, but it should be a decent start.



Marshal was also asking about new marker demos upthread, he might have found a solution he can share too.

---

Thank you, I think that second template is the right one. I'm mounting a monoski for a friend and will confirm on a board first.

Sent from my SM-S928U1 using Tapatalk

Tyrolia attack and look pivot templates still valid? From 2009

Quote:

---

Originally Posted by auvgeek

^^ Do you not have access to a printer or are you a retard?

If the former, that sucks. If the latter, read the first post in this thread. I award you no points and may god have mercy on your soul.

(Sorry, I'm in a pissy mood.)

---

This is the first post that Google found . Fking hilarious! Lol..

Quote:

---

Originally Posted by byates1

Tyrolia attack and look pivot templates still valid? From 2009

---

Those two you have to be careful with as there are different paper templates floating around for each that are slightly different, where both have been supposedly verified at one time or another. There is discussion on both probably somewhere in this thread.

My understanding is the following:
For Tyrolia, use Knut Pohl's template (Binding freedom template is off by ~5mm for toe placement)
For Pivot use binding freedom template (Knut Pohl's template is off by ~3mm for toe placement)

You know this will sound like crazy talk but you can just check the binding on the paper to see if its correct

Quote:

---

Originally Posted by XXX-er

You know this will sound like crazy talk but you can just check the binding on the paper to see if its correct

---

With what I am talking about, the pattern is correct but the location of the toe relative to mount center is off and would put your mount forward or backwards of intended.
You'd have to do a full test mount to see it.

Quote:

---

Originally Posted by XXX-er

You know this will sound like crazy talk but you can just check the binding on the paper to see if its correct

---

Next level

Does anyone know if the new Shift2 has the same mounting pattern as the original Shift? TIA.

Quote:

---

Originally Posted by kuuskuus

Does anyone know if the new Shift2 has the same mounting pattern as the original Shift? TIA.

---

same.


Anybody have a lead on the new Ridge binding from Dynafit? It isn't the same as any other dynafit hole pattern

For those interested here is a Fischer Curv booster plate template.

https://tgr.scdn2.secure.raxcdn.com/...ayout_Tool.jpg
Attachment 505216

It currently is unconfirmed and any help confirming would be appreciated. I'll edit it and this post after confirmation. The binding layout tool is in prototype mode and will be offered up too.

Marker Duke PT Template.

Attachment 505694

Hey all. I looked around for quite a while, but cannot find a paper templates for Warden 11 MNC. Does anybody have one or a link to one?

Quote:

---

Originally Posted by AlpiNord

Marker Duke PT Template.

Attachment 505694

---

Thanks for this - used it yesterday and it is not only 100% accurate but super easy to use with all the reference measurements and detail.

Also for reference I dropped my pivot jig on top of my test mount and confirmed that there is no hole conflict at all between a Duke PT and a Pivot 15/18 mounted to the same BSL at the same ski mount point

Quote:

---

Originally Posted by SnowMachine

Hey all. I looked around for quite a while, but cannot find a paper templates for Warden 11 MNC. Does anybody have one or a link to one?

---

Is the 11 MNC hole pattern different than the Warden 11?

Quote:

---

Originally Posted by soul_skier

Thanks for this - used it yesterday and it is not only 100% accurate but super easy to use with all the reference measurements and detail.

Also for reference I dropped my pivot jig on top of my test mount and confirmed that there is no hole conflict at all between a Duke PT and a Pivot 15/18 mounted to the same BSL at the same ski mount point

---

You're welcome. Good to hear confirmations.

Quote:

---

Originally Posted by AlpiNord

Is the 11 MNC hole pattern different than the Warden 11?

---

It appears to be the same. A little tweaking for scale and I was able to get your template to measure correctly. This is a remount from Shifts. It looks like I can reuse two of the toe piece holes and no other interference.

I'll do a test mount this week.

Thank you!

Does anyone have a paper template for Tyrolia attack demo bindings?

thanks