PMedQuote:
Originally Posted by trex_9
PMedQuote:
Originally Posted by trex_9
Lots of interest, thanks everyone. Getting back to all PM's this morning in the order I got them so some items might be gone before you inquired, but I'll let ya'll know regardless.
-Ryan
Couple items sold and some tire tickers on the rest. I can make a full set of 100 width brakes for the silver p14s if anyone wants em. Send a pm with your price.
Sent from my SM-G955U using Tapatalk
P14 silver heels and rear binding assembely sold. Thanks everyone for quick payments. Got some 14 silver toes left in great condition if anyone needs em. Happy to let them go cheap. Let me know!
Sent from my SM-G955U using Tapatalk
Hi everyone,
I lost one and broke another black plastic cap that covers the connection between the arms and the dildo. I've been asking around in shops and nobody seems to find a couple (or more). I even asked Look directly. Answer "ask in a shop".
I might be able to find a solution myself but, just in case I don't, would anyone have a couple of these?
See pic for reference...
Thanks a bunch!
Attachment 285481
Id love to find a set of AFDs for some 18s...
Sent from my SM-G973U using Tapatalk
old generation or new generation?Quote:
Originally Posted by japanada
They are the old race blue ones...last set i put on then were from some fluro orange era
Sent from my SM-G973U using Tapatalk
Replacement parts do not exist for your older blue ones, you would need to modify a new AFD to fit.Quote:
Originally Posted by japanada
For the Orange ones the Rossi/Look Part is #FC9F006.
And I'm not too sure how long these parts will be available, as they are replacing them with Part# FCIF010 which is Grip Walk compatible.
The difference between the original and new generation P18s is shown below.
Attachment 285700Attachment 285701
Yea i gave my last set of AFDs some dremel love. Think the new new ones are usable as well?Quote:
Originally Posted by Dee Hubbs
Sent from my SM-G973U using TGR Forums mobile app
Looking for FKS or pivot heels, any condition without slop when stepped-in is OK.
Looking to trade my 130 brakes from last year's (brand new never skied) P18 for 115s.
Total Look/Rossi binding JONG, been a Salomon guy forever, is there a thread about how to disassemble these?
Just google an image of Pivot replacement brakes and it will all make sense.
Thanks Doremite, stumbled on this looking
https://vimeo.com/4218404
Seems legit?
Anyone interested in trading my 130 baseplates for your 115s? They are in like-new condition, have only been skied a handful of times.
Before I start to bend/break my brakes, I have new narrow brakes, and will put these on either 91 or 100 waist skis. so 95 brakes.
I can trade or just purchase.
for P12if it matters
this the way to go?
Quote:
Originally Posted by Lexi-Bell
I'll be listing more soon.
Full sets or pieces or parts. Standing in line if its parts and pieces.Quote:
Originally Posted by iriponsnow
Consider me in line if it's full sets.Quote:
Originally Posted by iriponsnow
Once I get a few more pieces to make some replacement sets I'lI have the following for sale:
-WTR AFDs for P18s for sale and
-White P14 Dual/WTR with brand new 115mm base plates for sale.
pmQuote:
Originally Posted by toast2266
Single FKS toe available for sale, WTR version, DIN=12 at https://www.tetongravity.com/forums/...66#post5719466
That video is how I do it. The only steps within that process that are sometimes tricky for me are:Quote:
Originally Posted by jhyatt
- While bending arms in the vise, sometimes the arm breaks off. BUMMER! Solution: bend ridiculously super-duper-duper slowly and gently. Just waste more time going slow to guarantee you don't break an arm. (Or maybe it would help if I heated with torch before bending?)
- During reassembly, sometimes the layers of multiple circle parts "unsnap" and get out of position. Solution: just keep trying to "snap" those circle parts together, or manually hold them together perfectly in position until you get all the layers reassembled.
- Sometimes it takes forever to tap the spring back in. I'm like "WTF, why won't it go in? Should I quit?". Solution: don't quit, it always goes in eventually.
- After mounted, sometimes you need to fine-tune the bending, which you can do with boot snapped into binding, but try to brace the arm by using a monkey wrench or crescent wrench as a fulcrum to prevent cracking the plastic base of heel while you bend.
.
Have some px15 toes new afds, all in good shape, in BC Canada make an offer. Alternatively looking for some kinda heels to match, conveniently in BC of course
Sent from my BLU ADVANCE 4.0 L using TGR Forums mobile app
Sent you a pm.Quote:
Originally Posted by Skiwurrel
thanks. just followed that vid and did it all no problem. i still need to mount to finetune. they are not exactly symmetrical... but close. it was way easier than i thought it would be.
smaller diameter cheater bar, the better. i started with a seatpost but switched to a handlebar.
Quote:
Originally Posted by Vitamin I
Will post pics tomorrow but want to trade my 130 brakes for 100s.
I also have 3 out of 4 functioning pieces of the Green Look px 18. Heel connection bent. It's still salvageable if you want other parts off it. Willing to part with whatever pieces to help out.
Interested in your "parts" after seeing some photos. Thx.Quote:
Originally Posted by SkiNebraski
I'd be interested in the toes, or if anyone else has a set of 15/18 metal toes. I have an orphan set of heel pieces I'm trying to make a complete set from.Quote:
Originally Posted by SkiNebraski
Either you, or a buyer, could complete your pair pf green PX18 by making an offer on my single BLACK heel for PX18, from Post #1 of this thread.Quote:
Originally Posted by SkiNebraski
https://www.tetongravity.com/forums/...9&d=1531550048
I was really bummed to find both heel plates on my B130 Pivot 18's are cracked and need to be replaced (but glad I caught it now at least!). I didn't realize how common this issue is. Anybody got any spares?
Attachment 298747
Attachment 298748
Are they of the right age to be affected by the recall? Mine that cracked weren't. I'm also glad you caught it now. When mine let go, it resulted in a nasty faceplant at speed.Quote:
Originally Posted by Dshack89
Unfortunately I bought mine in Dec 2015, so they aren't in the recall window.Quote:
Originally Posted by snowaddict91
Will send you a PM, referring to this photo, asking if you want to replace only 1 of the 7-8 parts within each heel, by harvesting my parts. That way, you only replace the cracked metal piece. I have done this fix for many park skiers, but you can do it yourself in faraway SLC if you're handy and can follow my instructions.Quote:
Originally Posted by Dshack89
https://www.tetongravity.com/forums/...4&d=1571782165
Forgive me for not searching this thread better. But do you have any brakes still for sale? I have a pair of Rossi 120s that are OB slalom skis and would want to buy new brakes for modern sticks
Sent from my iPhone using TGR Forums
*on
Sent from my iPhone using TGR Forums
Are your Rossi 120s the type we call "FKS"? Post your photos.Quote:
Originally Posted by drop22
I have only narrow brakes for sale (like around 75mm?). You can try to bend your own narrow brakes wider, and if you succeed, then you're done. Else if you accidentally snap the arms off while bending, then you can buy more from me for a 2nd chance to bend again more carefully.
I will live near you at Squaw this winter, but tell me to bring the right parts before I move there. I won't bring my whole stash.
Other people here might have wide brakes to offer you. Tell them how wide you need (like 120mm? or what?)
Also, you can swap in a "brake arms" part into your whole heel---you don't need to replace the whole base of the heel.
.
I'm looking for a pair of metal toe pieces- P18, PX15, or FKS 155. If you have a pair you are interested in parting with let me know.
I also have 1 black 12 DIN WTR toe and 1 Forza 14 DIN GW/DIN toe if anyone needs them!
Looking for the plastic base plate for heels. Help
Sent from my iPhone using TGR Forums
Each FKS heel has about 6-7 parts in it. Which part(s) do you need, precisely? Take it to PM's, and we'll figure it out together.Quote:
Originally Posted by wizbang
I have parts in photo a few posts earlier, see https://www.tetongravity.com/forums/...30#post5788830
Also, I have many other parts not in that photo.
.