Crossposting... details are in this thread:
http://www.tetongravity.com/forums/s...810#post626810
flip and gwat have dibs as they replied in the thread & by PM originally, but if they don't want it, it's otherwise available.
Printable View
Crossposting... details are in this thread:
http://www.tetongravity.com/forums/s...810#post626810
flip and gwat have dibs as they replied in the thread & by PM originally, but if they don't want it, it's otherwise available.
you have the accessory 10mm lifter attached to your binding and the old three hole toe, FWIW that jig may not fit on mid fat or fat skis, with that lifter you had to drill the front lifter holes first and then move the jig ahead 1cm to drill the heel lifter holes....
Bump -- gwat PM'd me and is passing on the jig.
FYI: gwat informs me that the P18 toepiece uses the same hole pattern as the P10/12/14, and is different from the old toepiece shown in my photo. The jig I have for sale does not fit the P10 through P18 toepiece.
Bump, jig available.
Bump, still available.
how much?
you don't want that, you'll hurt yourself
As I said in the other thread (linked in first post above), $30 + shipping, or pick it up around Reno/ Tahoe.Quote:
Originally Posted by s.p.c
$30 is way too rich for your salty blood. and there's a horse in the hospital.