Dynafit Ridge boots (and bindings)

Marketing rehash from BSC

https://www.backcountryskiingcanada....o4pDIWH0LhEIDI

SPECS
Price: $899.95US
Sizes: 25 – 31.5 (mens) / 23 – 27.5 (womens)
Flex 120 (men) / 110 (women)
Weight: 1,250g /
Last: 101mm
Materials: Grilamid or Grilamid with carbon fibre

Quote:

---

Originally Posted by Lindahl

I like the idea of the sliding tongue. The old Backland and TLT6 with removeable tongues ski a lot stronger than the more recent 1kg boots. This would hopefully bring that power back without the hassle of swapping tongues. Curious if it walks nearly as good as those boots with tongue removed. Looks like one step up in burliness though which isn't really what I want in this kind of boot.

---

That was the first thing I thought too, with new materials perhaps making the skiability a bit better as well. The massive difference is the last of the TLT6 if what skimo comments and others in this thread said. Part of what made that boot - and the 5- ski so well was the fit, which has yet to replicated. Such a bummer, because this boot - even with the last of the Halloween color tlt6p - would be fucking amazing. I’m being selfish tho, as I see radical pros CONSTANTLY around my hill so they must be working. Way more common than Vulcans ever were.

Quote:

---

Originally Posted by GoldenBC

I tried on Hojis 25 Vulcan proto that was made out of the tlt5. It fit me like a glove and now all their boots fit awkwardly. He doesn’t have a super narrow forefoot but he’s also adamant about not needing much support ahead of the mid foot.

I got to try on the ridge in two sizes too big. Hard to say much but the mid foot felt tight (like a Lange) and the forefoot was a lot bigger.

---

I agree with hoji, i like roomy your boxes and it doesn't affect my skiing at all

Sent from my moto g 5G using Tapatalk

I pre-purchased Ridges, picked them up yesterday. Like every boot I've had for 15+ years I replaced the liners off the bat with Intuitions. This is because I have a very low volume foot and with every boot AT boot I need to take up more volume (plus I think most touring liners are inferior to Intuitions, but I havent actually used any in a while). So I put the 12mm Intuition Tour Tongues in them. This definitely reduced the touring range of motion, but I think once the liners break in a bit it will get better. As previously stated the shells are short for a given length. I typically downsize and stretch boots out to fit. I wear size 10 shoes, I've been in size 25 Zero Gs (with lots of stretches/punches) for 4.5 seasons. Volume wise I'm sure a 25 Ridge would be better but I don't think I could get the length to work, and 25s don't exist right now to even try on so I'm in a 26 Ridge. The heel is bigger than my Zero G, but smaller than the Atomic Backland XTD in my opinion, or maybe about the same. I had one of those at home for a while and kept trying to decide if I could make it work. The biggest issue with the backland for me was the lack of any buckle around the ankle. For me the Z buckle was worthless, does nothing to pull my foot back into the heel pocket. The middle buckle on the Ridge is key. Same with the Skorpius. Nothing to hold my heel down, the BOA is worthless for me. I also found the heel/ankle on the Skorpius to be huge. Bigger than the Ridge if I remember correctly. Yes, both the Skorpius and Backland XTD have more and lower friction touring ROM, especially with the liner I put in. The Ridge Is much stiffer than either of those, which for me is a good thing. The Skorpius cuff is way too low for my taste, I didn't like skiing them at all (I know plenty of people love them, I wish I did!) Ridge cuff is about the same as my Zero Gs, a bit lower in the back. Ridge stiffness does feel a bit like a brick wall, at least in carpet testing. Tour to ski transition in Ridge very fast and efficient.

I dont think Skorpius and Ridge are really comparable boots, Ridge is much stiffer. Ridge also a bit stiffer than XTD at lower weight.

Quote:

---

Originally Posted by wilcox510

I dont think Skorpius and Ridge are really comparable boots, Ridge is much stiffer. Ridge also a bit stiffer than XTD at lower weight.

---

I hope the Ridge works out well for you! I think cuff heights vary wildly between sizes in touring boots. Often times companies use the same cuff for different sizes, so a 25 and 26 would use the same cuff, and it would feel short in a 26. My 27 Skorpius have similar cuff height to my 27 Hawx.

Quote:

---

Originally Posted by Benneke10

I hope the Ridge works out well for you! I think cuff heights vary wildly between sizes in touring boots. Often times companies use the same cuff for different sizes, so a 25 and 26 would use the same cuff, and it would feel short in a 26. My 27 Skorpius have similar cuff height to my 27 Hawx.

---

Interesting.. The Skorpius I tried had a cuff that was like 1.5 inches lower than my Zero Gs..

Thanks, I hope they work for me too!! Ha..

Interesting you were able to get a 26...i didnt think they were shipped to the US yet

Quote:

---

Originally Posted by nyskirat

Interesting you were able to get a 26...i didnt think they were shipped to the US yet

---

I might have a pair of 26.5 I’d be interested in selling


Sent from my iPhone using TGR Forums

Quote:

---

Originally Posted by JKlompus

I might have a pair of 26.5 I’d be interested in selling


Sent from my iPhone using TGR Forums

---

Already have a pair pre-ordered - let me see if I can cancel. I assume they're unused?

Quote:

---

Originally Posted by Andyski

That was the first thing I thought too, with new materials perhaps making the skiability a bit better as well. The massive difference is the last of the TLT6 if what skimo comments and others in this thread said. Part of what made that boot - and the 5- ski so well was the fit, which has yet to replicated. Such a bummer, because this boot - even with the last of the Halloween color tlt6p - would be fucking amazing. I’m being selfish tho, as I see radical pros CONSTANTLY around my hill so they must be working. Way more common than Vulcans ever were.

---

To be fair, that same last made it impossible for people like me to fit in it. I gave up after punching to its limit and still having significant pain in the midfoot and heel because it was just too narrow still. I don't blame Dynafit for wanting to expand the market for the boot. Lets face it, not everyone with a super narrow foot will refuse to buy the mid-lasted boot. But everyone with a wide foot will refuse to buy the narrow-lasted boot.

Good vid here-
https://m.youtube.com/watch?v=VOUrxU...ByaWRnZQ%3D%3D

Quote:

---

Originally Posted by Lindahl

To be fair, that same last made it impossible for people like me to fit in it. I gave up after punching to its limit and still having significant pain in the midfoot and heel because it was just too narrow still. I don't blame Dynafit for wanting to expand the market for the boot. Lets face it, not everyone with a super narrow foot will refuse to buy the mid-lasted boot. But everyone with a wide foot will refuse to buy the narrow-lasted boot.

---

[emoji817]. But like those lamenting the death of the 2500g, 30m radius, cambered charger (HL aside), I like to whine in the face of obvious business logic.

Instead of trying to fit in a sexy new boot which looked really cool but didnt remotely fit my foot I went with a boot that fit out of the box, fortunately it was the Mercury & Vulcan on which I did some big tours with no mods except a pwrwrap

the Ridge looks cool, i trust Hoji to make something incredible, what I don't trust is Dynafit bringing it to market as Hoji gave it to them,

but I sure hope I'm wrong

You can see his proto version here - https://www.youtube.com/watch?v=Ps5EIBoCFKE

Quote:

---

Originally Posted by wilcox510

I pre-purchased Ridges, picked them up yesterday. Like every boot I've had for 15+ years I replaced the liners off the bat with Intuitions. This is because I have a very low volume foot and with every boot AT boot I need to take up more volume (plus I think most touring liners are inferior to Intuitions, but I havent actually used any in a while). So I put the 12mm Intuition Tour Tongues in them. This definitely reduced the touring range of motion, but I think once the liners break in a bit it will get better. As previously stated the shells are short for a given length. I typically downsize and stretch boots out to fit. I wear size 10 shoes, I've been in size 25 Zero Gs (with lots of stretches/punches) for 4.5 seasons. Volume wise I'm sure a 25 Ridge would be better but I don't think I could get the length to work, and 25s don't exist right now to even try on so I'm in a 26 Ridge. The heel is bigger than my Zero G, but smaller than the Atomic Backland XTD in my opinion, or maybe about the same. I had one of those at home for a while and kept trying to decide if I could make it work. The biggest issue with the backland for me was the lack of any buckle around the ankle. For me the Z buckle was worthless, does nothing to pull my foot back into the heel pocket. The middle buckle on the Ridge is key. Same with the Skorpius. Nothing to hold my heel down, the BOA is worthless for me. I also found the heel/ankle on the Skorpius to be huge. Bigger than the Ridge if I remember correctly. Yes, both the Skorpius and Backland XTD have more and lower friction touring ROM, especially with the liner I put in. The Ridge Is much stiffer than either of those, which for me is a good thing. The Skorpius cuff is way too low for my taste, I didn't like skiing them at all (I know plenty of people love them, I wish I did!) Ridge cuff is about the same as my Zero Gs, a bit lower in the back. Ridge stiffness does feel a bit like a brick wall, at least in carpet testing. Tour to ski transition in Ridge very fast and efficient.

I dont think Skorpius and Ridge are really comparable boots, Ridge is much stiffer. Ridge also a bit stiffer than XTD at lower weight.

---

The fit notes are great, thanks! And love the comparison to the Skorpius and Backland XTD. All super helpful.

Can you speak to how well the Ridge walks and flexes compared to the ZeroG?

From trying the Ridge on at the show and owning zero G, I would say the Ridge has a way better walk mode. Bigger range with much less resistance, especially backwards.

The ridge was too big for me but I would say the Zero G is more progressive in flex.

Skied the Ridges on Saturday. With putting the much thicker and stiffer Intuitions in them the walk mode is definitely worsened. Unfortunately the forward range of motion is now worse than my Zero Gs, I could definitely feel that on steep skin tracks. Rearward range of motion is still better than Zero Gs. Put then stock liners back in to test today in the house, and the range of motion is soooo much better. So if the Ridge fits you with the stock liner in (which it definitely does not for me, but pretty much no AT boot fits me without putting a thicker liner in it) awesome range of motion, at least for a boot of this stiffness. Speaking of stiffness, these feel similarly stiff to my Zero Gs (which have been skied a few hundred days), but less progressive. I'm still thinking about it, but right now, for me I don't see any advantage of this boot compared to the Zero G, so will likely be selling a pair of size 26 Ridges with one day of use on the shells and none on the liners. Ugh.

Quote:

---

Originally Posted by wilcox510

Skied the Ridges on Saturday. With putting the much thicker and stiffer Intuitions in them the walk mode is definitely worsened. Unfortunately the forward range of motion is now worse than my Zero Gs, I could definitely feel that on steep skin tracks. Rearward range of motion is still better than Zero Gs. Put then stock liners back in to test today in the house, and the range of motion is soooo much better. So if the Ridge fits you with the stock liner in (which it definitely does not for me, but pretty much no AT boot fits me without putting a thicker liner in it) awesome range of motion, at least for a boot of this stiffness. Speaking of stiffness, these feel similarly stiff to my Zero Gs (which have been skied a few hundred days), but less progressive. I'm still thinking about it, but right now, for me I don't see any advantage of this boot compared to the Zero G, so will likely be selling a pair of size 26 Ridges with one day of use on the shells and none on the liners. Ugh.

---

Where are you located? I’d be very interested in buying them from you if you’re serious.

Park City/SLC. Not 100% sure yet, but yes most likely..

Man, I think I’m gonna have to size up to the 27 in the ridge otherwise I’d be all over that.

Cut a walk mode into your intuitions. It works like a charm and is super easy. Doesn’t affect the durability in any meaningful way.

Quote:

---

Originally Posted by GoldenBC

Cut a walk mode into your intuitions. It works like a charm and is super easy. Doesn’t affect the durability in any meaningful way.

---

They are the Intuition Tour Tongue liners, so already have a walk mode cut out. It seems its just like the bulk of having more liner, I need all the extra liner for my foot, but the cuff is pretty bulky so I can only get the cuff velco strap set at number 1 (it goes up to 6), I think that might be impeding things. Maybe I should have cranked down on that when molding the liners.

So more OCD-ing with the boots... Took an old pair of beat up but higher volume liners and put them in the Ridges, and they limited the touring ROM a fair amount as well. Then I home molded those liners and cranked down on the cuff and middle buckles. Afterwards, big improvement in ROM. So, maybe I'll remold my 1 day old Intuition Tour Tongues and do the same with them. These things are seriously stiff though, I do wish they were more progressive like the zero Gs. I'll also say that in actual use in the field the Hoji Lock was kind of challenging to push down into ski mode. I'm sure I just need to get the hang of it a bit, but I could see that in a really awkward/exposed transition spot it might feel challenging.

Quote:

---

Originally Posted by wilcox510

So more OCD-ing with the boots... Took an old pair of beat up but higher volume liners and put them in the Ridges, and they limited the touring ROM a fair amount as well. Then I home molded those liners and cranked down on the cuff and middle buckles. Afterwards, big improvement in ROM. So, maybe I'll remold my 1 day old Intuition Tour Tongues and do the same with them. These things are seriously stiff though, I do wish they were more progressive like the zero Gs. I'll also say that in actual use in the field the Hoji Lock was kind of challenging to push down into ski mode. I'm sure I just need to get the hang of it a bit, but I could see that in a really awkward/exposed transition spot it might feel challenging.

---

They're making a non-pro version that comes out fall 2024 - wonder if that's going to be more progressive.

Quote:

---

Originally Posted by wilcox510

So more OCD-ing with the boots... Took an old pair of beat up but higher volume liners and put them in the Ridges, and they limited the touring ROM a fair amount as well. Then I home molded those liners and cranked down on the cuff and middle buckles. Afterwards, big improvement in ROM. So, maybe I'll remold my 1 day old Intuition Tour Tongues and do the same with them. These things are seriously stiff though, I do wish they were more progressive like the zero Gs. I'll also say that in actual use in the field the Hoji Lock was kind of challenging to push down into ski mode. I'm sure I just need to get the hang of it a bit, but I could see that in a really awkward/exposed transition spot it might feel challenging.

---

It's easier if you undo the top buckle

Sent from my moto g 5G using Tapatalk

Quote:

---

Originally Posted by rod9301

It's easier if you undo the top buckle
Sent from my moto g 5G using Tapatalk

---

Are you referring to pushing the Hojilock down? I don't understand. There is no top buckle. The Hojilock does the Velcro strap top cuff closure. per Dynafit you're supposed to close the ankle buckle first then "close" the Hojilock

I'm referring to my hoji free boots, do it might be different.

Anyway, the idea is to loosen the top, either buckle or Velcro. It's really hard to go into ski mode with them tight, regardless what dynafit says

Sent from my moto g 5G using Tapatalk

Quote:

---

Originally Posted by wilcox510

So more OCD-ing with the boots... Took an old pair of beat up but higher volume liners and put them in the Ridges, and they limited the touring ROM a fair amount as well. Then I home molded those liners and cranked down on the cuff and middle buckles. Afterwards, big improvement in ROM. So, maybe I'll remold my 1 day old Intuition Tour Tongues and do the same with them. These things are seriously stiff though, I do wish they were more progressive like the zero Gs. I'll also say that in actual use in the field the Hoji Lock was kind of challenging to push down into ski mode. I'm sure I just need to get the hang of it a bit, but I could see that in a really awkward/exposed transition spot it might feel challenging.

---

It's weird that you have less forward ROM in the Ridge with an Intuition Tour Pro than the Zero G ... I'm assuming you also used an Intuition in the Zero G? I guess I'm struggling to understand your experience with how liners affect the ROM of both boots. Can you elaborate, or am I just confused?

Quote:

---

Originally Posted by auvgeek

It's weird that you have less forward ROM in the Ridge with an Intuition Tour Pro than the Zero G ... I'm assuming you also used an Intuition in the Zero G? I guess I'm struggling to understand your experience with how liners affect the ROM of both boots. Can you elaborate, or am I just confused?

---

I would guess he's able to use a thinner liner in the zero g because of its lower volume shell fit

Quote:

---

Originally Posted by auvgeek

It's weird that you have less forward ROM in the Ridge with an Intuition Tour Pro than the Zero G ... I'm assuming you also used an Intuition in the Zero G? I guess I'm struggling to understand your experience with how liners affect the ROM of both boots. Can you elaborate, or am I just confused?

---

I actually think the forward ROM of the Zero G is pretty good, especially with the buckles all the way loosened, any my Zero Gs have different cuff buckles on them with longer touring latches which makes it even better. Its the rearward ROM of the Zero G that is not great in my opinion. Anyways... with the really bulky cuff off the current liner I have in the Ridge it just wont let them flex much, its not really the liner, its like the liner gets bound up within the shell. I think I just need to compress the liner cuff a bit with remolding and it will help quite a bit, as it did in my experiment with the old liner.

Quote:

---

Originally Posted by wilcox510

I actually think the forward ROM of the Zero G is pretty good, especially with the buckles all the way loosened, any my Zero Gs have different cuff buckles on them with longer touring latches which makes it even better. Its the rearward ROM of the Zero G that is not great in my opinion. Anyways... with the really bulky cuff off the current liner I have in the Ridge it just wont let them flex much, its not really the liner, its like the liner gets bound up within the shell. I think I just need to compress the liner cuff a bit with remolding and it will help quite a bit, as it did in my experiment with the old liner.

---

Wait... did you not first mold the liner in the Ridge boot? lol

Quote:

---

Originally Posted by Lindahl

Wait... did you not first mold the liner in the Ridge boot? lol

---

Yes I molded them. Note how I wrote "remolding" which implies doing it again... It's all in the reading comprehension

Quote:

---

Originally Posted by wilcox510

Yes I molded them. Note how I wrote "remolding" which implies doing it again... It's all in the reading comprehension

---

You could have molded them previously for a different shell.

With the floating tongue design, do you skin with the middle buckle closed or open? Sorry if that's obvious to everyone, but it's not clear to me.

I had assumed you'd leave the middle buckle open while touring (like you do with all upper/cuff buckles), because I had (incorrectly) assumed the BOA on the lower/clog governs the floating tongue volume. But that cripple creek video shows how the volume taken up by the floating tongue design is based on the closure of the middle buckle. So it seems like you'd have to close the middle cuff buckle to lock your ankle/heel down while skinning. But does closing the middle buckle kill the ROM for touring?

I care less about what Dynafit says and what people actually do when touring. Like I know Dynafit markets the Hoji lock as a "set and forget" type thing where you don't adjust the power strap for touring or skiing ... but many people loosen the strap on long skins to improve the ROM and then tighten for ski down.

From what I recall, the boa clamps down on your foot and the middle buckle pulls the tongue back. So, with the middle buckle undone, the tongue is floating and gives you more walk mode ROM. When they say floating tongue, it is floating fore and aft.

Can anyone comment on how the Ridge feels out of the box compared to something like a Radical or Tigard?


Sent from my iPhone using Tapatalk

Can anyone comment on the fit relative to a Tigard or Radical? Apologies if this has been asked.


Sent from my iPhone using Tapatalk

Sadly just don't really work for me, so I'm selling. Size 26. Shells used twice for a total of about 6 hours, liners never used. No punches or stretches to the shells. No 26s available in the country retail as far as I can tell. $750. Retail for $900 plus tax, so saving about $200.

Quote:

---

Originally Posted by wilcox510

Sadly just don't really work for me, so I'm selling. Size 26. Shells used twice for a total of about 6 hours, liners never used. No punches or stretches to the shells. No 26s available in the country retail as far as I can tell. $750. Retail for $900 plus tax, so saving about $200.

---

If you bought them at skimo co you can return them within 30 days even if they are used.

Man, I usually size down to a 26 but I think it makes sense to go 27 in these with what everyone is saying about the length.