The chainsaw thread...

I've had this discussion before. If you're pinned down, and leaking bad, and alone...You are in a bind if you can reach your compression bandage or not.

I forget all that's in there -- Izzy, Kerlix, maxipad, tongue depressors, tape, and some other shit. We're typically not pinned down by accurate depressed enemy fire, so it's usually OK to use your trauma kit and WFR or WEMT on the other guy. I'll replace all that shit for you, bro.

My vest already weighs 20 lbs if I have to hang a logger's tape on it. When clients and inspectors see a red & white first aid kit festooned with reflectotape, a man's name, and his blood group, they know we're the guys Strawberry gets the good shit from.

Quote:

---

Originally Posted by highangle

My survey crews only break out their saws when they have to. It increases their work, increases liability, and I make them tape their blowout kits to the backs of their helmets.

---

Yeah, they are survey crews, not land clearing crews.

Makes zero sense to cut a visual line with a saw unless you really need to.

I'm talking about thinning crews. 20 people running 10 saws cutting and stacking. It isn't efficient in terms of dollars or time to do it manually.

Agree that if you are pinned down, cut from a saw and alone, you are probably dead. Isreali compression bandage and a hemostatic (quickclot) bandage are what you want.

Shit I'm almost always sawing solo. What's a good place to get a emergency kit?

Grainger, or any industrial or forestry supply should have trauma kits. Military surplus stores too.
I know a hunting guide on the AkPen who carries a kit with morphine and fentanyl lollipops in case a pilgrim shoots him in the leg with a .375... He's also the pilot, so it'll be a long extract if he gets mangled.

Quote:

---

Originally Posted by steepconcrete

Shit I'm almost always sawing solo. What's a good place to get a emergency kit?

---

You can buy most of it on Amazon these days (Isreali Bandage, Hemostatic dressing, etc.) You could go down to REI in Eugene and buy most of it I bet.

We always had a trauma compression bandage (2), 4x4 pads (10), athletic tape, etc. You can make it much more complicated than it needs to be.

Remember, the goal here is to stop a bleed out and get to more advanced medical care. If you make it to big, you won't carry it.

Quote:

---

Originally Posted by highangle

Grainger, or any industrial or forestry supply should have trauma kits. Military surplus stores too.
I know a hunting guide on the AkPen who carries a kit with morphine and fentanyl lollipops in case a pilgrim shoots him in the leg with a .375... He's also the pilot, so it'll be a long extract if he gets mangled.

---

Funny...I know a guide in Southeast who's wife shot him in the leg with a .375. He was carrying a deer and she was following up carrying the rifle. She stumbled and fell and shot him in the leg. He was the skipper. They dealt with it and he got out alive but lost his leg from the knee down.

the compression bandage is all I carry in a pocket and we don't cut alone

the guy giving the saw safety course had a trailer load of stems on the ground out at his farm and so he walked us thru what it would take to cut a guy out of a pin with plunge and horizontal cuts which was definatley more fancy saw use than normal

used to recreate with a medical type who had out of date morphine, i always asked if he carried 1st aid and he would say ya man last aid too

Quote:

---

Originally Posted by ~mikey b

Funny...I know a guide in Southeast who's wife shot him in the leg with a .375. He was carrying a deer and she was following up carrying the rifle. She stumbled and fell and shot him in the leg. He was the skipper. They dealt with it and he got out alive but lost his leg from the knee down.

---

Musta hit him in the toe...

What did Mrs McComber do, tie him off and run down the hill to mayday from the boat radio?


I dropped a Browning rifle 20' out of a tree stand, and it landed on the butt pointed right up at me. It landed hard enough to break the stock of the BAR and cycle the bolt, but it never thought of firing with the Winchester type thru-bolt safety engaged. Hell yes there was a round in the chamber.


Was cutting overhead with a saw I just took the belly out of - clank. That was the chain hitting the top of my helmet after it fell off the bar. The chainbrake was the only thing that stopped it from tearing my ass up like a mountain lion before I could get out of the throttle.



.

Pretty much blew away everything just above the knee. And yeah, she bandaged him up ran down the hill and called mayday from the boat. Coast Guard saved him. She later died smashing her skull in off a rope swing.

ugh

Quote:

---

Originally Posted by ~mikey b

She later died smashing her skull in off a rope swing.

---

Carrying a rifle with a round chambered after the hunt is over and now this, she doesn't sound like she was the sharpest knife in the drawer.

Brown bear country. A round in the chamber is normal for some folks.

Quote:

---

Originally Posted by mecc69

Yeah, they are survey crews, not land clearing crews.

Makes zero sense to cut a visual line with a saw unless you really need to.

I'm talking about thinning crews. 20 people running 10 saws cutting and stacking. It isn't efficient in terms of dollars or time to do it manually.

Agree that if you are pinned down, cut from a saw and alone, you are probably dead. Isreali compression bandage and a hemostatic (quickclot) bandage are what you want.

---

My seismic survey contracts in the Ms, La, E.Tx salt dome country were all sounding down to the Permian...

Let me explain seismic surveying in that part of the world:

You need wide enough line for the drillers and doodlebuggers. "Source" line runs in a cardinal direction (true), let's say NS.
Source was on a 440' grid eg: an 80d galvanized nail was set to 0.02'hz every 440' along a source line so a crew of mostly stoned out working class kids of all races can come together to smoke, break big iron tools, and drill a hole 60' deep and hopefully straight down to plant some expensive and highly brisant explosive charges the boss knows about while hopefully leaving some "wores" connected and exposed on the surface for the "blasters" to set off with the grace of a Mozart conch-cherto.

"Receiver" line runs EW (true) and only needs to be about 6' wide, but it's on a 220' grid and highly highly decorated with vast and immense quantities of flagging tape. This is so the very lowest form of life in the American energy industry, doodlebuggers, can't possibly get lost trying to follow a straight line whilst trailing a cable the size of a garden hose and stopping every 220' to wonder where the "fuckawee". It never works. Geophones is hard.

So, now, with this "Grid" concept, you, as a seasoned professional, can see that when you get finished with a source line, you move over 440' and start another.
And when you get done with a reciever line, you move up 220' and begin another.
And so on.

You get paid by the point. The job is 500 square miles. You don't have to finish it all today, since it's hotter than six rats fuckin' in a wool sock out there, but they got another 500-mile job waiting on us if we finish this one on time, so...


Here's your and your crew's room keys. I had to buy the only hotel in Grand Chenier Louisiana to get them, so keepem someplace you won't losem.



.

Quote:

---

Originally Posted by ~mikey b

Brown bear country. A round in the chamber is normal for some folks.

---

Damn straight. Why carry an unholstered/unwrapped firearm otherwise?

10. Out of brown paper
.
.
.
6. .375 win mags don't fit in a holster too good
.
.
.
2. Q: Is there anything more worthless than an unloaded rifle in a case on a bear hunt? No. A burnt up saw makes a better boat anchor, and your son can design affordable women's shoes.
1.

Were you raising or lowering the rifle when you dropped it? If so, it should have been unloaded

https://uploads.tapatalk-cdn.com/201...abe4e2e88b.jpg

https://vimeo.com/81240461
Amazing rope and cable work too.

Cut first, then smoke crack.

Picked up my first ever Husky this week. 440 x-torque saw w a 16" bar for trail work and maintaining the mountain next to the 362. Man, I must say she is a hell of a saw! Light enough to scramble up and down the steeps all day but powerful enough to make short work of big tasks. Balance and ergos are surprisingly nice too.

May get a carbide chain for it since we cut so close to the ground all the time, but I must say, it is a perfect hiking saw!

Well I'm in the market for a chainsaw. I'm looking for a general purpose saw that'll be used around the farm when clearing brush and cutting saplings.

I know next to nothing about chainsaws and I haven't read very far through the tread. The local shop sells Stihl saws.

What chainsaw is right for me?

Quote:

---

Originally Posted by Kopi_Red

Well I'm in the market for a chainsaw. I'm looking for a general purpose saw that'll be used around the farm when clearing brush and cutting saplings.

I know next to nothing about chainsaws and I haven't read very far through the tread. The local shop sells Stihl saws.

What chainsaw is right for me?

---

MS 250

get the orange one

http://www.homedepot.com/p/Ryobi-14-...-204589654-_-N

Quote:

---

Originally Posted by NW_SKIER

MS 250

---

My first saw was a used Stihl 026. That shit's been fuckin' money ever since! Have even done trail clearing with it, where I would have to carry it a couple of miles. Big enough to get the tough jobs done, while being reasonably portable.