Printable View
Just placed my 19/20 spare parts order with Look for delivery in Sept/Oct and thought that the P18 loving mags might be interested to know that a replacement GripWalk AFD will be available from then. So if you want a set get your local Look/Rossi dealer to order them now. The part number is FCIF010.
Thanks for this info.
Thanks, Jon. If you get some in, would you mind posting a photo of the GripWalk and ISO 5355 ones side by side?
Do you have any idea what part number these are?! I mean the little plastic tabs at the connection between arms and dildo...Attachment 281161
That part is not available as a spare. Look (like all of the other binding makers) don't list part numbers for every component and don't offer every part as a spare. Here's the 19-20 Parts List. The parts that have been crossed out were on close-out last season and are now no longer available. Apologies for the quality but if anyone wants a copy just PM your email address and I'll send you the Excel document.Quote:
Originally Posted by teosickrider
Attachment 281164
Attachment 281165
[QUOTE=Spyderjon;5664039]That part is not available as a spare. Look (like all of the other binding makers) don't list part numbers for every component and don't offer every part as a spare. Here's the 19-20 Parts List. The parts that have been crossed out were on close-out last season and are now no longer available. Apologies for the quality but if anyone wants a copy just PM your email address and I'll send you the Excel document.
Thanks! I guess I'll just have to ask at a shop...
are they the same for the 14's ?
Thanks for posting that parts chart!
Yes! Thanks for posting!
Spyderjon you dont happen to have any of the non-gripwalk AFD’s?
Also anyone know what the screws are used for the old AFD?
I'm pretty sure I have got some alpine only P18 AFD'd left. It's nearly 11pm here in the UK so I'll check tomorrow when I'm back in my shop and get back to you.Quote:
Originally Posted by mr_pretzel
Re the screw length. Are you using the 4mm shims/spacers that came with the P18's?
Awesome, thanks for checking!
No I am forgoing the shim as I like the increased ramp, it’s the reason I’m looking for the old AFD’s as I feel a big difference with the WTR ones.
So just the length of the short screws, same as the two front ones on the heel.
mr_pretzel , I found these in my bits box complete with a full set of P18 screws (without shim):
Attachment 319054
If you PM me your address I'll put them in the post to you. Might take a week or two to get to you in BC though.
Bumping a old thread, but hopefully someone has some info...
I have some old c.2014/15 Rossi FKS 18s and am looking to make them GW compatible. I think the AFDs Spyderjon posted above would kind of work with some modifications? Is that correct?
Are there any other solutions out there? Considering using one pair for a CAST setup but not sure what to do with the others...
Those work fine with the GW afd’s. PM if you want to trade, I’ve got tons of GW afds
Have to switch screws also. GW afd screws are longerQuote:
Originally Posted by deeds
Sent from my iPhone using TGR Forums
I swapped the (somewhat broken) alpine pedestal / AFD for GripWalk pedestal (the one I removed from the Pivot15 toe I Castified) on an identical binding yesterday, and it worked like a charm.Quote:
Originally Posted by deeds
If you are thinking Cast then just order the pedestal with a GripWalk AFD and a/multiple second ski kit/kits, and / or swap with mr_pretzel.
does anyone have the contact at look to order new afd's directly? thanks.
Look only ship to their retailers.Quote:
Originally Posted by scratchskier321
If you guys need em, we sell em at our shop:
https://www.slopestylebreck.com/pivo...pwalk-afd.html
Question about the FCIF010 GripWalk AFD replacement for Pivot 18s.
Does this part require a remount of my toe? The overall length of the FCIF010 part is much shorter than the stock alpine AFD part, so the existing toe screw holes are too far forward to rescrew the toe piece back in. So, I'd need to drill four new holes for each toe (assuming I'm not moving the heelpiece).
I’m guessing is “yes, duh”, so maybe I’m just confirming this is the right part. It looks right with the GW sole - just didn’t realized I’d need to put more holes in the ski.
Pic of FCIF010 (not screwed in) compared to stock.
https://uploads.tapatalk-cdn.com/202...b4a601f5ec.jpg
This part: https://www.slopestylebreck.com/pivo...4VP8Cp7hSsf7bl
Oh. And apparently source some longer screws for the thicker GW plate.
What screws do I need? This is starting to feel forced.
Sent from my iPhone using Tapatalk
Same mount pattern so dont worry about that and they should come with the screws. I think it’s 16mm but I have to check
No need to remount. The gw AFD just sits further ahead than the alpine one.
Sent fra min Pixel 8 Pro via Tapatalk
Thanks, Mags! Y’all were right - thanks for holding my hand.
Sourced some screws from my Local Bike and Ski Shop, Tahoe Sports Hub….andddd
Blammo! Let’s go pop off some shiiiiit
https://uploads.tapatalk-cdn.com/202...91b572f73d.jpg
Sent from my iPhone using Tapatalk