Tried to search, no luck. Anyone know if atk raider holes are the same as solly mtn holes??
Printable View
Tried to search, no luck. Anyone know if atk raider holes are the same as solly mtn holes??
There are so many variations of Raiders, when you take into account the back and forth renaming of the front brake version vs. the rear brake version, that it's difficult to be specific.Quote:
Originally Posted by Laps
What I can tell you is that I just went through the downloadable PDFs on the ATK site, and I established that my Raider 12s (this year's binding, rear brake) have the following spacing:
- Toe: 45mm w x 44m long (front to back)
- Heel: 45mm w x 60mm long
I have not done a test mount with this, so treat these as nominal dimensions (i.e. +/- a few tenths of a mm).
Note (see post upstream in this thread) that next year's Raiders will have a narrower mount pattern due to some patent issues with the wide footprint (go figure ... eh?)
... Thom
Ah...I see. Thanks for info, trying to find out if I could reuse a set of holes on a ski. I guess paper template match up would the way to go.
Thanks again!
Damn, Amer must be making these in the Kingpin factory. Have yet to see a jacked up ATK toepieceQuote:
Originally Posted by brutah
Not sure I understand this post.....Quote:
Originally Posted by brutah
Toe pin popped out (a la Kingpin).
But wait! I just realized it's a Salomon toe. WTF is he posting this here for???
... Thom
Ding ding ding!Quote:
Originally Posted by galibier_numero_un
Best source for spare U-springs in North America? Looking to stiffen up a pair of Trofeo/Helio 145.
Looks like Hagan and skimo.co.Quote:
Originally Posted by OrangeCSkier
Then, there's Telemark Pyrenees, Snowinn, etc, from across the pond.
... Thom
Any A-B comparisons between the atk FR 14 (w/freeride spacer) and Fristchi Vipec in terms of pure downhill ability?
Thinking of ripping my vipecs off my DWTs and replacing with FR14.
Quote:
Originally Posted by OrangeCSkier
The Hagan springs are for the race model, which have springs that are ever so slightly different than the Trofeo and BD equivalents.Quote:
Originally Posted by galibier_numero_un
You're going to loose elasticity in the binding going to fr14, maybe a touch more control over the tails due to the freeride spacer but at the cost of more vibrations. If you want something that skis better you don't have to redrill you could use a Tecton. They're only 50 g heavier than a vipecQuote:
Originally Posted by bigdeaner14
Anybody know the difference between the old M05 and the new M06 jig?
What bindings in the Raider / RT-line does the M05 cover, or are they the same?
M06 has support for the new Release/C-Raider toe.Quote:
Originally Posted by sf
M05 does not.
ThanksQuote:
Originally Posted by tgapp
M05 also can’t mount FR14 or R12.Quote:
Originally Posted by sf
Even more thanksQuote:
Originally Posted by CaliBrit
Never tryed Fritchi, but you could easily find A-B comparison between Kingpin and Vipec/Tecton on Blister.Quote:
Originally Posted by bigdeaner14
I went to FR14 directly from Kingpin, and in my opinion the power transfer of FR14 is near the same, maybe a bit better. I have Kingpins on Armada Kufo 108 and ATK FR14 on Kastle FX106 HP, and I really could go faster and push skis harder on Kastle with ATK then on Armada with Kingpins. Also, Kastle is stiffer and heavier than Armada (maybe it's a reason to ski faster), but I never had any issues with control in any hard conditions.
Probably have a pair of al06 risers available. Free plus passing on a favor. Too tall for my boot and not interested/have the time for modding. PM me.
Edit. It actually fits under my wife’s boot so I’ll keep it for now.
sent you a PM last night, happy to pay a reasonable price and shipping. thanksQuote:
Originally Posted by CaliBrit
not a tecton fanboi but you're going to be hard pressed to find an ATK binding that skis better. nothing to do with brand and everything to do with design. tecton has DIN toe with elasticity and an alpine heel. kinda apples to oranges.Quote:
Originally Posted by Mi_shok
Holy observation.
I noticed the bottom outer toe screws(4 total) for the atk fr 14 2.0 don’t sit like the others. Easily explained with pictures. It was my first time mounting bindings so I could have messed up all 4 bottom outer toe screws who knows.
Seems like an odd design choice from ATK. Anyone else notice this?
Attachment 358033
My life is better than your dreams
Whats the issue?Quote:
Originally Posted by GrantN
Did you Mount all eight toe screws to the ski?Quote:
Originally Posted by GrantN
Sent from my iPhone using Tapatalk
Sure looks like it. Mega safe!Quote:
Originally Posted by mtnwriter
My ski mounting is better than your dreams.