FS: FKS/Pivot Bindings: Used complete sets, and parts, mix-and-match

Printable View

Show 40 post(s) from this thread on one page

10-31-2021, 02:20 PM
Sandbox

2 Attachment(s)

I have a pair of Pivot 14 dual WTR in white with a 110 or 115mm brake ( currently on 106mm with lots of room) that I’d like to trade towards a marker kingpin or shift with cash. Send me PM if interested.

Attachment 391024
Attachment 391025

Sent from my iPhone using TGR Forums
11-07-2021, 10:05 AM
Brasso

Looking for white Pivots to fit a 108 width ski. Whivots to the front desk please.
11-07-2021, 10:06 AM
J_Berg

FS: FKS/Pivot Bindings: Used complete sets, and parts, mix-and-match

Quote:

Originally Posted by Sandbox

I have a pair of Pivot 14 dual WTR in white with a 110 or 115mm brake ( currently on 106mm with lots of room) that I’d like to trade towards a marker kingpin or shift with cash. Send me PM if interested.

Attachment 391024
Attachment 391025

Sent from my iPhone using TGR Forums

Hey I’d love to buy these! I pmd you

Sent from my iPhone using TGR Forums
11-07-2021, 10:53 AM
schindlerpiste

Anyone have 115mm brakes f/s, or want to trade for 130mm brakes?
11-07-2021, 07:50 PM
Phall

Do you need to run the 4mm lifters on turntables? Just pulled some 15’s off my lady’s skis to go on my new to me wildcats. Pro/con?

Sent from my iPhone using TGR Forums
11-11-2021, 09:24 AM
davjr96

Anyone have a pivot jig or jigarex they are looking to sell? Or any leads on where to find one for a non shop/industry normal person? Jigarex shipments to Binding Freedom/Tognar look to have been delayed this fall.
11-11-2021, 01:29 PM
Yawn Peel

Looking for a set of GripWalk AFD's for 15/18's. Can also trade for the traditional alpine ones of that is of interest. Happy to cover postage if someone has a pair to hook a homie up. Or if anyone is local in SLC I'll buy you a beer. Cheers!
11-11-2021, 01:40 PM
nbak

In the market for pivots fitting a 124mm wide ski.
11-11-2021, 08:17 PM
the_eleven

2 Attachment(s)

Anyone interested in these totally non-indemnified Rossi FKX 4-12 w/85mm brake? They were skied around 15 days after the skis blew up, have been sitting in my parts box since. Probably from between 2000-2003?

Free to a good home.

Attachment 392408 Attachment 392410
11-11-2021, 08:48 PM
CHAIR_97

Quote:

Originally Posted by the_eleven

Anyone interested in these totally non-indemnified Rossi FKX 4-12 w/95mm brake? They were skied around 15 days after the skis blew up, have been sitting in my parts box since. Probably 2003?

Free to a good home.

Attachment 392408 Attachment 392410

I'm interested

Sent from my SM-G981U using Tapatalk
11-11-2021, 10:28 PM
the_eleven

Quote:

Originally Posted by SirVicSmasher

I'm interested

PM me.
11-12-2021, 03:54 AM
neverenoughskis

Quote:

Originally Posted by Wes Mantooth

I have a pair of nice condition fks 185s I just pulled off some skis if anyone wants em. Oldies but goodies - from my experience these older guys are more durable than the post 2010 re-release but the colors aren’t as sexy. Brakes bent to around 105 but could fit a little wider - I also have the stock narrow brakes I can replace them with if you’d prefer.

Thinking $140 plus ship if that’s fair. Will include dog for an extra $37, good luck with her

https://uploads.tapatalk-cdn.com/202...d84ab7ed76.jpg

Pm'd! Not sure if it went through
11-12-2021, 03:08 PM
mshumate

Looking for a set that'll fit a 90mm waist
11-12-2021, 06:40 PM
Wes Mantooth

FS: FKS/Pivot Bindings: Used complete sets, and parts, mix-and-match

In a continued pursuit to help pay medical bills here’s a pair of Pivot 14’s. 115 brakes, dual WTR toes so that’d tell me they’re from around 2018. Really nice condition overall, only area to note is that there’s a little chip underneath one of the toe wings. The roller is still fully intact and this won’t impact releases at all, purely cosmetic - see photo

$150 shipped? Check me on price

SOLD

https://uploads.tapatalk-cdn.com/202...5d8116c02b.jpg

https://uploads.tapatalk-cdn.com/202...9005d96fab.jpg

Sent from my iPhone using Tapatalk
11-15-2021, 07:58 PM
neverenoughskis

Hey all, I'm looking for some 14s or 15s for a 96mm waist.

On another note, I know this isn't the right thread for this, but what's the resell on a pair of mnc warden demo bindings?
11-18-2021, 09:27 PM
Vermontfreeride

Have some old geeze pivot 18 toes (x4) and some skinny brake turntables if anyone is in need

Sent from my iPhone using TGR Forums
11-19-2021, 01:55 AM
skibum19

Anyone have a heel piece for the FKS? 120 width

Sent from my iPhone using Tapatalk
11-19-2021, 06:59 PM
S.B.

Looking for WTR pivots with 95mm brake, any color, if anyone has some to sell. Will trade for STH2 13 or Warden 13 as well

Sent from my SM-G960U using TGR Forums mobile app
11-21-2021, 07:02 PM
utagonian

I have everything except what I need of course.

I need brakes for 83 skis so an unbent 95 should work.

I have new 75s, new 115s & minty 130s to trade.
11-21-2021, 07:04 PM
utagonian

@Yawn Peel
Can you use GW afd from 14s? If so I’ll trade you.
11-21-2021, 09:07 PM
gwat

Quote:

Originally Posted by Utagonian

I have everything except what I need of course.

I need brakes for 83 skis so an unbent 95 should work.

I have new 75s, new 115s & minty 130s to trade.

Uhh 75s on 83 should be mint.
11-22-2021, 01:23 PM
Yawn Peel

Quote:

Originally Posted by Utagonian

@Yawn Peel
Can you use GW afd from 14s? If so I’ll trade you.

Unfortunately not but thanks for the interest!
11-22-2021, 02:53 PM
utagonian

Quote:

Originally Posted by gwat

Uhh 75s on 83 should be mint.

So you’re saying I’d be better off bending the 75s than have the overhang with 95s?
11-22-2021, 02:53 PM
BeHuWe

Quote:

Originally Posted by Utagonian

I have everything except what I need of course.

I need brakes for 83 skis so an unbent 95 should work.

I have new 75s, new 115s & minty 130s to trade.

Still looking for 95’s?

Sent from my iPhone using TGR Forums
11-22-2021, 03:05 PM
utagonian

Quote:

Originally Posted by BeHuWe

Still looking for 95’s?

Sent from my iPhone using TGR Forums

Now I’m not sure…

Let me look at the 75s I have and get back to you.
11-22-2021, 06:28 PM
Pinned

Quote:

Originally Posted by Utagonian

So you’re saying I’d be better off bending the 75s than have the overhang with 95s?

You most likely will not even need to bend them, but if you do it would be very minor.
11-23-2021, 12:14 PM
utagonian

1 Attachment(s)

Quote:

Originally Posted by Pinned

You most likely will not even need to bend them, but if you do it would be very minor.

Attachment 393724
11-23-2021, 12:26 PM
skibum19

DOES ANYONE HAVE A HEEL PIECE THAT THEY WANT TO SELL ME? 120mm plz I’m begging u

Sent from my iPhone using Tapatalk
11-23-2021, 01:00 PM
gwat

Quote:

Originally Posted by pinned

if you do it will be very minor
Attachment 393724

A gentle pry and those will be perfect.
I used to rock unmodified skinny brakes on 89mm waist.
11-23-2021, 01:48 PM
waxman

Quote:

Originally Posted by gwat

A gentle pry and those will be perfect.
I used to rock unmodified skinny brakes on 89mm waist.

exactly, the pivot brake is easily 10-12% wider than they say. I have run 75mm up to 90 as well
11-23-2021, 06:13 PM
FlimFlamvanHam

How do you guys do this? This easy tweaking, little pry here.

Quote:

Originally Posted by gwat

A gentle pry and those will be perfect.
I used to rock unmodified skinny brakes on 89mm waist.

I know you know Pivots like very few on the planet, but I'll never understand the little bend thing. I've bent a few pairs of Pivot brakes in my years (and consider myself really good at it) but I've never been able to tweak a set without pulling them apart. Advice on how to do the "gentle pry"? I've tried but it always feels like I am going to mess up some aspect of the base plate.

My 95 brakes *just* clear a 102 and I've got 75's on 78s that may go a hair wider.
11-23-2021, 06:49 PM
stealurface831

Quote:

Originally Posted by skibum19

Anyone have a heel piece for the FKS? 120 width

Sent from my iPhone using Tapatalk

Do you just need the heel assembly or the dildo as well? Somewhere upthread is the number for Rossi parts and service, which you can call to get heel assemblies in any size for $50.
11-23-2021, 11:41 PM
the_eleven

Binding techs: what is the word on retrofitting an older P14 toe with a Gripwalk AFD? Yes or no go?

I called Rossi and was informed that part FCHF004 (see post #434 for parts list) would not work with the P14 toe because there would not be enough height between AFD and toe with a grip walk boot, and that there is no part that will do this.

Am I on my way to buying new bindings for the new boots?
11-29-2021, 12:05 PM
HAB

Quote:

Originally Posted by the_eleven

Binding techs: what is the word on retrofitting an older P14 toe with a Gripwalk AFD? Yes or no go?

I called Rossi and was informed that part FCHF004 (see post #434 for parts list) would not work with the P14 toe because there would not be enough height between AFD and toe with a grip walk boot, and that there is no part that will do this.

Am I on my way to buying new bindings for the new boots?

Doesn't work, unfortunately. Though the dual Alpine/WTR version is GW compatible if that's what you have.
11-29-2021, 12:06 PM
HAB

I could use a pair of heels (or even just dildos) if anybody is holding. 14/15/18 all fine.
11-29-2021, 02:47 PM
the_eleven

Quote:

Originally Posted by HAB

Doesn't work, unfortunately. Though the dual Alpine/WTR version is GW compatible if that's what you have.

Thanks for confirming this.
11-30-2021, 01:59 PM
Yawn Peel

1 Attachment(s)

got some pearly white p18s in real good condition. 95mm brakes. fresh AFDs both Alpine & GripWalk compatible. clean hardware.
price is $269 cause these will probably get you laid.
local in SLC. feel free to message me.
11-30-2021, 03:40 PM
D-Roc

Quote:

Originally Posted by FlimFlamvanHam

How do you guys do this? This easy tweaking, little pry here.

A wee piece of 6in pipe and bend baby bend
12-03-2021, 11:42 AM
1000-oaks

4 Attachment(s)

Have two metal Pivot toes, one 15 and one "18". Both have the "old style" pedestal (with the two square cutouts on the underside), which I believe can also use the new-style AFD's

Pivot 15 Toe

Attachment 395062

Attachment 395063

The "18" toe was originally a 15 but now has the guts from an 18, so you can't use the DIN setting scale (which I marked out with a black sharpie). To set the DIN on the converted toe, you'd have to have an original 18 toe and count the number of screw turns from when the white line appears in the setting window to your desired setting, and than crank the same number of turns on this "18" toe. Then if you want, have a shop test the setting and fine-tune the adjustment.

Attachment 395061

Attachment 395060

I can't ship until week of 12/13. Is $35 per toe shipped (to lower 48) reasonable?
12-03-2021, 06:50 PM
singlecross

2 Attachment(s)

I’ve held onto these for too long and would like to see them getting used back out in the wild.

FKS 18 with the Geze toes, small lift plates, and skinny brakes. Pulled off a set of DH race boards years ago. Not many runs and good shape. Make me an offer and add $15 for USPS flat rate shipping.

Show 40 post(s) from this thread on one page