Anyone have a resource for a beast 16 template? There's one for Stockholm reviews but I'm either MR or it's not scaled correctly.
Printable View
Anyone have a resource for a beast 16 template? There's one for Stockholm reviews but I'm either MR or it's not scaled correctly.
Thanks for reply, now everything is clear with these bars and I have another question:
If FKS/Pivot 14 are correctly adjusted for current boots/BSL is it normal that ski-brakes have some movement (very little lift up and down) when skier try to move boot/heel up and down (of course when foots with boots are set in bindings)?
Hello all I just purchased the Look SPX 12 fluid bindings. I am wondering if anyone knows if these match a template on here. I thought maybe the Look axial2, but not sure.
Also How difficult is the mounting process. I have never done it, but am looking to start mounting and waxing my own skis. I have worked as a carpenters hand for a few summers and am quite capable with tools. Just wondering if it's a task I can tackle or not worth risking my new skis and bindings? Any help or advise would be great!
Thanks in advance
They are the same than the new axial3. Which are different than the axial2, if I'm not mistaken.Quote:
Originally Posted by sdsimo3
I yet haven't mounted one of those myself, and I am not aware of an existing template
You should have no difficulties, then. Given the right choice of mounting beverage, that is.Quote:
Originally Posted by sdsimo3
This worked perfectly. Thanks Terry! I owe you beer/brown liquor:Quote:
Originally Posted by Alpinord
http://i108.photobucket.com/albums/n...pskmrqyzju.jpg
Good to know. I'll get down there for a beer one of these days. Nice color coordination. :wink:
Guys, If ski-master found that screws that mount bindings to skis (heel pieces in my case) not tighten enough (they were mounted 2 years ago in shop where I bought it) and he little tight it now it is right decision?
Can it damage the waterproof in holes/screws?
It is usual practice in ski-service to tight screws if found that they are not tight properly?
Do I need to check toe-pieces and also little tight it if it is possible?
Thanks in advance for replies!
This is probably already answered somewhere... but do the Speed Turn 2.0 and Speed Radical share the same heel hole pattern?
Specifically, I am trying to fit into a heelpiece drilled with inserts for Speed Radicals, can I use a Speed Turn 2.0 binding?
Struggling to find a mount template for the warden mnc demo. Anybody have a link?
I was looking for a sth2 wtr template today and found one on this page. http://www.slidewright.com/ski-bindi...to-powderguide I will mount it up tomorrow on a 2X4 to make sure before drilling my new skis.Quote:
Originally Posted by jondrums
Edit to add, this template did was waaaay short on the boot center measurement, so if you use it, mount to a 2X4 first to be sure you have it correct. I mean, I guess I could have fucked up, but I don't think so.
Thanks tBatt for the template. Just mounted a pair of Vipecs and it was spot on.
BTW, the template on Slidwright and Powderguide is not correct at this time. (3/25/2016).
The Radical 2.0 template worked great, thanks!Quote:
Originally Posted by Alpinord
I'm mounting up a new pair of dps 112 rpc with solly 900 and dalbello krypton pros. During the process I've noticed that the boot mark is @ 5 mm back from the measured center . I'm not sure if this is an error on dalbellos part or if for some esoteric reason they want me to use that point . If anyone has encountered this issue I would greatly appreciate any input
^^^^^^ Uh never mind .I folded the paper the wrong way:redface::redface::redface:
Anyone know where to find templates for a tyrolia attack 13 demo or a rossignol axial 3?
The template for the Rossi Axial 2 on the first page works fine for the Axial 3.Quote:
Originally Posted by handlebarsfsr
http://www.tetongravity.com/forums/s...24#post4544724
I'd be curious to know what is incorrect about the Vipec template, as I have had only positive feedback up to now and people verifying it.Quote:
Originally Posted by bfly
Thanks for helping to improve the templates further
Thanks. I had read conflicting information saying the heels were a different pattern.Quote:
Originally Posted by Meadow Skipper
The spacing on the holes were too close.Quote:
Originally Posted by Knut
I used Inkscape to overlay the two templates. You can see they are off when they are overlaid in the same document. I also printed out the template and did a test mount on a 2x4.
The red circles are the hole locations for the Powderguide template:
Attachment 179674
worked perfect.Quote:
Originally Posted by Alpinord
sorry for the delay.
Good to know. Thanks. We'll consider it vetted then.
I found an elan technical manual pdf online that had a part number for a paper template for the attack 13s. Does anyone have one of those that they can post or know how to order one?Quote:
Originally Posted by handlebarsfsr
anyone have a black diamond 01 template? i know one comes in the box but i'm mounting a used pair and can't find a template anywhere online. thanks.
I'm pretty sure that the 4-hole template from G3 will work for the front and back holes. If you have the 6 hole O1, and the 4 holes match (test it) then you can pencil-whip in the 2 middle holes.Quote:
Originally Posted by ski-wpk
http://cascadeclimbers.com/forum/ubb...mplates_AT_and
And I think there are templates in the 'G3 Learning Center' at www.genuineguidegear.com, but the website seems a little menstrual at the moment. Check later.
Thanks. The G3 template worked for BD01s. G3 holes are front and middle holes on BD01s. Back holes are 3cm back from middle.Quote:
Originally Posted by Meadow Skipper