Instead of me(new member) filtering thru the pages, does anyone have a link for an Atomic M10/L10 demo binding template?
Printable View
Instead of me(new member) filtering thru the pages, does anyone have a link for an Atomic M10/L10 demo binding template?
Anyone know of a template for Marker Free 200? The binding is really not new :)
Hi,
Does anyone here have these?
Many thanks
Dynafit Superlite 150/175 templates. Just a scan of the templates and a ruler for scale
https://drive.google.com/file/d/1xsm...ew?usp=sharing
Looking for a template for Look/Rossi/Dynastar NX7. I've searched with no luck. Wondering if it shares the PX pattern? thanks.
The Atomic Z12 has been around a long time, maybe something else works for it? it has the 3 point toe
I paid about $35 new and need to mount then on my Olin Mark VI SL Comps
Edit...found it in a Saloman template
Hey Folks - Wanted to add a dimensioned drawing I did for ATK template, as well as add a quick question.
Attachment 384471
The standard Tyrolia/Head template will work for the attack GW correct?
YepQuote:
Originally Posted by rfconroy
Do the Guardians share toe holes with any other bindings? I was hoping to swap between Wardens and Guardians with some inserts but it looks like they don’t share a toe mount.
Why? I have several pairs of already drilled skis. Wouldn’t mind the weight savings of ditching the Guardians for days I’m not planning on bringing skins (most days). Don’t want to move the mount point though because I like them where they are.
No. But download some templates and print them out. Something will work.Quote:
Originally Posted by TexasGortex
Is the Salomon template in the first post compatible with STH2 or only older STH/916 bindings?
That link is for the older STH/916 hole pattern.Quote:
Originally Posted by Pinned
Here's a link for the STH2/Warden template: https://drive.google.com/file/d/1maC...gb1PXF1e1/view
Thank you - ended up taking my own measurements off the binding last night which worked OK. This will be good to have in the future, saving it.Quote:
Originally Posted by skimaxpower
Does anyone have a template for Ski Trab? Specifically, Titan Vario.2. I've been looking everywhere and can't seem to find even a jig.
What hole pattern does Dynafit adjustment plate use ?
https://www.dynafit.com/en-us/adj-pl...-08-0000048786
Wow, this thread is amazing. Started in 2009 and 12 years later still going strong!
I hope someone can point me in the right direction: I bought a set of Marker FDT Junior (7.0) rental bindings off of Facebook Marketplace. I thought that would be a piece of cake to install, but they clearly want that job done by those with the drill jig, not the hobbyist enthusiast.
Per the manual in the box, I need the Marker W003H1T drill jig to drill holes per the FDT Junior Large hole pattern.
Anyone pretty please have the measurements for those? Or any suggestions on how to figure it out without the jig/hole pattern?
Many many thanks!
Hagenaer
[selfish request]
This thread needs a refresh.
Jondrums, in all his glory, hasn't been posting and hasn't updated the first post in a few years. Newer models are missing. Knut's google drive link is amazing, but also not complete. It would be disastrous if links went dead....
Some superstar should combine Jondrums links with Knot's google drive and the other linked templates....
TGR needs a new hero.
How about this, I think I got most of them:
https://docs.google.com/spreadsheets...Bh8/edit#gid=0
Anyone know what hole pattern the Dynafit adjustment plate use ?
https://www.dynafit.com/en-us/adj-pl...-08-0000048786
Nice! Thank you.Quote:
Originally Posted by cmor
Anyone have luck on the Marker Duke PT template, please. I am looking for one. Scanned the pages back a few years and dont see one.
Look NX 11? My kids bindings. Same as PX? PX 2? PX racing? Thanks
The easiest way to tell is to print the template you think that matches and drop the binding you're planning on mounting on it.
It should be pretty obvious, pretty quickly if the pattern is the same.
(That doesn't guarantee the toe/heel spacing is correct, but it's a good start. I suspect that it's rare for bindings to use the same pattern, but have a different heel-toe spacing - though I admit I have almost no evidence to support that suspicion.)
Toe was the same. Heel was not.Quote:
Originally Posted by jhyatt
Sadly have no printer so can not print a paper and compare but it "looks" like Jester/Griffon could be the same mount pattern as Kingpin 10/13?
Could anyone confirm how it is?
Hello, I am newbie here. I looked in the google drive that posted on here but I could not find a template for Tyrolia attack version 1 none demo. Could you point me to where I could get this paper template please? TIA
No you can't. Use the Tyrolia Head Alpine.
Thank you easr bear, and thank you all. I went back and read somewhere between page 40 - 50 and found the answer to use regular Tyrolia/Head alpine.Quote:
Originally Posted by east bear fr
not the same.Quote:
Originally Posted by LA-73
Right, not the same.
Does anyone have access to a look express (demo/rental) template? According to the manual i need a FCGF101 template which doesn't line up with the spx template i found on here and tried.
Anyone that has it is welcome to pipe up, but I'll just note that I don't recall seeing many/any demo templates other than mine the last few years. So, I don't expect anyone to come up with something you haven't already found.
As I noted in the other thread where you posted, it's possible to create a template, if you're willing to invest some time and effort. But it will require some investment on your part in time and follow-up. And it won't be instant.
Having someone measure a jig would probably be helpful/quicker for toe/heel spacing - though it's totally possible to do without that.
If you are on the fence about mounting your own freaking skis... Do it!
I bought that grey center finding tool on gear swap. Saves time and is more precise. Wish I had gotten it before.
I mounted these pivots and the forward pressure was spot on first try both skis. Of course it's so much easier with new skis and bindings.
I have probably mounted... 20 bindings now between my family and friends. Awesomehttps://uploads.tapatalk-cdn.com/202...17edfbae40.jpghttps://uploads.tapatalk-cdn.com/202...fc57037579.jpghttps://uploads.tapatalk-cdn.com/202...83590935ea.jpg
The NX10 mount pattern is the same as the Look PX/Axial 2. Just used that template to put NX10 on the wife's new Ripsticks. Can't say for sure that NX10 and NX11 are the same but it would be odd if they are not.Quote:
Originally Posted by jhyatt
Mag rfconroy has a 3D printer and made me a centering jig just like that one. If anybody else is looking for one, try PMing him to see if he's willing to do some more. Price was very fair. Can confirm that using that tool got me to the beer-drinking phase of mount your own fucking skis way faster.
Some quick visual observations on Knut’s MTN/Backland template from using it yesterday:
- lateral spacing between screws is bang on for both heels and toes
- toe fore/aft spacing between holes is about 1-1.5mm too short
- heel fore/aft spacing between holes is about 1-1.5mm too long
I punched from center of the bottom two screw marks on the toe and heel and then adjusted by a mm or so for the upper screws. That set the bindings up further apart which seemed to yield the most accurate BSL measurement
I personally wouldn’t fully trust this template for a race binding that had zero adjustability but totally adequate for something that adjusts a few mms especially if you’re willing to be observant and tweak your punches a little bit
Sent from my iPhone using Tapatalk
Took a look at the slidewright link for the sth2, im pretty sure its wrong: https://www.slidewright.com/powdergu...ing-templates/
The spacing fore aft on the slidewright link is 30mm, but to my eye its 31. I think these dimensions are reasonably close to the actual binding:
Attachment 396662
Anyone else encounter this? Appears the bindingfreedom template is correct, but the lines are so fat its impossible to get precise punches.
No. The shift has a five hole toe and I different hole patterns. And honestly if it was my first shift binding, have a tech set it up that knows how to do it or a mag from here so that if doesn’t eject you every 30 seconds. And if I was going to buy bindings for a 50/50 setup shift would be at the bottom of the list. Duke PT would be first and cast second. I’d find other models in between just to stay away from the shift. Have you read the endless pages of the shift thread? I have three duke pt sets of clamps all with zero problems from day one and they are bomber.
anyway. To answer your question, it’s no
Any paper templates for Armada Tracer? aka 22 Salomon MTN. The guys at the shop are convinced its a different jig than the the previous mtn's....
Update: found paper templates- still matches old MTN versions.
On the hunt for 'Look Team 4' mounting template for my lil dude
I've searched the webs and combed the thread with no luck. TIA
Tyrolia Attack 14 (not demo).
I've read this thread as carefully as humanly possible, and it seems like 2 years ago there was debate between the Binding Freedom and PowderGuide templates.
I located each thanks to this thread, but since they aren't timestamped with revision histories, does anyone know the status?
Which is the best to use?
I do plan on a test mount, but maybe yall have accumulated some know-how.
https://drive.google.com/file/d/1aL6...1UGWBh-94/view
https://docs.google.com/file/d/0B0Sn...CwUSdBzoR0pFFg
Based on a printout, they look the same to me.
On different subject, my household has this thing called a Criquit Maker. It's a nice tool which we own for complete bullshit crafting reasons.
It seems like this thing should have an application in mounting my own fukcing skis.
https://cricut.com/en_us/machines/cr...ker-3-cat.html
Does anyone have a templete for Atomic Shift 10, I see the 13s but not the 10, are they the same?