Probably should post in tech talk, but figured: "eh what the hell, these jabronis would know"
Anyone ever paint their Pivot 14s before? Does the plastic din window on the toes pop out and back in easily?
I tried giving it a wee bit of pressure, but was worried I was going to break it so I backed off.
searching for 95mm brake/turntable assembly, or heels w/ 95mm...or full bindings with GW toes
Anyone ever replaced Attack bindings with Pivot at same BSL? Was looking at doing that but want to avoid hole conflicts. Yes, I know I can download the templates but figured I would ask the Pivot experts first. Will have a few pairs hitting the market here soon.
rear pair of toe holes are pretty close, but not overlapping. I've done the swap in both directions with bad bbq skewers and good epoxy, still alive. In skis with quality cores though. I think the pivot pattern is inside the attack pattern, so moving it slightly forward just gives you 4 conflicts instead of 2Quote:
Originally Posted by phatty
Searching for a pair of white pivot 14s,15s, or 18s
95mm brake width preferably.
Located in Jackson but more than willing to pay shipping and then some
Searching for a complete set of 15s or 18s. Any color but forza...
Quote:
Originally Posted by rfconroy
Bumping this for knowledgeable mags before I kick it over to techtalk
There was a big how to thread about this last year on newschoolers, but I think they were painting pivot 18s. I'll try to find itQuote:
Originally Posted by rfconroy
Sent from my SM-G960U using TGR Forums mobile app
Download this file and hide/show layers in a pdf viewer to compare mount patterns. So easy.Quote:
Originally Posted by phatty
https://drive.google.com/file/d/1Zc7...usp=share_link
https://www.newschoolers.com/forum/t...om-Look-PivotsQuote:
Originally Posted by rfconroy
https://www.newschoolers.com/forum/t...-skis-tutorial
Sent from my SM-G960U using TGR Forums mobile app
You rock!Quote:
Originally Posted by jackattack
I powder coated some earlier this summer. Plastic the plastic part pops out. There's a little notch you can get a screwdriver in. For the back half of the binding to fully disassemble you need to drill out the rivets that hold onto the U shaped metal stand, then rebuild it out of 5mm steel rod. Bend it based on the old part, then instead of riveting it you can tap m4 threads on the end and use a nylock nuts. Make sure you paint it or powder coat it to keep it rust free. I masked off all of the internal faces and the din markings when I did mine. My compressor died on me so I haven't finished the other side yet, but I'd like to fix it up and get it done before the season kicks up. On assembly make sure to put grease on everything. I'm going to release test them again too once I'm done, but I never touched any of the mating surfaces or internal bits so I doubt powder coating had any effect.Quote:
Originally Posted by rfconroy
Edit: I used pivot 15s not 14s. Not sure how the toe piece on the 14 comes apart, but I'm guessing it's somewhat similar.
Stumbled across these and wish we had these as an option in the US. Can order them and looks to be a similar price as new here. Tried inserting the image but not working for me.
https://www.blue-tomato.com/en-US/pr...arid=304862639
Sent from my Pixel 7 Pro using Tapatalk
3 sets for sale. All have standard DIN AFDs.
Black P14s are in great shape. Have brand new 130mm brake ASSEMBLY. SOLD
White/Green P14s have a bit more use with a brand new 95mm brake assembly. SOLD
Purple P18s have most use and brakes bent to 115ish.
Asking $175 shipped each https://uploads.tapatalk-cdn.com/202...9f35b79038.jpg
I did not take this advice and holy hell that really hurt. Damn!Quote:
Originally Posted by SirVicSmasher
PM sent on green setQuote:
Originally Posted by phatty
Sent from my iPhone using TGR Forums
Bummer. I actually described it wrong. You can't get to the screws if the heel is not up...and you can't get to the screws if your fingers take the cheese and are in the trapQuote:
Originally Posted by Backward_Banana
Sent from my SM-G981U using Tapatalk
It made sense as soon as I got my fingers out of the trap. Next time they get mounted on a 2x4.Quote:
Originally Posted by SirVicSmasher
Attachment 434272
Anyone holding a complete set of Pivot 14's in the yellow/orange Forza 1.0 colorway? looking for a set to put on my skis for this year.
still looking to swap 130mm brakes (have) for 115mm (want)
Oh man, that’s definitely a rite of passage for mounting your own Pivots. You’re not cool until you’ve lost a fingernail. It got my thumbnail the first time I mounted them.Quote:
Originally Posted by Backward_Banana
What does it say about me that I've only caught my finger in a pair of PX heels?
I've swapped countless pairs of dildo brakes, the key is not to put your finger in the glory hole.
Keep your hands flat like you're giving a treat to a mouthy dog or horse.
Just throwing a post out to say: if anyone browsing this thread is looking to sell any 14, 15, or 18 pivots, send me a PM! Thanks
I need some heels to complete a CAST setup, preferably black or orange. Without turntables ok, but if they are included, I need 115mm brakes. DIN not terribly important. [emoji120]
Sent from my SM-G965U using Tapatalk
Looking to trade 115 brakes (have) for 95 (want)
Sent from my iPhone using TGR Forums
SOLD
I have some FKS 155 I am going to move on--$150 shipped in the continental US. They are in good condition, there are scrapes, scratches, nicks and chips from use, but they are 100% functional and all screws are included. 75mm brake width.
Still looking for a pair of black heels.
https://uploads.tapatalk-cdn.com/202...78e6bc76b1.jpg
https://uploads.tapatalk-cdn.com/202...5ad6b826c1.jpg
https://uploads.tapatalk-cdn.com/202...7a180e462d.jpg
Sent from my SM-G965U using Tapatalk
Looking for two pairs of Pivots with GW or WTR AFDs. 100mm brakes ideally - could be smaller for one pair as they will go on a GS ski.
Have a line on a pair but need smaller brakes so if someone has a pair of 100mm brakes they can sell, hmu.
Sent from my iPhone using TGR Forums
Looking for forza heels. 14 or 18 don’t care. Ideally 115 brake.
Sent from my iPhone using TGR Forums
I know it's been posted, but search sucks. Where can I pick up a metal half-moon?
bamboocoreONLY's shop: https://www.slopestyle-ski.com/acces...-moon-pid-9133Quote:
Originally Posted by phatty
Looking for 130 brakes, have pretty mint 115 to trade if interested.
Sent from my Pixel 7 Pro using Tapatalk
Quote:
Originally Posted by Robik
you two should talkQuote:
Originally Posted by rudy
Sent from my SM-G965U using Tapatalk
Thanks, just sent him a PM. Somehow it went under my radar.Quote:
Originally Posted by waveshello
Sent from my Pixel 7 Pro using Tapatalk
Pivot 12 dual WTR 95mm brakes $100 OBO
FKS 155 75mm brakes $120 OBO
See my main for sale thread here for links to photos and more details.
https://www.tetongravity.com/forums/...-clothing-sale
Prices shipped CONUS, shoot me a DM for more photos. All Alpine AFDs
Pivot 14s with 100mm brakes (snowbirds) $150 OBO. Good condition, normal cosmetic scratches. Missing one screw (see photo)
Currently mounted but happy to take off and ship:
FKS 12s with 120mm brakes (orange) $100 OBO. One FKS heel has a broken plastic baseplate (see photo) so replaced with an old Pivot 12 heel. Happy to throw in the extra P12 heel for a 5 piece set
These are on some 176cm RMU Professors (145-120-136) that are FS if anyone is interested
Pivot 10s with 90mm brakes (blue) $50 OBO. Someone tried to force 90mm brakes onto these old Anti Pistes and it sure didn't work. They've have barely been used as a result
K2 Anti Pistes also FS for cheap
Attachment 437115
Attachment 437117
Attachment 437116
Attachment 437114
Attachment 437113
I am in search of 95mm brakes. I have 130mm brakes to trade if anyone is willing to do the swap.
P18’s, silver, bent brakes to clear 97ish under foot, $175? Better pics to come.
Attachment 437231
Sent from my iPhone using TGR Forums
Looks like they are out of stock. Any other options for half moons?Quote:
Originally Posted by connersw
Anyone have or know where to get one, or a set, of older AFDs? I'm Vancouver for shipping/pickup.
Attachment 437773
Would this Pivot fit the Devastator 98mm wide?Quote:
Originally Posted by TrueNorth