Attachment 345260
Attachment 345261
Attachment 345262
Attachment 345263
Printable View
that looks like something from the Grand Designs show.
Those curved beams are amazing, do you have any idea how they did that? Other than by applying copious amounts of funds, that is.
I would loft the lines like building a boat and do full scale layout.
Last time I did that was framing a groin vault ceiling in a church.
It looks like CLT, cross laminated timbers, which are an engineered wood product. So, likely a digital model for both engineering design and for driving a CAM device to cut each piece precisely, which are delivered to the site & erected. [likely quadrants are assembled offsite, whatever size fits on a truck & can be craned into place]Quote:
Originally Posted by dan_pdx
pretty nicely done without visible fasteners or plates
Looks like glulams, CLT is a sheet good, basically like giant plywood in sizes to about 8’x60’x 3 1/2”-12” thick
The framing contractor put his kids through college on that one.Quote:
Originally Posted by dan_pdx
The trouble with wow look at this stuff in a house is that after a couple of months when you stop paying attention to it you don't get the money back. Unless you entertain a lot of different people and the point is to impress them. If that's you then I guess it's worth it.
I am impressed though, although that couch doesn't look comfortable to nap on.
And the view sucks.
Either way, beams that size that are curved in two dimensions is pretty wild given the apparent precision of the end product.Quote:
Originally Posted by ctsmith
I went down the rabbit hole on this and found something fascinating. I was assuming that something like this would require enormous, very precise jigs, with one jig for each distinct beam shape, but apparently the guys linked below are making curved CLT just by manipulating the wood's moisture content before layup. Of course, I don't know if that was the process for the structure above, but it's pretty amazing that this is possible.
http://www.achimmenges.net/?p=21454
In timber construction, moisture typically causes problems with cracking and deformation; hence, moisture changes and stress development must be carefully controlled. In contrast, in this project wood is programed and arranged in a way to utilize this powerful, naturally occurring deformation to trigger a designed self-shaping behavior. In the same way that machines can be programmed to perform different movements, wood parts can be programmed to transform into predetermined shapes when dried.
Ha I've been in that section at EMPA. That is very cool stuff though, I'm a bit skeptical but maybe it works? Seems like it would have to be a low volume process.
That twist tower is pretty remarkable
Flipcore!Quote:
Originally Posted by dan_pdx
another CLT roof
maybe not as elegant in the detailing
https://static.dezeen.com/uploads/20...2364_col_3.jpg
I can't figure why someone would choose to spend that much money there. I mean, it looks cool. And?
The engineer that designed that said “of course I’ll stand behind my work, just not under it”.
Sent from my iPhone using Tapatalk
Maybe sound deadening? But there are cheaper ways to do that.Quote:
Originally Posted by ötzi
Cool trick shots when they switch to racquetball rules would be my guess.
to put it simply
Euros value design more than Americans
the Swiss in particular have a very strong aesthetic that holds craft to be more than just a commodity trade
(that project is in CH)
the architects website has a few picturesQuote:
Originally Posted by ::: :::
Attachment 345548
Attachment 345549
https://www.tetongravity.com/forums/...f-8e421a4aaa86
https://www.tetongravity.com/forums/...e-b4cfb8510347
that make it look like it was constructed at someone’s shop w/hand molds (does glu-lam = clt?) then dismantled and put in location. Eeesh though, an 11 year project? In Notting Hill, London? ££££££
I have to admit I didn’t look into it too much. Just found the images and read the short blurb
Pretty interesting if it was done by hand
I've spent a lot of money on design and craftsmanship and I value them highly. I still wouldn't build that. Maybe that's just me, that's okay.Quote:
Originally Posted by ::: :::
Definitely handwork. Both of those. A lot of steam bending in the first, a shitload of cutting and nailing (or however the cross pieces are attached) in the second. The second one at least would most likely be produced in panel form in a production environment so it would go faster.Quote:
Originally Posted by ::: :::
But you don't look up much while playing tennis.
I’m pro lob, I’d have a tough time operating on that court, a bit uh distractingly trippy
Sent from my iPhone using TGR Forums
Clearly the playgrounds of Big Waffle.
I was curious at went down a web rabbit hole. the people who did the roof are a big German firm - Zueblin (billions in revenue, do huge free form concrete stuff) so yer probably right it’s computerized. It’s for sale - £6 million. In, uh, less artsy photos the copper is a bit muchQuote:
Originally Posted by ::: :::
https://www.tetongravity.com/forums/...e-0c77968d1cc2https://www.zoopla.co.uk/new-homes/d...6bee89d6cc19ea