Post a photo of your broken heel.Quote:
Originally Posted by robgoose
If the lower part of your arm broke, then I have a part for you to fix it (the pivoting ring with threaded male arms, but all I have left are the old-style with rubber pads).
But if the UPPER part of your arm broke, then I do NOT have any part for you (you would need dildo with threaded female arms).
.
I could use some P18/Pivot 18/14/FKS heels. Would buy a cheap full set.
Vitamin- I need a set of the metal brackets for the mounting screws off of a PX 15-18n heel piece. you can see them just under the DIN window in your px heel piece photos . Let me know if you have anything. Much appreciated.
I have no more FKS heels for sale. Maybe someone else will chime in here.Quote:
Originally Posted by Natedogg
Yep. Do you only need 2 brackets? Or all 4 of my part in photo below? Or do you want both whole heels? Or what? Either way, it's Free + Shipping + round up for beer money. (Obviously, whole PX heels cost more to ship than tiny brackets.)Quote:
Originally Posted by teamdirt
Attachment 249353
.
Just the brackets- 2 please. PM sent
Thanks! I’ll send a pic as soon as i can get ahold of the ski again (likely next month)Quote:
Originally Posted by Vitamin I
Thanks for the photo.Quote:
Originally Posted by robgoose
1.) Above all else, PLEASE DO NOT THROW ANY OF THAT INTO THE TRASH. We'll either fix you up, or else your parts will fix someone else up.
2.) Your photo does not show any piece of broken-off male arm sticking out of the female hollow cylinder opening. If you already unscrewed the broken-off male extremity and removed it from the female cylinder, then we'll get you fixed up easily from there. ON THE OTHER HAND, if there is still a broken-off male piece inside that cylinder, then first you need to remove that broken-off piece from the cylinder (which can be very tricky if it is recessed deep inside the cylinder, but I predict success with advice from me and others).
3.) After that cylinder is empty, the replacement parts I have available for you are old parts with old-style rubber pads, but people tell me they work fine and they cannot feel any difference while skiing:
Attachment 250702
4.) If we make it this far, then also examine your black plastic baseplate (which is the lowest plastic part of the heel)---and determine if your arm-breaking crash also broke or cracked that plastic, in which case I have that spare part for you as well.
5.) If all this is too much hassle for you, then treat yourself to new bindings, and maybe your remaining parts can help someone else.
.
1) The skis are in the possession of the parents of the person to whom I lent the skis last season.
2) I have been told by the parentsthere is still a broken-off male part within the binding... And yes I will appreciate any assistance you could offer for removal methods
3) As I understand it from the person who broke my binding, this all happened when he was trying to click out of the binding, so it would seem that he broke the arm but not the baseplate
4) That said, I would happily acquire both parts, in case the black plastic plate is also broken
5) I would much rather fix the bindings than replace. (if only for the satisfaction of having succesfully done so, but also because I'm not sure if those bros can take another mount.
Oh ... and thank you very much!
Received a pair of toes from VI, and gotta say he's a fantastic seller, super duper helpful.
quick question in the fks/pivot universe. mixing and matching toes and heels, from say 12 to 18, assuming your using a similar setting, say 12 on a pair of toes, and 12 on a pair of (12, 14 0r 18 heels) or heels / toes switched - all things should be equal: of course ignoring, lawyers, risk managers and wives. any thoughts to the contrary?
^ I wouldn't think twice, but then I'd probably be fine running metal Pivot toes with Soli STH heels, etc. For the record I'm not a disciple of the Pivot heel religion, but like the design of the toes.
I vote YES, mix & match as much as you want. The FKS 12 heel seems to be exact same as FKS 18 heel, except DIN spring strength. The plastic toes for 12 & 14 are very different from the metal toes for 15 & 18, but all those toes are sold with heels that are identical (except DIN spring strength), so feel free to mix & match all those toes & heels.Quote:
Originally Posted by Just Looking
I've done that repair only once, and I had success dremeling a slot into it, which provided grip for a flathead screwdriver to unscrew it out. Other people recommend spinning it out using an Easy-Out/Screw extractor or reverse drill bit? See details at: https://www.tetongravity.com/forums/...ck-in-heel-armQuote:
Originally Posted by robgoose
Do you want my parts now? Or later after you successfully remove that broken-off arm?
.
let’s do the part with the male arms to start.... (and assume that I will ultimately be successful in removing the embedded make part)
Last chance to buy parts from me (until Thanksgiving again), before I leave town for a month of WRODs.
.
Pm sentQuote:
Originally Posted by Super G
Also sent you a PM the other day.Quote:
Originally Posted by Super G
Looking for Pivot 18s or 15s here!
Looking for look px, rossignol axial, pivot 18/fks 18 toes. And pivot/fks heels. Open to almost anything. Also need half a pair of the 14s
Sent from my iPhone using TGR Forums
If you used your real email address as your username, prepare for attack by spambots from hell.Quote:
Originally Posted by willickxxxxx@gmail.com
Ask a moderator to change it for you.
anyone have anything? lmk know what you have
I am OUT of metal toes (no DIN=15,18 left...but I have plastic toes available in DIN=11,12,14).
I am OUT of FKS heel dildos & half-moons, but I still have heel baseplate parts available for people in need.
I might find more used pairs/parts in April, and will offer them up again.
.
Really need P15s(preferably) or P18s if anyone is selling them. Broke my old bindings - don't have any for my skis for this season. Thanks!
I have a set of p18 with wide brakes. Excellent condition looking to get rid of. Pm me
Pm'dQuote:
Originally Posted by teamdirt
Sent from my iPhone using TGR Forums
I have some FKS 185s with ~95mm bent brakes here:
https://www.tetongravity.com/forums/...-skinny-brakes
Anyone holding 130mm brakes?
looking for metal toes. any din and does not need to be a pair
PM sent.
I need a p14 dildo. I never thought I’d ever write anything remotely close to this
Sent from my iPhone using TGR Forums
I just mounted some old rossi FKS 14 bindings on my skis but my ski tech buddy said that they were so old, I should probably get some new bindings or at least new heel pieces or at the very least, 110-115mm brakes to make them actually fit my ski. Anything out there???? Thanks!
Mickey
This is what you need: FKS Base Plate.Quote:
Originally Posted by durangotang
Attachment 259732
Good deals can be found if you look hard enough.
I have some 115mm baseplates, in DGO too.Quote:
Originally Posted by durangotang
Broke some pieces tonight (lesson learned: bending brakes without a vise is a mess, at least for me), PM sent.
Also, to add to the for-sale pile, I have a pair of 18-din FKS Course toes (i.e. not the toes currently sold with pivots). They look to be all metal and are probably indestructible. A pair of lower din plastic versions are listed in the first post. Teflon pads missing in the afds. Price is $shipping if anyone will make use of them.
Ive got some 130s, brand new, would sell or trade for new 95sQuote:
Originally Posted by sruffian
I have some metal 18 din toes that I’m looking to trade for some metal 15 din toes
Sent from my iPhone using TGR Forums
Pm'dQuote:
Originally Posted by wizbang
Sent from my Pixel 2 using TGR Forums mobile app
Lots of look and rosi pivot parts for sale here:
2 look pivot 14 heels - silver
Sold - 2 rosi pivot 18 toes - black
2 look pivot 14 toes - silver
2 look pivot 14 toes 1 toe missing wing- silver
2 full heel assemblies 100ish bent brakes. All parts intact.
Full pair rosi fkx 12 - skinny brakes
Sold - 1 rosi 155 heel - black/gold
Sold - 1 rosi 14 heel - black
1 heel assembly with half moon piece
1 heel with out half moon piece
2 springs for heel assembly
Lots of screws if you want to piece a set together
Pricing is completely negotiable, make an offer! https://uploads.tapatalk-cdn.com/201...c279486817.jpg
Sent from my SM-G955U using Tapatalk
ill take 2 rosi pivot 18 toes - black
edit: and the
1 rosi 155 heel - black/gold
1 rosi 14 heel - black