http://www.slidewright.com/Bindings/Warden11_13.png[/IMG]
Printable View
http://www.slidewright.com/Bindings/Warden11_13.png[/IMG]
I just swapped some Look junior binders around and had to make templates. Luckily I had old mounts to make it easy.Quote:
Originally Posted by GeorgiaSnow
Made both the CompJ (Look/Rossi kids pattern that has been used forever) and the newer Kid4 binding that is mounted on the longer tracks.
I'l transfer these to Alpinord's template so we can finally get these to the masses!
Attachment 476407
http://www.slidewright.com/Bindings/Warden11_13.png[/IMG][/QUOTE]
Gracias. Link is very much appreciated.
Look / Rossi Comp Jr!
Attachment 476582
http://www.slidewright.com/Bindings/Templates/Look-Rossi%20CompJ_template.jpg[/IMG]
Niiiice, looks good. Heel/toe lines are within 2mm (with my setup the toe line can come 1mm back/closer to BSL and the heel can come 2mm forward/closer to BSL but that is just one data point...)Quote:
Originally Posted by Alpinord
With this mount I have 20mm of forward/smaller adjustment and 25mm of rearward/larger adjustment.
So maybe template can be tweaked to start off more centred in the range?
Edit to add: newer Comp Jr bindings have a longer heel track providing an additional 22mm of rearward adjustment.
Front of the adjustment range is same relative to the binding screws.
Now how do I setup the the newer Look 'Kid' binding on the base template?
It is essentially a demo binding so it is one mount pattern for all BSLs.
Could provide a distance to the center of the toe adjustment range relative to the rear toe holes AND the same for the heel adjustment range relative to the front holes. Between these two locations would be the BSL.Quote:
Originally Posted by gwat
Per next comment, what for what years is this template useful?
What years are the newer Comp Jr? The rear has 47mm adjustment range? So this template would move the holes 11mm further to be in the center of that range, correct?Quote:
Originally Posted by gwat
Boot sole center on the line between those settings on the toe & heel to locate the holes?Quote:
Originally Posted by gwat
Is an attack protector the same mount as a normal attack?
Looking for a solly STH13 template. quick search didn't find much.
Did you try the Attack template?Quote:
Originally Posted by carlh
Did you try the STH2 template?Quote:
Originally Posted by criscam
Hello, I am part of the team at Slatnar company. I help to develop our ski touring bindings. I would like to upload our paper template, but it seems there is too big file size. Can I send it.
It is possible to download it here:
https://docdro.id/wPgCePI
I'm looking at buying a pair of Spatulas that are mounted with some ancient Marker demos - wondering if that pattern is potentially the same as the Marker demos up to 2017-ish? Sounds like it changed for 2017/18?
https://www.tetongravity.com/forums/...7&d=1476175586
Anyone else notice the Look Axial/Pivot R2 template heels aren't correct for the Pivot heels or am I missing something?
http://www.slidewright.com/Bindings/Look/Look_pivot_300BSL.jpg[/IMG]
It is based on this template from Look:
https://tgr.scdn2.secure.raxcdn.com/...12-comparo.jpg
http://www.slidewright.com/Bindings/Tyrolia/Head_PRD12.jpg[/IMG]
Is there anu relationship to the Tyrolia Attack layout?
https://tgr.scdn2.secure.raxcdn.com/...yrolia_top.png
http://www.slidewright.com/Bindings/Warden11_13.png[/IMG][/QUOTE]
Can anyone confirm this Warden 11 Template also works for the MNC11?
https://www.slidewright.com/Bindings...Head_PRD12.jpg Is there any relationship to the https://www.tetongravity.com/forums/showthread.php/349430-Minimum-amp-Maximum-Boot-Sole-Lengths?p=6728731#post6728731"]Tyrolia Attack layout[/URL]? https://tgr.scdn2.secure.raxcdn.com/...yrolia_top.png[/QUOTE] Search Jong! Doh! I found gregorys thread: https://www.tetongravity.com/forums/showthread.php/304091-Tyrolia-Attack-13-Demo-paper-template?highlight=attack 13 demo"]Tyrolia Attack 13 Demo paper template[/URL]
[LIST] [*]It appears the Attack 13
Trying to help a buddy out who just got some Salomon Stage 10 bindings for his kid, I never saw these before, does anyone know if these are the same hole pattern as the Strive or any other existing bindings?
Also for myself, looking for a Duke PT confirmed template. See a lot of talk about a Jester Rear and a shifted Kingpin front, but as any brave soul actually put together an idiot proof Duke PT template in one place? Need for a 315 BSL
I’ve been looking for a Dynafit demo template for a while with no luck. I think it’s called the Radical Test, but it’s basically the Dynafit rotation ST with a demo toe plate. The toe plate is proving to be the issue. Any help?
Guessing this template will also work for current ATK FR 15s - correct?? New binders are in the mail and want to be ready when they arrive. TIAQuote:
Originally Posted by lucknau
I used it for the FR14. I think the FR15 has the same hole pattern, but definitely recommend doing a test mount first. Let me know if it works.Quote:
Originally Posted by GravityDT
:::::@:::::
Confirmed. This template also is spot on for the current FR 15's. Just mounted them up on the new Nocta's this am - just in time for the stormsQuote:
Originally Posted by GravityDT
Bump...Quote:
Originally Posted by Duffman
Oh awesome! Thank you!
For folks curiosity, I went ahead and compared hole patterns on the above before I saw Alpinord’s post.
The kingpin toe seems perfect. The Jester rear might be a mm short (or my print settings might be a mm off…I did check. It’s close. Anyway, I was going to say close enough if you don’t have a proper template but now we do!
Did not compare the BSL alignment, just the hole pattern.
Pics:
Attachment 482818
Attachment 482819
Sent from my iPhone using TGR Forums
Anyone have info on the strive hole pattern?
Same as STH2? Or Warden? Or both?
Strive 12&14 match warden 11Quote:
Originally Posted by telemarek
Strive 16 matches warden 13
(both toe patterns are the same but the heels are different between the two)
Thanks Dude!
Any info on this? I cannot get the Stage to match anything I've seen before.Quote:
Originally Posted by Duffman
This is second hand info, so confirm first, but according to my buddy it matched the Warden 11 hole pattern.Quote:
Originally Posted by ASmileyFace
Sent from my Pixel 7 using Tapatalk
I held it over my warden 11 jig yesterday and it didn't seem to work. The heel track matched, but the toe was different. I was busy with some other stuff so I didn't look into it more, and the guy picked his bindings up before I could double check.Quote:
Originally Posted by Duffman
Is this the right template for these old pivots?
Cant load the heal template. But spacing is a bit further between the screws than the new or old PIVOT heals. The toes look right. I mounted them without a template, but may re-mount and want the right toe template. Thanks.
Attachment 486990
Attachment 486993
Attachment 486991
Attachment 486992
Talked to my buddy he mounted his kids skis with the Warden 11 template. According to him it worked. Again second hand info so use w caution.Quote:
Originally Posted by ASmileyFace
http://www.slidewright.com/Bindings/Look/Pivot_vs%20older%20layout.png[/IMG]
https://tgr.scdn2.secure.raxcdn.com/...oe_Pattern.png
https://tgr.scdn2.secure.raxcdn.com/...el_pattern.png[/QUOTE]
Your 32mm distance between the 10mm and 12mm/19mm and the 8or 10mm/21mm looks correct on the toe for the older pivots. Is the turntable template same as the new pivots? Can't figure out which file that one is. Much appreciated. Love your centering template.
The blue is the current heel. The black is from the axial/pivot (not axial2/pivot) template you could not loadQuote:
Originally Posted by altabrig
Attachment 487104Quote:
Originally Posted by Alpinord
I assume the violet toe template is what I need to combine with the current heel template which must have not changed as my old heel fore aft bolt span is 32m. Or I can use the one you posted and goes with the closer rear marks, but I am nit sure which file that is. Pivot/Axial 2?
Pivot/axial2. I'll look for the template link and post it up. There are some discrepancies between Jons, Knuts & Rossi's templates. The proven Look Pivot Binding Mounting tool is based on the Rossi template:Quote:
Originally Posted by altabrig
https://www.slidewright.com/prodimag...Tool_large.jpg
Longshot.
Anyone know of a paper template for Marker TCX demo bindings? I looked in all the regular places with no luck.
If you strike out, check out this thread. Scan, trace or take images of the bottoms, along with some measurements and I can draw one up.Quote:
Originally Posted by Marshal Olson