can I charge extra for that?Quote:
Originally Posted by XXX-er
Printable View
can I charge extra for that?Quote:
Originally Posted by XXX-er
you probably could
my Gf moved straight there from england (where else does a brit move?) she said it was a shitty place for a kid to move there is nothing up there but a church and a country club ... no chinese grocery store to buy penny candy
In CO, some districts let you take standing dead on the FS permit. Great with all the 4-5 year old beetle kill out here. Straight off the splitter I can barely get the stuff in the stove without it catching fire in my hand.Quote:
Originally Posted by Zesty Not Spicy
In WA it has to be down, can't even take standing dead. Plus you only have a 50' window on either side of the road to harvest. But right now there is probably a couple hundred cords already cut and stacked just sitting on the side of the road.
gotta be down and dead in most NF's in CA
I get FS permits for green (standing) piñon and juniper here in NM, $10/cord.
kinda hard to squish yerself with a pinion or juniper
Yeah, it's win/win.
so now you can make shitloads of pesto and gin?
$5 / cord for deadfall and standing dead here (MT). Standing dead is significantly more fun. A few minor restrictions (no cedar, no larch in the winter, etc.). Picked up most of a cord yesterday; some larch and some crappy fir that was already down and easy to grab.
In Inyo National Forest, California, it is $14 a cord and it has to be on the ground. As far as I am concerned leaners count. I have been done cutting since May 4th and split by hand all summer. Between my neighbor and I we have 12 cords split and stacked.
Whoever took made that owl thing has ay too much time on their hands or too many mushrooms in the freezer. By the time stacking comes around all I want to do is be done.
In the Nicolet-Chequamegon National Forest it is $20 for 4 cords and you can take standing trees as long as they are dead and less than 18 inches DBH. I've cut 5 loads so far this fall with three being brought home. I need at least one more load. I've got a lot of oak, but have been finding more dead maple the last two years.
Attachment 125021
Cut, split with my Fiskars X27 axe, and stacked up-about 5 cords.
A lot of my neighbors use a hydraulic splitter, but I really enjoy splitting with an axe. It's great to do after a long day at work.
Bought myself a 3 1/2lb single bit with a clear grain hickory handle. $16.99. I'm fixin to get my moneys worth outta it.
Cut my last load of wood for the season. I tried an Oregon chain on my Stihl based on a recommendation. That will probably be the last time I do that. I was able to cut two links from a large oak before it started to significantly dull. I can cut two loads with a Stihl chain before it gets as dull as the Oregon chain did off of two cuts. Now it's time to split the wood. I got a head start on a few pieces that still had some moisture but now I'll be able focus on splitting.
I split a bit with an axe its fun to do stuff like ash and small maple but for the big stuff and birch but we have a badass splitter. 7-10 cords of hardwood per year. The splitter makes life easy(er)Quote:
Originally Posted by bovine
Grange - I've been running Oregon chain on my Husky w/ no noticeable difference
We've always used Oregon (Huskies)Quote:
Originally Posted by telemike
Dirty/muddy wood skidded during a wet summer will dull a chain very quickly.
That's the brand the person who recommended Oregon chains uses.Quote:
Originally Posted by telemike
What's your favorite splitting tool?
Mine is an 8lb. Splitting maul with a Fiberglass handle. I got tired of replacing hickory handles every two years, and the 6lb. mauls don't split like a heavy maul does.
I see a lot of people splitting wood with an axe, Axes are for chopping wood (cutting a log in two pieces), Mauls are for splitting rounds.
8lb. splitting maul with fiberglass handle for me as well.
Good question but this was discussed at great length last wood-splitting season:Quote:
Originally Posted by refried
http://www.tetongravity.com/forums/s...splitting-mags
that was last year, who wants to read old threads. you don't have to read this one if it bothers you having a new thread about woodsplitting.Quote:
Originally Posted by Mr. Multiglisse