Printable View
Attachment 399228
out of molds and feels like a gummy
super tacky and kinda soft
going to let dry another day then toss in sugar/citric acid
will try a test dose later on and see how it goes
guesstimate is 5g gummy = 50mg dose
big squares are ~30g, small ones are ~5g
Wait, how do you "toss in" sugar/citrix acid to a semi-solid? Dusting them?
Thank you for your contributions to science
Appreciate the info TBS.
Having a degree in Forestry and a connoisseur of the green I’m doing some fun and long overdue reading lately.
Any recs on books? Probably in this thread but my stoner mind has not remembered so.
yep giving it the sour patch kid coatingQuote:
Originally Posted by TBS
Attachment 399337
results are in...
tastes like straight rso, the citric acid dusting covers it a little, but it is not candy, not even close
dosage seems accurate, 1g = 10mg, sampled 11g and seemed about what i was expecting
effects were solid, more head and less body than my choc, which makes sense due to material used being fresh frozen and not year old cured and degraded
it also felt like might be more bioavailable for my gut biome, seemed a little stronger than anticipated and came on faster, idk if difference in material or difference in pg vs cacao butter as carrier, both have lecithin added
need to get some samples out for testing by others i trust and adjust according to feedback, but worthy of a round 2 of development, although not sure it will replace choc for taste it is far easier to make (and cheaper)
A spoonful of sugar helps the medicine go down
:eek::eek::eek::eek::eek:Quote:
Originally Posted by forty
Makes complete sense to me.Quote:
Originally Posted by RockChalk
I know what to expect of say 100mg and if I’m testing this is the method of choice. Give me 10mg and I couldn’t tell you a damn thing for feedback data.
Edit: the 50 I ate a bit ago is also hitting as expected.
I salute your dedication to science. Thank you for your service.
Username checks out.Quote:
Originally Posted by Buzzworthy
Heh, my BS is in Forestry too.Quote:
Originally Posted by Buzzworthy
As far as books on growing, I’ve liked
https://images-na.ssl-images-amazon....4,203,200_.jpg
https://www.amazon.com/dp/1936807548?tag=uuid10-20
Or
https://images-na.ssl-images-amazon....4,203,200_.jpg
https://www.amazon.com/Cannabis-Grow...s%2C119&sr=8-1
I also peruse ICmag from time to time https://www.icmag.com/
Like any forum ya gotta sort out the shit, but I’ve found it helpful
That’s a solid first crack at gummies forty. Congrats
I wonder what would happen if you dissolved some sugar and citric acid and mixed it with your canna oil & gelatin.
A guy I used to ski with made a candy this way, except he used pectin to get a harder set.
We salute your dedication to science
Thanks man, good stuff, again.
Stumbled upon an old wax gram thingy with a few year old kief stuffings I had in the garage.
What can I do with it?
Candidate for US Senate in the Deep South smokes blunt in campaign ad.
https://www.nbcnews.com/politics/ele...ew-ad-n1287631
Attachment 401819
Sent from my iPad using TGR Forums
I'd vote for him...Quote:
Originally Posted by Harry
Weed is higher than alcohol. Synergy is highest.
https://www.masslive.com/cannabis/20...irst-time.html
It’s a wonderful world when
The government can take a big cut off the top
Most of the business overhead costs are not deductible for tax purposes
And
Good businesspeople can still make lots of money
Just completed a 1st run of Tincture. Processed out about 1 pint of a frightening green liquid that has the desired effect.
https://www.leafly.com/news/cannabis...hem-and-how-to
Chemistry can be fun.
Bump.
Went to my 1st weed store since full legalization. Buddies place that has been in business back when MMJ was the only choice.
Anyway, the showroom was pretty sterile, I gave him some shit that it looked like Ikea, all white with blonde wood trim and a well dressed budtender. Only thing missing was yoga music.
I just wanted to say I had bought legal at least once in my life so I was planning on getting a pre-rolled of a strain from last season with a back story. Last spring he gifted me 6 clones to start my season. I re-planted them and got them going and then got a sheepish message. "Hey dude can I come over and get some cuttings from one of those starts, the one I gave you was the only one I had". I returned the entire plant to him instead, 5 others was plenty.
I was curious how that particular strain turned out (Do-Si-Do). They were out of pre-rolls so I had to buy an 1/8th. Upon sampling the product last night, holy crap. What I grow is effective as in what I am used to and I haven't bought weed in 5-10 years since I started my own grows.
The store bought was 100 proof compared to my 3.2. That 1/8th should last a while.
^^^Uh yea, the do-si-do I’ve had is pretty potent
My favorite dispo has prerolls that test at 30%
https://www.leafly.com/dispensary-in...iant=972341321
Thanks for posting the link. I have a few questions. What was your ratio of weed to alcohol? I'm assuming you didn't do any evaporation? You used the oven method for decarb? That link didn't look like a link on my phone browser so it was hard to find their decard method. How'd you get it ground up fine enough? Did you oven dry and break it up in stages as you went through decarb? What alcohol did you use, actual 95% Everclear? I've never tried this before.Quote:
Originally Posted by Bunion 2020
Quote:
Originally Posted by riser3
allow me throw my unsolicited 2 cents in...
that article is a good starting point, but its incomplete in its science, and offers imo poor advice in a few places
for anyone making tincture i would consider the first step deciding its end use
do you want a sublingual, something to mix into drinks, something used for cooking, other?
this will point towards what type of carrier you want it in, and then what flavors you want in it, and what potency and effects you are looking for
all that will dictate how you decarb, what the extraction process will be, and how you process after extraction
the math for potency is easy
input thc (mg) / end product (g) = mg thc per g product
you can take into account extraction efficiency and losses due to processing, but its all basic math and just based of simple assumptions
evap of everclear is easy and perfectly safe if you arent an idiot, their lawyers made that advice not the chemist, but again it depends on desired final product
decarb on cookie sheet at 240 for 20-40min for desired effects, longer = more sleepy
ime grinding is worse than just breaking up loosely by hand, substantially more chlorophyll is extracted when ground, this will depend on starting material, but i do not advise grinding for tinctures if flavor is at all important and you arent doing a winterization or other post processing cleanup
everclear works great, ive used vodka and gin which both worked but less efficient and take longer so taste is far stronger
good luck, science is fun :smile:
im about out of gummies and have friends asking if more available so need to do another run soon
taste of RSO was quite strong last time due to processing method, debating how i want to go about it this time
may do bubble hash to glycerin tincture, may do everclear quick flower wash to evap and glycerin tincture, may do dry ice hash, may do winterization cleanup post processing, idk... need to think about it some more
picked up a 2nd small tent and new bling led :cool:, gonna try to get a veg/flower cycle system going, clones rooting now, once happy will flip big girl to flower and off we go
i love gardening
Thanks for the additions 40.Quote:
Originally Posted by riser3
I decarbed in my oven on a rimmed baking pan @ 210 for 1 hr covered in Al foil, ground to medium find using food processor, used a cheaper version of Everclear but 190 proof for my solvent and it sat in my freezer for 18 days getting shaken every couple of days and I let it come to room temps 2xs during the steeping process. I started with approx 4 oz of smaller flower and some leaf probably 90/10.
Biggest issue was extracting all the liquid from the solid material, I probably lost 3-5 oz of liquid and I am working on a spinner type extractor for next time. Sort of a spin cycle powered by an 18 V drill. Yield was such that it will be several months until I need to make another batch.
Next experiment is making chocolate drops from Cana-butter and Cacao powder.
Next question, what do you do with the leftover solids? How potent are they? Cue the opening scene of Cheech and Chong's Next Movie. ;)
@bunion, if you need a crash test dummy for product testing I will be out there next month [emoji3]
Sent from my iPhone using TGR Forums
I will have all sorts of things to try out on you. By then maybe some choco-drops:)
Tried calling you last Tuesday thinking you may be around but alas you were not.
@Riser, no idea about the leftover solids. I am still sitting on a fair amount of #2 flower so I tossed the remainder. It was probably pretty flammable.