2018-19 Praxis Skis Info and Resource Thread

Quote:

---

Originally Posted by Jtlange

FYI my experience is with the coloring on veneers is really positive. Blues and reds come out really well and blacks are really rich. The purple on these skis are also very deep. The seafoam type green really plays with the birdseye maple beautifully as well. Keith makes some amazing skis.

Also, any of you been on the EXPs? I'm 6'2" 225 and I cant seem to find a mid 80s touring ski that is above 180 cm except EXPs. How did everyone find the flex? I would assume a 3 would be perfect for those skis.

---

Line art is great on veneer - Ibex, Tsunami, etc.

Solid colors end up being a bit muted, but that's not necessarily a bad thing. For example, I much preferred the Max theme on my Qs (over photos of it on nylon), and the OG GPO graphic is great.

I usually tour in the 180 range, and love my 173 EXPs that I got from @grinch.

One common complaint with light, mid-80s skis is that they don't do Spring glop well. The EXPs exceeded my expectations - just drive the tip and they bust through.

The EXPs can bend a tight arc and hold an edge on harder snow. I know some folks prefer long radius skis for jump turns in couloirs. I can't comment about this or compare the two design approaches

I don't have a remote temptation to seek out a Zero G 85. I can't imagine a better ski than the EXP - different maybe, but not better, and I'm OK with the weight. If I were to do anything, I'd shave 150g by going from Plum Guides to some light ATKs.

My 173 EXPs (veneer, flex #3) come in at 1425g. I'm 5'9, 165#

I usually ski a flex 4 in Praxis.

... Thom

Quote:

---

Originally Posted by Jtlange

https://uploads.tapatalk-cdn.com/202...b650b89479.jpg

---

Wish this was a stock Praxis graphic option - these are sweet

Here is a good example of how things will "wash out". When we did this design the wash out was expected and planned for as we picked colors that would show the grain nicely while popping off the ski.

Attachment 325317Attachment 325318

I'm partial to having just the text from the "Redwood Surf" graphic printed on my veneer. I actually have that same graphic on both of my veneer topsheet Praxis'.

Quote:

---

Originally Posted by glademaster

I'm partial to having just the text from the "Redwood Surf" graphic printed on my veneer. I actually have that same graphic on both of my veneer topsheet Praxis'.

---

I did that on my big red Protests and I'd do it again.
Attachment 325321

Woah, what's going on with those? Did you have the printed woodgrain from the graphic printed on top of the veneer? Or if not, how did the text end up lighter? That's a very cool effect.

I discussed with Keith. No woodgrain, just transparent red on olive ash veneer and the logos.
Basically anything white in a graphic shows as transparent when he stains the veneer. So I told him I wanted the red to be transparent, and the logo to be clear so the wood grain showed through. Logo on one ski tip, another facing the other way on the other ski tail.
He nailed what I was picturing in my mind.

Ah, cool, so a transparent red die on the veneer with clear for the logos. Very unique looking. I really like it.

Those are unbelievable.

I dug up a photo of my departed Qs with veneer/Max. Seems as if I always end up selling my prettiest skis. Maybe there's a lesson here?

https://galibierdesign.com/images/ot...ote_Max_02.jpg

... Thom

Ive got that on nylon GPO’s. My favorite graphic


Sent from my iPhone using TGR Forums

I have been a slacker regarding touring this year, outside of nordic, but I am enjoying my switch from tele to A/T lately for spring corn tours. I still prefer tele for rolling terrain on the way in/out. The edges on my BCs were sharp enough to shave with I think, detuning continues. Flex 3, Enduro+C, maple veneer.

Attachment 325412

Quote:

---

Originally Posted by 3PinGrin

I have been a slacker regarding touring this year, outside of nordic, but I am enjoying my switch from tele to A/T lately for spring corn tours. I still prefer tele for rolling terrain on the way in/out. The edges on my BCs were sharp enough to shave with I think, detuning continues. Flex 3, MAP+C, maple veneer.

Attachment 325412

---

Nice!!!

What do those weigh as-shown?

Quote:

---

Originally Posted by N1CK.

Nice!!!

What do those weigh as-shown?

---

2148g / foot

Those BCs are sweet!

Quote:

---

Originally Posted by 3PinGrin

2148g / foot

---

190 cms?

I ordered the same for this year except in 180 (enduro, carbon, #3).

Quote:

---

Originally Posted by dschane

Those BCs are sweet!



190 cms?

I ordered the same for this year except in 180 (enduro, carbon, #3).

---

Whoops, should have noted that. 180cm Weight includes leashes for what it's worth.

Sent from my SAMSUNG-SM-G930A using Tapatalk

Quote:

---

Originally Posted by 3PinGrin

2148g / foot

---

So the BCs come in at about 1800?

I guess my hopes of an 1800g, #3, UL/Veneer (maybe carbon), 182 GPO are unrealistic, then.

That makes sense though, as my 182, MAP/Carbon #4 pair comes in at 2020.

It's probably for the best, with this Spring's cash flow ;-)

... Thom

Quote:

---

Originally Posted by galibier_numero_un

So the BCs come in at about 1800?

I guess my hopes of an 1800g, #3, UL/Veneer (maybe carbon), 182 GPO are unrealistic, then.

It's probably for the best, with this Spring's cash flow ;-)

... Thom

---

1787 on the nose for each ski.

Sent from my SAMSUNG-SM-G930A using Tapatalk

Quote:

---

Originally Posted by 3PinGrin

1787 on the nose for each ski.

Sent from my SAMSUNG-SM-G930A using Tapatalk

---

I'll bet they're sweet.

Quote:

---

Originally Posted by galibier_numero_un

I'll bet they're sweet.

---

They have been great so far in shallow dense powder and corn, pockets of powder here and there. And a total joy for climbing.

I got spoiled with the BCs being exactly the same weight. The MVP pair differed by a whopping 2 grams from each other, haha.

Sent from my SAMSUNG-SM-G930A using Tapatalk

Quote:

---

Originally Posted by galibier_numero_un

So the BCs come in at about 1800?

I guess my hopes of an 1800g, #3, UL/Veneer (maybe carbon), 182 GPO are unrealistic, then.

That makes sense though, as my 182, MAP/Carbon #4 pair comes in at 2020.

It's probably for the best, with this Spring's cash flow ;-)

... Thom

---

I asked Keith as I was considering the same ski (UL GPO). He said that his records of previous builds showed some 182 UL/veneer GPOs at 8lbs 1 oz.

Quote:

---

Originally Posted by galibier_numero_un

So the BCs come in at about 1800?

I guess my hopes of an 1800g, #3, UL/Veneer (maybe carbon), 182 GPO are unrealistic, then.

That makes sense though, as my 182, MAP/Carbon #4 pair comes in at 2020.

It's probably for the best, with this Spring's cash flow ;-)

... Thom

---

My UL 182 GPO nylon is 2235 each with MTN and brakes. 1865 for the skis alone.

I meant to say enduro core earlier (maple, ash, aspen) not MAP.

Sent from my SAMSUNG-SM-G930A using Tapatalk

Quote:

---

Originally Posted by steveski

I asked Keith as I was considering the same ski (UL GPO). He said that his records of previous builds showed some 182 UL/veneer GPOs at 8lbs 1 oz.

---

Quote:

---

Originally Posted by oetk2

My UL 182 GPO nylon is 2235 each with MTN and brakes. 1865 for the skis alone.

---

You did have to say that, didn't you ;-)

... Thom

Quote:

---

Originally Posted by 3PinGrin

1787 on the nose for each ski.

Sent from my SAMSUNG-SM-G930A using Tapatalk

---

Excellent.