Printable View
I’m of the belief that at the time these manufacturers were just slapping their bindings on risers, and the screws were the same as flat mounts. Any input as to why I couldn’t just mount these flat? The plate screws and the binding screws are definitely different, right?
Attachment 502379
Attachment 502380
Attachment 502381
Attachment 502382
Attachment 502383
Attachment 502384
Yo N! Fairly sure they're standard length. I've had a few pairs of race bindings, never an issue with mounting flat. For those SPX, you may have to device your own template or jig, though.
Sent fra min LE2123 via Tapatalk
Are those SPX or Rockerace? I don't know the difference. Regardless, one of those pictured are probably going onto an RC85 next winter.
Spx AND rockerflex(metal band between toe and heel).
Sent fra min LE2123 via Tapatalk
Ahhh... that's what it's called. Thanks, bro! I appreciate it.
Rockerace would be the one with separate toe and heel.
No worries, brother. For flat SPX mounting, I think people on philpug's site have made it successfully. Just remember the toe AFDs are alpine iso5355 only, so no gripwalk soles.
Sent fra min LE2123 via Tapatalk
Got it. Gonna be 5355 for either of these skis.
Considering I just scored 2 legit (and minty clean) rad-ass bindings for a mere 100$, I'm quite certain that I'll have to fill that financial gap with another ski.
The Rossi is a 35m GS ; what is the Sali ?!
I'd say that any solly 9series clamp can be mounted with or without some type of riser. I roll a lift on skinnier skis, and go flat mount on fatter skis.
You can mount both of those flat no problem. Keep in mind that the Rossi binding has a shorter mounting platform in the heel than a standard spx heel. (80mm fore-aft on center vs 105)
Screw depth should be 8mm plate or no. Only time you would run into an issue is if someone was using shims for a gas pedal or something.
Rockerace heel has a very short platform and most of the heel track is elevated off the ski. Look says you shouldn't mount them without a plate, but it's been done.
Solly ski is an atomic double deck clone.
Welp, my motivation is fading. They’re mint bindings (as in— newish) but both have an annoying metal strip between toe and heel.
And the Rossi’s have that strip above the riser, not integral at all, and it feels like this wired metal strip that doesn’t need to exist. I’d like to just dremel it away.
The Solly’s have the same metal strip, but that entire unit— the plate— is like a meter long, with floating mounting screws. It’s insanely integrated.
Yes, both can be mounted flat- just like you could technically screw your boots to a ski.
But the realist side of me is like- there’s no reason to hoard either of these bindings. Cheap is not enough reason.
Bindings on hold.
Sent from my iPhone using TGR Forums
Don't dremel! The bindings, while weighing a touch more than standard, are actually great. Will allow the skis to flex more freely than standard. Pretty neat.
Sent fra min LE2123 via Tapatalk
So... would you mount that Rossi binding with or without the riser underneath that steel strip on an RC85? That steel strip (the AFD extending from toe to heel, but sitting above a 1cm riser that doesn't connect toe to heel) seems kind of dumb.
I could ditch the risers, just mount the SPX flat with that steel strip for the AFD-to-heel, but the other part of me is like-- bro, just buy a new pivot or a strive. that steel strip just feels so old.
The other part of me is like-- Bro, these FIS legit bindings are basically brand new.
Ok there’s the thing- keep it simple.
If you are a DIN boot guy, buy the skis.
Unscrew the bindings- don’t mess w the plates. Put bindings on your rc85.
That’s it.
I’m still coureous what the Sali ski is. When the new rc73 comes out, we can talk plates.
I'd mount the SPX flat on a ski no sweat, as mentioned above it is the SPX Race version so the heel pattern is shorter in length (front screws are the same) any shop worth it's salt should have the jig.
Can't comment on the Salomons although it looks like any of the old 9xx Equipe jigs would work.
I'd mount the SPX flat on a ski no sweat, as mentioned above it is the SPX Race version so the heel pattern is shorter in length (front screws are the same) any shop worth it's salt should have the jig. Also the metal band is designed to be set for various boot sole ranges so if you can, use the plate on the ski as a reference.
Can't comment on the Salomons although it looks like any of the old 9xx Equipe jigs would work.
Are you in Montana?
As waxman said, Those 916's are the same as all other 996/900/916 holes. And 90% sure the SPX race heel is the same hole pattern as the axial2 15/18 heels. Agreed that any real ski shop should have both of these jigs. Paper jigs are certainly on the google doc.
And dude, IMO the metal bar skis BETTER than non-connected bindings. I run the tyrolia RDx freeflex binding (same functional design) on basically all of my skis from HB122 to R110 to RC85. No downside, all upside. Just saying!
Okay. You've all convinced me. Thank you for the polite schooling. ;-)
I want a full pic of the Sali!!
Code for... how much is shipping from Japan to Vermont??? hahaQuote:
Originally Posted by iriponsnow
Okay. I'll snap one when I pass through again.
Remember when Salomon's NA race program went tits up in the mid-aughts, right around the time Amer bought them up? Atomic pressed their race skis for a season, it's literally just a double deck gs with a Salomon badge. No NA distro; it's like those album covers that only get released in Japan.Quote:
Originally Posted by iriponsnow
Here you go, irip!
A quick google search makes Zombi sound right. But he probably knows more than Google.
Regardless— here they are.
Attachment 502541
Just put the Rossi’s in my car. Thanks again for the advice, everyone.
You mean when Salomons actually started wining some races? I was at an event when the first of the Atomic made civilian Salomon skis were on snow. All the shop staff raving about how well they skied. "No shit says the Atomic rep, they're finally being built by a ski company" ;)Quote:
Originally Posted by ZomblibulaX
We called those Salomon bindings with the metal connector bar "ZZ Lab 916's".
Most of those ZZ Lab 916's had metal heels and metal toes. I can see in your photo that your pair has plastic toes. Before you buy, try to see if the heel is plastic or metal, just so you know what you're getting.
I prefer the metal + metal version. Plenty of people here prefer the versions with plastic toe with metal heel, but most people here don't like the plastic heel version.
.