I do have the 2013 Look Pivots & my BSL is 330. And yes I do plan on mounting them myself. A template would be awesome. ThanksQuote:
Originally Posted by Alpinord
Printable View
I do have the 2013 Look Pivots & my BSL is 330. And yes I do plan on mounting them myself. A template would be awesome. ThanksQuote:
Originally Posted by Alpinord
Hi guys - stoked on my DynaLook plates - already have them mounted on my Megawatts and Verdicts with a set of FKS's on there! I was wondering if the G3 Onyx would work, or should I go with Dynafit Comforts? Both are used bindings I've found for a good deal.
Thanks!
shameless plug for a friend's cottage industry invention, it's spendy but it will mount anything. Well maybe not livestock and the like but you get the drift.
http://www.allskijig.com
Another successful mount completed using the Look/Rossi PX/Axial 2 template from Jondrum's site. Big props to all involved. Will most likely be installing inserts on two pairs of my skis in the near future. Won't even consider buying from anywhere but Jon.
Is there something wrong with the non-radical Dynafit template? I've tried on many printers and computers, with print scaling disabled, and it always seems that the print scaling checker is 19.25mm or thereabouts long. I used the Solly template just a couple weeks back, and the scaling was fine. Am I overlooking something? Can somebody check if it works OK for them?
Then adjust your print scaling obviously. Simple solution....Quote:
Originally Posted by angrysasquatch
The templates are all on. Check scaling as suggested.
Thanks to everyone who has put work into this, such a great resource!
Did my first self mount (inserts for STH's) over the last couple days and everything is spot on. Measure twice and drill once and you can't go wrong.
Thanks again!
mrski00, here is the 2012 Look Pivot/FKS 330 BSL template to check out. I included some overall and other dimensions so you can verify scale and then check with the binding hole pattern.
EDIT: I went ahead and generated a series of 2012 Look Pivot/FKS templates in 10mm increments from 240mm to 390mm. You can turn off BSL layers in the PDF. Hopefully, I didn't muck them up in the process....please verify and let me know of any errors.
Any chance we could get the Guardian template in a legal paper size so we can have the sidewall centering marks?
Anyone? Anyone?
If you or someone gets me a scan and/or measured hole layout relative to BCS I'll give it a go.Quote:
Originally Posted by F.D.V.
just mounted the g/f's dynafits using the Radical template. Worked like a treat - cheers!
I just ordered some of these today, so I would also love any assistance from the template pros.Quote:
Originally Posted by F.D.V.
Mounted my third pair of bindings using these templates last night, and wanted to say thanks again. TGR is an amazing resource for stuff like this!
And seriously, if you have a drill, mount your own bindings. It's not that hard.
Never mind.
Terry, Thanks, spot on. Another successful mount. Made a template using sheet metal so future mounts will be a piece of cake. Looks great, but that Kiwi green is a bit too much for a 86 yo.Quote:
Originally Posted by Alpinord
First Dynafit mount; Radicals.
One ski was perfect. The other, despite multiple measurements I somehow got the toe slightly off - not sure at what point, but the heel lines up about 4mm off-centred at the rear pins. Doesn't seem to be too big of a deal - they seem to click in just fine. Perhaps I should just be more careful on that ski? Any suggestions, or stop worrying too much about it?
Sounds like if you loosen the toe piece, center the heel pins and then tighten the toe back down all will be good.
Thanks Jondrums for the Tyrolia template..... Peak15 THall pro model perfect fit....
woohoo...mounted dukes (sm). template was money.
thanks.
cheers,
P
Great idea for binding jongs to mount on a piece of wood first, as I totally fucked up my Guardians mount. Was blown away how bad I messed it up with no booze or weed in me. Anyways, was very careful after that and mounted them dead centered with no heel slop. I noticed the toe mount shows a sliver of light between the binding and ski. I am afraid I will strip the holes if I tighten it more. I did use waterproof glue on the holes, so I hope it is ok. Thanks for the template guys.
Just used the STH template for the first time and have used the other paper templates as well. Worked out fantastic as usual. I really appreciate all the reference material in this thread and on the forum! Thanks!
call me stupid or what ever, dont know what template i should use...
I got the maker mod 9.0 ESP (see the picture -> http://thumbs1.ebaystatic.com/d/l225...BZ0YRNpv1g.jpg)
Thanks for all the help!
Also mounted some 914s for the first time on some powder boards. Went smooth, other than fucking up the brake bending. Used sone 916 brakes with a little plastic grinding on the bench.
Liv2ski, it's likely you didn't uni-bit (volcano) the holes first? Also bit depth is important with dense cores. Sorry to hear it man! Binding freedom inserts?
1) Remove bindingsQuote:
Originally Posted by liv2ski
2) Use chisel or razor blade to remove volcano on top sheet
3) Re-glue and carefully tighten.
sorry to be blunt, but I didn't do a template for those because they suck. Also, because nobody volunteered the measurements.Quote:
Originally Posted by heikder
But more importantly, because they suck;-)Quote:
Originally Posted by jondrums
Picked up some of the new dukes, the template for the toe is dead on, the heelpiece is a bit longer than on the template. On the template in this thread the holes look like they're 70.5mm apart, on the template that came with them it looks more like 71mm (kind of on the light side, probably more like 70.8 or 70.9, hard to tell with my ruler). Haven't bought the skis yet so I won't be mounting them for awhile, let me know if you want me to scan them template or something.
here's the heel plate on top of the template.
Attachment 128788
I had a similar thing going on last year when I mounted dukes to my maestros. It ended up not being an issue. The screws went into the pilot holes. I was only on those skis around ten times last year with two shorter tours. Never noticed any problems.Quote:
Originally Posted by powder fiend
That makes sense, it's such a minuscule amount. I mounted some old dukes a couple weeks ago and never noticed it. was probably just being over cautious because the epf template is unverified, thanks for the input!
I can def. modify the EPF template if there is a problem. All I did to create it is to widen the standard duke holes. I wouldn't be terribly surprised if they tweaked things a tiny bit when they widened it. I have to ask - are you positive that you printed with the correct print scaling?
yup, I just triple checked the scaling, it's dead on. let me know if I can do any measurements for you, I'm mounting them tonight. it's only off by about a 1/2 mil so I'll just mark out the rear holes a hair further back
Add my name to the list of thanks- mounted my Coreupt Candide Pows last night with the help of Jondrum's Tyrolia template. Everything lined up great, I started driving myself crazy measuring everything 20x, this was the first time I drilled my own skis. Went skiing on them today and I didn't die, so I guess that means I did it right. :yourock:
you know life is good when you walk into the house to the computer to search for the binding template thread and it is top and center bump....
And just in case anyone missed it...
DOUBLE CHECK YOUR PRINT SCALING
Because my brand new skis now have two mounts on them.
http://audibleconnection.com/wp-cont...all-yellow.gif
^^well, ya, duh.
Another successful FKS mount on a new set of boards, thanks for the valuable resource!
Bump back to the first page.
STICKY???!!!!
Finally got my Binding Freedom inserts mounted. Huge thanks to Jon and a shout out for his great customer service. They are on top of it.
FYI, I just noticed the link to griffons on your site is down.
Still hoping that someone can provide a template for a PX12 demo binding.
If anyone has a jig, this is the instruction sheet that was included...
http://i1199.photobucket.com/albums/...ps17b1ab87.jpg