PSA: Mount your own fucking skis.

Should've mounted my own fucking skis...

I just got a pair of new one eighty fr dimes. I don't have a four point one bit or tap and was feeling lazy so took them to a shop. Marshal put on the ski, mount negative six from true center, negative eighty four from tail. Shop guy measured eighty four added six and basically mounted center. On the phone he didn't seem to comprehend the mess up and insisted he mounted according to the instructions. I wasn't likely to ski them this season anyways, but looks like Im ordering the bit and remounting myself this summer.

Not that I wouldn’t then proceed to mount them myself— but I’d be fucking irate at that shop, demanding refunds and all sorts of free waxes for essentially fucking up a very rare and hard-to-get ski.

Call again. And this time tell them we sent you.

Fuck that shop.

You know what that shop rat’s math is? That “measure twice to get to center?” That’s called weed.

Only people (ahem— people like myself) who have a history with weed and have also lived in societies where it’s not acceptable can identify, with pin-point accuracy, a stoner trying to function at work.


Sent from my iPhone using TGR Forums

Quote:

---

Originally Posted by Relica

Should've mounted my own fucking skis...

I just got a pair of new one eighty fr dimes. I don't have a four point one bit or tap and was feeling lazy so took them to a shop. Marshal put on the ski, mount negative six from true center, negative eighty four from tail. Shop guy measured eighty four added six and basically mounted center. On the phone he didn't seem to comprehend the mess up and insisted he mounted according to the instructions. I wasn't likely to ski them this season anyways, but looks like Im ordering the bit and remounting myself this summer.

---

That sucks. Where you at? Someone here likely has the bit and tap you need.

At a minimum get your money back from the shop.

Or the ski could have a fucking line on it, make it easier for everyone.

Not sure how to do quotes with the current issues.

I got a refund they offered a remount but I passed. I'm in rural mountain Colorado about, close to a small mountain that the fr dimes are perfect for, but a lack of quality shops. I just ordered a bit and tap. I have am100s coming in the fall so a worth while investment.

I agree on the line being on the ski, although I'd hope a shop isn't trusting top sheet lines and still measuring. I believe Marshals adding a line next year. Still I don't know the logic behind the math and agree with giajin either stoned or hung over to work that out. I should've measured and drawn the line myself.

https://imgur.com/a/Bubnh67

Remounted my own fucking skis Removed HM12s and put on attack 14s

I have done every one of my mounts ever, with exception of the last two. That's probably ~50 mounts at this point.

Life is busy and stressful right now so I took 2 pairs of skis to a well known shop in Seattle this winter.

Line Vision 108s for an insert mount for MTNs, and SGN Toggas for a regular mount for Alpinists.

Both aren't great, but the Vision mount is F'd. I was putting storage wax on them today and realized the bases on one ski are dimpled so badly that the base material is delaminating from the core material under all 8 inserts. I called the shop, they said bring than back in to see if they can heat/pound the bases flat, then grind. I don't think there's enough base material to do that--I think these should probably be replaced.

The Togga mount is more annoying than anything, the heel piece one one ski is mounted a few mm further back than the other and the boot does not drop perfectly in to the pins, it actually hits the rubber sole material a little bit. That's annoying because I know I would have done better, and on a new pair of skis it feels very frustrating. I have decided I will live with this one because I don't think it will effect the way they ski and I can get my head around that.

I'll update after I get the Visions back to the shop. Hoping for some input on what my reasonable ask should be. Right now I feel like replacement is a reasonable ask.

https://uploads.tapatalk-cdn.com/202...a71b58a4f2.jpg
https://uploads.tapatalk-cdn.com/202...dd10461263.jpg
https://uploads.tapatalk-cdn.com/202...2c7e57dbb5.jpg

Wow. Lotta daylight there.

I’d ask for a replacement. That’s not awesome.

Quote:

---

Originally Posted by m2711c

Wow. Lotta daylight there.

---

Yep. The base is only 1.3mm thick, so not a lot of forgiveness there for a grind.

<p>
Always better to fuck it up yourself. Did it on a pair of new Stocklis&nbsp;but ground the screws shorter, then hit the bumps with a hammer and stone ground them and they were fine.</p>

Quote:

---

Originally Posted by gregL

<p>
Always better to fuck it up yourself. Did it on a pair of new Stocklis but ground the screws shorter, then hit the bumps with a hammer and stone ground them and they were fine.</p>

---

Serves me right I guess. I was living away from home without the usual tools at hand, and I thought I could get away with one. MYOFS!

Ok, question. I’ve used my Jigarex to mount a ton of Attack and SPX but haven’t used it for a set of pivots yet for a variety of reasons (ie, thanks for the mounts Dibbs). Time to lace up a set of P14s to my daughters Bents.

I seem to remember reading in here that the Jigarex spacing may be off on the pivot jig plates. Didn’t see anything on a quick search but search sucks.

Anything I need to worry about on a pivot mount with a Jigarex or is it just point and shoot like normal? Or anything special on a pivot mount in general?

Do a test mount first. If it's off, adjust accordingly

I haven’t done anything special w the [emoji640] pairs I’ve mounted and haven’t died yet

correlation does not imply not causation.