Nice, whaddya get?Quote:
Originally Posted by nickwm21
Ordering some Factions in a bit.
Printable View
Nice, whaddya get?Quote:
Originally Posted by nickwm21
Ordering some Factions in a bit.
29 Unions with 1/1 hubsQuote:
Originally Posted by snowday
Sent from my iPhone using Tapatalk
Nice, just pulled the trigger on the 29er Factions with 1/1 hubs.Quote:
Originally Posted by nickwm21
Damn you people and your fancy carbon wheels, it's pushing me closer and closer to pulling the trigger myself. Do I need them? Absolutely not. Do I want them. Yes.
I just ordered 29 unions on hydras after being told I get a bonus this year. Should be a bit nicer than the e13 overcooked noodle on novatec I have now. 20% off till the end of the month at at that price why not spend the extra $200 for the bling hubs. Delivery isn't until febuary but hopefully there is snow on the ground until then anyway.
That's me.Quote:
Originally Posted by Boissal
I want some light bicycle rims to put on my SS. Keep the hubs and get some Sapim CX ray spokes.
FOMOQuote:
Originally Posted by Boissal
Ya know, kinda, but I have some Carbon rims w/ Sapims on my geared bike, and as Katy Perry says, "I like it"Quote:
Originally Posted by XXX-er
wheels sets at chainreaction are actually quite affordable if you can get your hands on them. i tried several times last year and they were sold out. So I just bought some hope hubs and had a buddy build the wheels for me.
dont mean to be spamming but i like color (bling) on my bikes so i go to hope for the components, i've been wanting to buy a 35mm hope carbon bar here in the US they are hard to come by.
I'm pretty into carbon bars with esi grips. Have whiskys on the hardtail and raceface on the hei hei.
Anyhow I bought some shoes today because it's about all they have at shimano and the discount pro purchases reset at the end of the year. Thought about the fancy blue xc9s to match my road shoes but the rx8 "gravel" shoes were a lot less so I got those. Really solid case of I don't need this but might as well use my discount on something.
LBS is doing a 50% off suspension tuneups, so I said fuck it and instead of getting oil all over my apartment bathroom, I brought it in and let them do a full suspension refresh including bearings. I probably overworked both front and rear shocks, put in nearly 200k vert and over 1000 miles this year since the last suspension refresh.
Just finished installing the Wheels Mfg BB in my Diverge. The OEM pressfit was clunking. Not sure how long but it became real noticeable on the trainer. https://uploads.tapatalk-cdn.com/202...f05e141397.jpg
Sent from my SM-N970U using Tapatalk
https://uploads.tapatalk-cdn.com/202...276758564d.jpg
Excited. First new whip since 2014!
Sent from my iPhone using Tapatalk
Is that a new Banshee?Quote:
Originally Posted by nickwm21
Yeah - PrimeQuote:
Originally Posted by John_B
Sent from my iPhone using Tapatalk
Heh. That pierced-downtube arrangement looks a lot like the OLD Trance/Reign frames...
Attachment 360364
I have a thing for cool bottles from cool shops. Randomly stumbled on Ham Cycles(Houston, TX) site and could not resist. Suitable replacements for the La Crow bottles from Crow’s Nest in Bend that finally got nasty after 3 years.
Sent from my iPhone using TGR Forums
Bought some Gravel wheels from Scribe. 25 mm internal. 1315 grams!
Those are cool. I like buying bottles as well and the wife just hates it... have a whole cabinet full that always fall out when you open it.Quote:
Originally Posted by joetron
Sent from my iPhone using TGR Forums
Ha, glad to know I'm not the only one. I get asked multiple times a year "do you REALLY need to keep all of these bottles?"Quote:
Originally Posted by Sandbox
Belated Xmas gift to myself:
Attachment 362190
I went the chinese carbon route because I've never been on carbon hoops and figured I'd ease into it with an option that doesn't require selling a kidney. Those are made by BTLOS. Dealing with them was very straightforward, excellent communication, plenty of custom options outside of what's listed on the website. The only crux this year is availability, hub selection was way more limited than what they usually have on hand. I ordered the wheels January 4th, had some back and forth with them about out-of-stock items, production started Jan 14th or so, and the package came in yesterday with their slow shipping option.
The rims are 30mm ID with a shallow profile (18 mm vs 35 or so on my current DT wheels). Makes them look a lot wider than they actually are. I was toying with the idea of getting Hydra hubs but they barely had any stock on hand, only 32H purple with SRAM driver. I ended up with DT 350 hubs partly because of availability and partly because they're not super fancy but it's hard to find any complaints with them once you swap in a 54T ratchet. They only had the straightpull version in stock, I'll head over to the ask the experts thread to take my beating about that. Also, centerlock. DT Comp Race spokes, 28 holes, the front wheel comes in at 718 g and the back 826 g.
The layup looks flawless, can't wait to see how they actually ride. I may even get new tires to celebrate the occasion instead of moving what's on my current wheels.
^^ Congrats on the BTLOS wheels. I am very happy with mine, and my GF is about to order some as well. She might also get the 30mm IW with 350s. Mine took 6 weeks last spring, FWIW.
What did those cost you Boissal?
$800 out the door. There usually are some solid discounts around Xmas and Chinese new year but this year they probably got hammered by COVID and none of the materialized so I ended up paying full price (there's always a 15% discount on the website). They offered some custom decal design for free but I'm not artistic enough to go that route.Quote:
Originally Posted by John_B
I would have designed a cool EVNE logo.Quote:
Originally Posted by Boissal
Rebranding the chinese carbon to some better known dentist brand crossed my mind. But, I'm not that vain, and I don't need to look like that one beater with the super fancy bike who can't pick his way down the moderate trail. Nobody expects much of me when they see me on the trail: unremarkable bike, unremarkable outfit, unremarkable riding.Quote:
Originally Posted by Dee Hubbs
The ticket would have been to design an intricate pattern of dings and cracks. Tempting fate and all...
Pretty reasonable. I was playing around on their website and came up with ~650 for a cheaper build and was having a hard time believing that was for 2 wheels.Quote:
Originally Posted by Boissal
Quote:
Originally Posted by Dee Hubbs
EVNE not ENVE ;)Quote:
Originally Posted by Boissal
See, you would have missed the ironic joke.
They look great. Is that the matte UD finish? Are they the enduro or all mountain rims? The website doesn't seem to provide much info between the two. I'm guessing just burlier build with a slight increase in weight. Then there is the standard or premium construction option for EN and AM as well.
I think you can be right around $600 shipped if you stick to the default options and a 350 hub without ratchet upgrade (and non-boost hubs).Quote:
Originally Posted by John_B
WeAreTwo wheels? Industry8 wheels? I should have gone with a DTFrench sticker to honor the motherland.Quote:
Originally Posted by Dee Hubbs
Yep, that's matte UD, the weave is impossible to see. I went with the AM option, my understanding is that EN has a thicker layup with more material. You can see it with the estimated weight. At 175 lbs I've never even dinged a rim so I didn't feel the need to go with the beefy option.Quote:
Originally Posted by g_man80
The standard vs premium has to do with ratio of T700 vs T800 carbon with the bigger number being supposedly better (kinda like red paint for ski boots) and maybe a touch lighter.
Thanks for the info. Good luck with them!
Just FYI, I’ve got a set of carbon rims 34mm internal 28H Boost on 350 hubs that were hand built I’m trying to sell. I’d come in a ways under the BtLOS price.
You miss the warranty but get the hand-built bonus on J-bend hubs compared to the straight pull machine build BTLOS and LightBicycle offer.
FYI mine are the 27mm IW shallow profile premium layup with 240s, and they came in at 1390g. I've had to true the rear a bit, but otherwise they're good. IIRC they were $1071 shipped. In retrospect I'd prob skip the upgrade to 240s.Quote:
Originally Posted by g_man80
Mounted up my Xmas Mezzer....stoked
BTW, Bontrager makes some decent carbon hoops that retailed for around $1200 (with good hubs too) if anyone is looking for a non-dentist carbon wheelset. Warranty program is excellent too as I have found out lolhttps://uploads.tapatalk-cdn.com/202...5590990635.jpg
Sent from my Pixel 2 using Tapatalk
Well that looks like a super-fun project! Let's see the finished product when she's done !!Quote:
Originally Posted by nickwm21
Finished up the build this week after coming off the ‘20 Sight...another 2 months of waiting for riding season.
Kept her simple, full XTR, WAO, Fox. Still eager to see what the WAO bike will be come spring.
https://uploads.tapatalk-cdn.com/202...fc3b267551.jpg
That’s the megatower?? Such a nice looking bike....Quote:
Originally Posted by robnow
Sent from my iPhone using TGR Forums
Runt going in the 36 and TRP DHR Evo brakes replacing some Guide RSs.
https://uploads.tapatalk-cdn.com/202...92c3c32278.jpgQuote:
Originally Posted by meter-man
Sent from my iPhone using Tapatalk