Probably not as sweet as this one, I bet.Quote:
Originally Posted by Tyrone Shoelaces
That's a jet. Took me a couple of days, off and on, but it was so worth it. Put your eye out if you're not careful.
Printable View
Probably not as sweet as this one, I bet.Quote:
Originally Posted by Tyrone Shoelaces
That's a jet. Took me a couple of days, off and on, but it was so worth it. Put your eye out if you're not careful.
http://www.tetongravity.com/forums/a...1&d=1187913376
for the mini-animal
still have to add monkey bars
In middle school, my dad helped me build a miniature guillotine (I did most of the work myself). I wish I had a photo of it, that thing was cool! Blade was sharp too. It cut carrots, but did not completely sever the barbie's head I tried to chop off...the plastic was too hard for the blade to cut all the way through I think.
I also designed and hand-sewed the beautiful period velvet dress and feathered hat the barbie doll victim was wearing. It was a very pretty ensemble if I do say so myself.
Oh, and last year I built a ski chair out of old skis (with a 'lil help). There is a photo floating around of it but I'm too lazy to find it.
Sprite
I built this raised sleeping deck for my Tundra. It mostly just hides valuables like skis.
http://www.jacobsonmachine.com/photos/sleeping_deck.jpg
I'm gonna edit this after I build my new airplane instrument panel this winter.
thats tight bio ... i built one like that with drawers for my cruiser
a little smoke shack dubbed "red fox"
http://weknowsnow.com/blog/images/0821071.jpg
http://weknowsnow.com/blog/images/0821072.jpg
http://weknowsnow.com/blog/images/0821073.jpg
Do you mean Redd Foxx?Quote:
Originally Posted by jonpierre
BTW.. way cool shack
pendants my dear, pendants. so tempting, so tempting..Quote:
Originally Posted by snowsprite
Dining room hutch
http://www.roguesnowboards.com/photos/hutch.jpg
Kayak
http://www.roguesnowboards.com/photos/yak.jpg
really nice on both knuckledragger. The boat is gorgeous.
Thanks - the boat is a lot of fun.
Wow! That kayak is crazy-beautiful! Huge kudos to you on that labor of love...
Sprite
Sweet, Sweet, Boat!
It looks like you found one of the fabled Ents of Middle Earth, gutted him, and dressed him up as a shipping pallet. Tight.Quote:
Originally Posted by jonpierre
I laugh at anything named "Redd Fox" as a rule.
Twas a sincere question. Really. Only a few us would know where that's coming from...ya had to be there. But then, you'd have to be an old fuck.Quote:
Originally Posted by bio-smear
I built this Bumper (and the Land Cruiser) with my own 2 hands. At some point I've had a wrench on pretty much every single nut and bolt on the truck.
http://photos.gunzenbombzpyrotechnic...0049.sized.jpg
And this is my most recent engine project on my 4Runner.
3.SLOW rebuild (which I am kicking myself for).
http://photos.gunzenbombzpyrotechnic..._005.sized.jpg
Here is my most useful thing I have built to date. Bought the tub only( no outer shell) during a beer break at the local ski hill for my birthday. "my Buddy" said it was only a couple of years old....after repairing leaks and changing jets etc. and three new saws later, I now have a nice little tub that I use almost everday...sweet!
http://i144.photobucket.com/albums/r...1/DCP_0764.jpg
http://i144.photobucket.com/albums/r...1/DCP_0763.jpg
http://i144.photobucket.com/albums/r...1/DCP_0705.jpg
i have made jewelry. I used to make a lot because i worked as a receptionist and i had nothing to do but answer the phone, so i would bring boxes of beads to work with me and thread away. that really was the worst job ever--being on display out in the front as everyone walks by busily doing work things and gawking at you. i felt kind of silly making bead necklaces, but the alternative was to just sit there and do nothing. i really dont make jewelry anymore, which is good because the jewelry would usually self destruct after frequent wearing.
Well, okay.Quote:
Originally Posted by str8line
It's a Pontiac V8. Wish it was aluminum, but alas, only the timing cover and water pump are aluminum. Aluminum heads and blocks are now being produced for Pontiacs but they're way too expensive for me right now, I'd rather spend the money on skiing.
I was working at an automotive machine shop when I built this, so had access to all of the right equipment and did most of the machine work myself.
Heads are '67 400 2-bbl castings with big valves. Ported and flowed by a well-known Pontiac engine builder and racer in Canada. I polished the chambers and installed Ferrea racing valves, longer than stock to accomodate taller springs for the roller cam:
http://i114.photobucket.com/albums/n...s/POLISHED.jpg
The block is a 1970 455 block, bored +.035", all surfaces decked square to the crank centerline. Honed with torque plates, all bores verified to have no taper and all were within .0002" of each other in size and out-of-round.
Crank is a 1969 428 unit, 4" stroke. Final displacement with this combo was 440 ci.
Eagle forged steel 6.8" rods, Ross custom pistons, Clevite bearings, yadda yadda yadda.
Cam is a small solid roller, rocker arms are Harland Sharp 1.72 ratio. I started small with the cam and the engine really needed and wanted more.
Carb was a custom modified 800 cfm Quadrajet, distributor was a factory HEI, gutted and used to trigger a Crane HI-6 capacitive discharge ignition with sequential rev limiter.
I put it in this:
http://i114.photobucket.com/albums/n...s/PSFRONTH.jpg
Which I also rebuilt, every nut and bolt on the entire car. At one point it was down to this:
http://i114.photobucket.com/albums/n...s/CLEANING.jpg
Suspension is modified for handling. Did very well at the autocross with it, but needed better wheels and tires to really get the most out of it. Only the smallest, lightest, or most heavily modified cars with experienced drivers were faster.
Also drag raced it a fair amount. Heavy car (3840 lbs with me in it) with tall freeway gears still went 12.60s @ 108 MPH on street tires. More cam, better intake manifold and larger exhaust would've put it in the bottom 12s or high 11s. Amazingly stable at high speeds, too. Got it up to it's max speed (6000 RPM redline, 27" tire diameter, 3.23 gearing, ~3% trans slip) - about 145 MPH on the freeway late at night.
Super Nasty!!
Nice ride Willie
That is some high quality redneck shit there, boy-o. Hells yeah, [sic]. :fm:
It wasn't me but its amazing: http://www.milkandcookies.com/link/66611/detail/
Thanks fellas. Still have the car but the transmission caused the thrust bearing in the engine to fail so it just sits, waiting 'til I get far enough along in my new career to have enough money to go back through the engine and then get the bodywork and paint done at which point it'll be like new again. That was my dad's car and I grew up pushing my bike past it in the garage. He sold it to me when I was a senior in high school in '86 and I got laid for the first time in the back seat, so there's some sentimental value attached to it. I just hope I can get it done before my dad passes away as it was one of his favorite cars too.
I think this calls for a paper airplane build-off.Quote:
Originally Posted by David Witherspoon
Heres my entry:
Bow chika bow wowQuote:
Originally Posted by bio-smear
Been working on this little project with my crew the last few weeks. Finished the log work a couple hours ago. 75' of puncheon (log boardwalk) on the Lake Charles Trail out of Eagle. Decking is treated lumber we hauled up with stock and by hand. Everything else is native material, and all work was done with primitive tools - cross-cut saws, axes, carpenter's adzes, etc. There are some 24-30" trees under the decking we dropped with the cross-cuts and hewed with axes and adzes. Here's the alomost-finished product. Still needs some rock work at the approaches.
http://www.biglines.com/photosv2/200...ines_78155.jpg
I'll post up some more showing the whole process later. Right now I need a beer and a shower.
21,000 square foot gym a Colby-Sawyer college. Even did the game-lines and lettering
http://www.colby-sawyer.edu/assets/gif/floor13.gif
NICE WORK!Quote:
Originally Posted by Crock
After many hours of this
http://i3.photobucket.com/albums/y72...r/PB150016.jpg
http://i3.photobucket.com/albums/y72...r/PB150009.jpg
It eventually looks like this.
http://i3.photobucket.com/albums/y72...demandjeff.jpg
Built everything but the engine, shocks, and bearings ourselves.
this is last years car, were rebuilding it this year. 10th/101 in the SAE West rapid city race
the team
EDIT: Ok, this pic looks small on the team site. Since i dont have access to it, this time its not my fault
http://www.uvm.edu/~minibaja/badlands%20team.JPG
at the RIT race
http://lh4.google.com/mcmurr/RnSdERE...JPG?imgmax=800
That is absolutely stunning! How long did that take? Did you have previous experience building wooden boats?Quote:
Originally Posted by KnuckleDragger
I bet you launch it really carefully and never beach it for fear of scratching the finish!:wink:
http://i74.photobucket.com/albums/i2...h/_8162977.jpg
because of rontele's ancestors...
http://i74.photobucket.com/albums/i2...h/_8162973.jpg
beer Pong table
http://i74.photobucket.com/albums/i2...s/_5021899.jpg
http://i74.photobucket.com/albums/i2...s/_5162168.jpg
Here's the house I remodeled while living in it
Before
http://tetongravity.com/forums/attac...1&d=1188825971
After
http://tetongravity.com/forums/attac...1&d=1188825971
Handmade wooden kayaks are BEAUTIFUL...and can be incredibly light.Quote:
Originally Posted by KnuckleDragger
I used to be a deckhand on a ferry boat that went to Isle Royale, and we took lots of kayaks over. Part of the job was loading these kayaks on the top deck by hand, which was generally a bitch. There was one guy who had a handmade wooden kayak, and I swear it's the lightest thing of that size that I ever lifted. He said he made a couple a year, and he acted as if they were relatively disposable.
dobish: props on the best beerpong table ive seen in a while
This is spectacular. Holy shit. How much experience do you have doing stuff like this?Quote:
Originally Posted by KnuckleDragger
the Adirondack guideboat isn't made of hockey sticks....
Agreed, very beautiful & incredibly light and can be very sturdy. My brother built a cedar strip kayak with a fiberglass/epoxy coating that survived a 200 day, 9300 km river/lake expedition. It's light enough to easily carry with one hand so it made portages a breeze.Quote:
Originally Posted by focus
http://www.angelfire.com/on/kayakcan...ages/kayak.gif
http://www.angelfire.com/on/kayakcan...s/August27.jpg
http://www.tetongravity.com/forums/a...4&d=1188927347
That chainguard is sick, I want one!:yourock:
I am working on a project for longtime good friends (as in, I lived with her all through college and I have been good friends with him since they started dating). When they bought this house, the living room was divided by a wall from the kitchen/dining area. This was the first order of business. We knocked down the wall and I cut a couple timberframe bents to replace it. I think they work well with the existing 3x10 ceiling joists and t&g ceiling.
I also installed the prefinished 3/4" solid maple flooring. I am pretty jealous of their house now, the space has an awesome feel, sort of like a western loft type of thing.
Next up is the guest shower (going to waterproof (Kerdi) the walls tonight). Their previous house is under contract and when that is done we are going to do a new master bath and the new cabinets will be ordered. We still need to do a bunch of trim (obviously) and they need to pick out some stone/tile for the areas near the doors and in front of the woodstove.
http://farm3.static.flickr.com/2354/...577a6e53_o.jpg
http://farm3.static.flickr.com/2338/...a68c798e_o.jpg
http://farm3.static.flickr.com/2009/...0ccc3b87_o.jpg
http://farm3.static.flickr.com/2101/...74a796e4_o.jpg